• 제목/요약/키워드: Radio Frequency communication

검색결과 1,091건 처리시간 0.056초

FBAR 필터 응용을 위한 Al 하부전극 상에서 ZnO 박막 증착 및 온도가 ZnO 결정의 성장에 미치는 영향 (ZnO Film Deposition on Aluminum Bottom Electrode for FBAR Filter Applications and Effects of Deposition Temperature on ZnO Crystal Growth)

  • 윤기완;임문혁;채동규
    • 한국정보통신학회논문지
    • /
    • 제7권2호
    • /
    • pp.255-262
    • /
    • 2003
  • 본 논문에서는 FBAR(film bulk acoustic wave resonator) 필터 응용을 위해 Al 하부전극 상에서 RF magnetron sputtering 기술을 이용한 ZnO 박막 증착 및 공정온도가 ZnO 결정성장에 미치는 영향에 대한 연구결과를 발표한다 ZnO 박막의 압전특성은 FBAR 소자의 공진특성을 결정하는 가장 중요한 요소이고 압전성은 증착된 ZnO박막의 c축 우선배향성의 정도에 의해 결정된다는 사실을 고려한다면 ZnO 결정성장에 미치는 공정온도에 관한 연구는 매우 의미 있는 일이다. 본 실험을 통하여 ZnO 박막의 성장특성은 상온에서부터 35$0^{\circ}C$까지의 실험조건에서 c축 우선배향성의 정도에 따라 RF power에 관계없이 온도를 2개의 임계온도에 의해 나눠진 3개의 온도구간으로 구분할 수 있었다. 결과적으로 20$0^{\circ}C$ 이하의 공정온도에서는 주상형 결정립을 가진 c축 우선배향의 ZnO 박막을 얻을 수 있었다. 이렇게 얻은 ZnO박막을 사용하여 FBAR 다층박막 구조를 구현하였다.

RF Power에 따른 태양전지용 N-type ZnS 특성연구 (A Study on Properties of N-type ZnS Deposited at Various RF Power for Solar Cell Applications)

  • 양현훈;김한울;정운조;이석호;소순열;박계춘;이진;정해덕
    • 한국전기전자재료학회논문지
    • /
    • 제24권7호
    • /
    • pp.574-577
    • /
    • 2011
  • In this study, we use the $2.5cm{\times}7.5cm$ soda lime glass as the substrate. We used the ultrasonicator. Glass was dipped in the acetone, methanol and DI water respectively for 10 minutes. Ar(99.99%)gas was used as the sputtering gas. We varied the RF power between 100~175 W with 25 W steps. Base pressure was kept by turbo molecular pump at $3.0{\times}10^{-6}$ torr. Working pressure was kept by injection of Ar gas. ZnS thin films were deposited with the radio frequency magnetron sputtering technique at various temperatures and sputtering powers. It is also clearly observed that, the intensity of the (111) XRD peak increases with increasing the RF power. Electrical properties were measured by hall effect methods at room temperature. The resistivity, carrier concentration, and hall mobility of ZnS deposited on glass substrate as a function of sputtering power. It can be seen that as the sputtering power increase from 100 to 175 W, the resistivity of the films on glass decreased significantly from $8.1{\times}10^{-2}$ to $1.2{\times}10^{-3}\;{\Omega}{\cdot}cm$. This behavior could be explained by the effect of the sputtering power on the mobility and carrier concentration. When the RF power increases, the carrier concentration increases slightly while the resistivity decreases significantly. These variation originate from improved crystallinity and enhanced substitutional doping as the sputtering power increases.

