• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.379-388
• /
• 2020

The contents and scope of this study are to analyze the problems of the current radio service and radio station classification system, and to investigate the radio wave management cases in the United States to provide a reasonable and efficient radio wave management method. The results of this study can be used as basic data when revising the legal system regarding radio wave enforcement regulations, radio service and radio station classification standards. It is expected that in the future, a detailed commentary on the definition and classification system of new radio / radio stations will be prepared to increase policy compliance in practice, while contributing to enhancing the consistency and efficiency of radio station licensing and inspection.

• Journal of Navigation and Port Research
• /
• v.30 no.2
• /
• pp.161-166
• /
• 2006

In order to construct an Anechoic Chamber satisfying international standards for EMI testing, it has been recognized that the absorption characteristics of the EM wave absorber must be higher than 20 dB over the frequency band from 30 MHz to 18 GHz. In this paper, an EM wave absorber with super wide-band frequency characteristics was proposed and designed in order to satisfy the above requirements by using the Equivalent Material Constant Method(EMCM) and Finite Difference Time Domain(FDTD). The proposed absorber is to attach a pyramidal absorber onto a hemisphere-type absorber on a cutting cone-shaped ferrite. As a result, the proposed absorber has absorption characteristics higher than 20 dB over the frequency band from 30 MHz to more than 20 GHz.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.209-210
• /
• 2008

We have proposed a bow-tie UWB antenna using a U-shaped stub. The proposed antenna covers the entire ISM frequency (2.45 GHz) and DS-OFDM UWB band ($3.1\;{\sim}\;5\;GHz$). Simulated and measured results are found to be in good agreement with each other. The designed antenna has the figure-of-eight radiation pattern, wide bandwidth, dual-band, and negligible dispersion over the operating frequency band.

• Journal of electromagnetic engineering and science
• /
• v.8 no.1
• /
• pp.28-33
• /
• 2008

We have proposed a novel DVB-H(Digital Video Broadcast for Handheld) antenna for folder-type mobile handheld terminal by using a coupling element, a stub, and an L-type matching circuit. The L-type matching circuit consisting of two chip inductors is used for achieving an improved impedance matching over the DVB-H frequency band ($470{\sim}702\;MHz$). Simulated results showed the stub worked to more knot the lower and upper frequency ends of the input impedance curve. The antenna exhibits a flat gain characteristic from 2 to 2.8 dBi over the DVB-H frequency band. The radiation patterns are a stable Figure-of-eight radiation pattern in the frequency range.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.305-306
• /
• 2006

This paper introduces a radio-wave interference assessment of wind turbines that were planned to be installed at Homi-Cape in Pohang region where wind resource has been evaluated worthwhile developing a wind farm. In that area, AM radio station with two antennas and a harbor radar facility are located so that radio-wave coupling is inevitable if the wind farm is designed without considering radio-wave environmental impact. A low-frequency analysis using MoM (Method of Moment) is used to examine interference effect caused by wind turbines and an optimal layout minimizes coupling effect is presented.

• Journal of electromagnetic engineering and science
• /
• v.2 no.1
• /
• pp.16-21
• /
• 2002

On the contrary to the progress of the electronic industry and radio communication technologies, many social problems such as EMI, due to unnecessary electromagnetic(EM) wave are serious with the increased use of EM wave. It is required that the absorbing capability of an EM wave absorber is more than 20 dB, the bandwidth of which is required from 30 MHz to 18 GHz to satisfy the international standard about an anechoic chamber for EMI/EMS measurement$^{[1]}$TEX>. However, the absorbing frequency band of the conventional EM wave absorbers satisfying more than 20 dB is very narrow, for examples, from 30 MHz to 400 MHz in ferrite tile type and from 30 MHz to 870 MHz in ferrite grid type, respectively. In this paper, we proposed and designed a new tripe absorber with broadband characteristics covering the frequency band from 30 MHz to 10 GHz by use of the equivalent material constants method (EMCM)$^{[2]~[4]}$TEX>.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.3
• /
• pp.176-182
• /
• 2009

The dissertation on today information communication technique development consist according to new broadcasting and communication appearanced fusion-service in earnest legislation's change about broadcasting and communication regulate the while separation On that score, radio wave law's change on environment change has been lively producing.

• Journal of electromagnetic engineering and science
• /
• v.1 no.1
• /
• pp.95-99
• /
• 2001

According to the progress of the electronic industy and radio communication technologies, mankind might enjoy its abundant life On the other hand, many social problems such as EMI, and unnecessary electromagnetic wave occur due to the increased use of electromagnetic wave. Therefore, the organiztions such as CISPR, FCC, ANSl,etc. have provided the standard of electromagnetic wave enviroment for the countermeasure of the EMC. It had been required that the absorbing ability of an electromagnetic wave absorber is more than 20 dB, the bandwidth of which is required through 30 MHz to 1,000 MHz for satisfying the international standard about an anechoic chamber for EMI/EMS measurment. From November of 1998, however, the CISPRll has accepted the extended frequency band from 1 GHz to 18 GHz additionally in the bandwidth of EMI measurementent$^{[1]}$ . In this paper, we proposed a new type absorber satisfying the above requirements and carried out broadband design using the equivalent material constants method. Futheremore, the experiments were carried out over the frequency band from 30 MHz to 2 GHz, and hence, the validity of the proposed design theory was confirmed.

• Journal of electromagnetic engineering and science
• /
• v.4 no.2
• /
• pp.51-55
• /
• 2004

With the progress of the electronics industry and radio communication technology, certain problems, such as electromagnetic interference(EMI), have arisen due to the increased use of electromagnetic(EM) waves. International organizations such as CISPR, FCC, and ANSI have provided the standards for the EM wave environment and for the countermeasure of the electromagnetic compatibility(EMC). EM wave absorbers are used for constructing an anechoic chamber to test and measure EMI and electromagnetic susceptibility(EMS). In this paper, we have designed an one-body EM(electromagnetic) wave ferrite absorber, based on the equivalent material constants method for both normally and obliquely incident waves, whose absorption abilities are superior to that of the conventional ones. The fabricated absorber has a thickness of 27.68 mm and shows an absorption ability over 20 ㏈ in the frequency from 30 MHz to 6 ㎓.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.415-420
• /
• 2005

To construct an anechoic chamber for EMI test satisfying some international standards, it has been recognized that the absorption characteristics of the EM wave absorber must have more than 20 dB over the frequency band from 30 MHz to 18 GHz. In this paper, an EM wave absorber with super wide-band frequency characteristics was proposed and designed in order to satisfy the above requirements by using the EMCM[1]. As a result, the proposed absorber has absorption characteristics more than 20 dB over the frequency band from 30 MHz to more than 20 GHz.