Use of Unmanned Aerial Vehicle for Multi-temporal Monitoring of Soybean Vegetation Fraction

  • Yun, Hee Sup;Park, Soo Hyun;Kim, Hak-Jin;Lee, Wonsuk Daniel;Lee, Kyung Do;Hong, Suk Young;Jung, Gun Ho
    • Journal of Biosystems Engineering
    • /
    • 제41권2호
    • /
    • pp.126-137
    • /
    • 2016
  • Purpose: The overall objective of this study was to evaluate the vegetation fraction of soybeans, grown under different cropping conditions using an unmanned aerial vehicle (UAV) equipped with a red, green, and blue (RGB) camera. Methods: Test plots were prepared based on different cropping treatments, i.e., soybean single-cropping, with and without herbicide application and soybean and barley-cover cropping, with and without herbicide application. The UAV flights were manually controlled using a remote flight controller on the ground, with 2.4 GHz radio frequency communication. For image pre-processing, the acquired images were pre-treated and georeferenced using a fisheye distortion removal function, and ground control points were collected using Google Maps. Tarpaulin panels of different colors were used to calibrate the multi-temporal images by converting the RGB digital number values into the RGB reflectance spectrum, utilizing a linear regression method. Excess Green (ExG) vegetation indices for each of the test plots were compared with the M-statistic method in order to quantitatively evaluate the greenness of soybean fields under different cropping systems. Results: The reflectance calibration methods used in the study showed high coefficients of determination, ranging from 0.8 to 0.9, indicating the feasibility of a linear regression fitting method for monitoring multi-temporal RGB images of soybean fields. As expected, the ExG vegetation indices changed according to different soybean growth stages, showing clear differences among the test plots with different cropping treatments in the early season of < 60 days after sowing (DAS). With the M-statistic method, the test plots under different treatments could be discriminated in the early seasons of <41 DAS, showing a value of M > 1. Conclusion: Therefore, multi-temporal images obtained with an UAV and a RGB camera could be applied for quantifying overall vegetation fractions and crop growth status, and this information could contribute to determine proper treatments for the vegetation fraction.

다중 홉 RF 에너지 하베스팅 네트워크에서 지연에 민감한 데이터 전송을 위한 간섭 인지 기반 에너지 효율적인 라우팅 프로토콜 (Energy-Efficient Routing Protocol based on Interference Awareness for Transmission of Delay-Sensitive Data in Multi-Hop RF Energy Harvesting Networks)

  • 김현태;나인호
    • 한국콘텐츠학회논문지
    • /
    • 제18권3호
    • /
    • pp.611-625
    • /
    • 2018
  • 최근 무선 통신 기술의 혁신적인 발전에 따라 에너지 하베스팅을 통해 네트워크 수명을 영구적으로 연장하기 위한 네트워크 자원 최적화, QoS 보장 전송 기법, 에너지 지능적 라우팅 등의 연구가 활발히 진행되고 있다. 잘 알려진 바와 같이 다중-홉 RF 에너지 하베스팅 무선 네트워크에서는 수확되는 에너지양의 불확실성 때문에 종단간 네트워크 전송 지연 시간을 보장하기 어려운 문제가 발생한다. 본 논문에서는 다중 홉 에너지 하베스팅 무선 네트워크에서 종단간 지연 시간을 최소화하기 위하여 상호채널 간섭(co-channel interference)으로 인한 지연, 에너지 하베스팅 시간으로 인한 지연 그리고 중계 노드에서의 큐잉 지연을 종합적으로 고려한 간섭 인지 기반의 에너지 효율적인 라우팅 메트릭과 프로토콜을 제안한다. 제안된 기법은 부하 불균형을 유발하는 패킷 혼잡을 회피하고 에너지 고갈로 인한 노드의 대기 시간을 줄이며 링크 간의 간섭으로 지연시간이 증가되지 않도록 함으로써 종단간 처리량을 최대화한다. 마지막으로 ns-3 시뮬레이터를 이용하여 처리율, 종단간 지연시간, 에너지 소비량 등의 측면에서 제안된 기법의 성능을 측정하여 기존에 제안된 기법보다 성능이 우수함을 증명한다.

USRP RIO SDR을 이용한 5G 밀리미터파 LTE-TDD HD 비디오 스트리밍 시스템 설계 및 구현 (Design and Implementation of 5G mmWave LTE-TDD HD Video Streaming System for USRP RIO SDR)

  • 곽경훈;신봉득;박동욱;어윤성;오혁준
    • 한국전자파학회논문지
    • /
    • 제27권5호
    • /
    • pp.445-453
    • /
    • 2016
  • 본 논문은 3GPP LTE(Long Term Evolution)-TDD(Time Division Duplexing) 표준을 기반으로 NI(National Instruments)의 USRP RIO SDR(Software Defined Radio) 플랫폼을 이용해 28 GHz 밀리미터파 대역에서 HD 비디오를 무선으로 송수신하는 1T-1R(1 Transmitter-1 Receiver) 시스템을 설계 및 구현하였다. 해당 시스템은 Verilog로 설계한 LTE-TDD 송수신 모뎀을 USRP RIO에 내장된 Xilinx Kintex-7칩에 구현하여 USRP RIO를 베이스밴드로 사용하였으며, USRP RIO에서 송수신되는 신호는 자체 설계한 28 GHz RF 송수신 모듈로 업 다운 변환을 수행한 후 자체 설계한 $4{\times}8$ 서브 배열 안테나를 통해 최종적으로 HD 비디오 데이터를 통신하게 된다. USRP RIO와 Host PC의 통신 방식은 데이터 송수신시 발생되는 지연을 최소화하기 위해 PCI express(Peripheral Component Interconnect express)${\times}4$를 사용하였다. 구현한 시스템은 25.85 dBc 이상의 높은 EVM(Error Vector Magnitude) 성능을 보였으며, 실험환경 내 어디서든 HD 비디오를 성공적으로 송수신 하였다.

상황 분석 방법론을 적용한 효율적 비즈니스 프로세스 모델링 방안에 관한 연구 (Study on the Business Process Modeling scheme using the Context Analysis methodology)

  • 유치형;성경상;김정재;나원식
    • 디지털콘텐츠학회 논문지
    • /
    • 제9권4호
    • /
    • pp.661-667
    • /
    • 2008
  • 비즈니스의 역동성은 매 해마다 새로운 기술도입으로 인한 거시경제적 힘에 의해 변화되어 왔다. 이러한 역동성은 기업의 정보통신 투자에도 막대한 영향을 끼치고 있다. 오늘날 IT투자의 가장 중요한 목표는 단순히 생산비용을 낮추는 것이 아니라, 최적화된 대량 생산을 위해 고객들과 파트너들에게 기업의 유용성을 높이는 데 있다. 따라서 기업들은 확장된 기업의 프로세스를 자동화하고, 통합하고 최적화 하기 위해 BPM을 통한 모든 역량을 집중하고 있다. 또한 RFID 응용시스템을 이용하여 기술적 측면에 접근함으로써 비즈니스 확장을 위한 시스템 개발에 주력하고 있다. 그러나 기술적 측면, 비즈니스 프로세스적 측면, 조직적 측면을 함께 고려하여야 성공적인 기업 역량을 이룰 수 있다. 따라서 본 논문에서는 기술적 요소인 RFID 시스템을 통해 조직적인 측면을 고려하여 비즈니스 프로세스에 접근하기 위한 접근 방법론을 제안하였다. 또한, 상황 분석 방법론을 적용하여 업무 분류에 따른 최적화를 꾀하고자 하였으며, 전송된 관련 프로세싱 절차 및 형식을 통해 이후 발생되는 반복적 과정을 최소화할 수 있는 사례 기반 방식을 활용함으로써 시간 인력 비용 요소를 절감할 수 있었다. 제안한 방법론을 통해 비즈니스 프로세스 분석에서부터 시스템 설계 및 분석에 따른 시간 비용 품질 및 고객의 만족 수준에 혁신적인 개선을 이끌어낼 수 있기를 기대할 수 있었다.

  • PDF

자전거 주행의 진동 분석에 기반한 에너지 수확 증진 기술 개발 (Enhanced Energy Harvester Based on Vibration Analysis of Bicycle Riding)

  • 여정진;유문호;김정자;양윤석
    • 전자공학회논문지SC
    • /
    • 제49권1호
    • /
    • pp.47-56
    • /
    • 2012
  • 자전거는 균형을 유지하며 빠른 속도로 주행하는 과정에서 여러 형태의 상당한 운동 에너지가 내재되어 있어, 에너지 수확기술을 적용하는데 있어 큰 장점을 갖는 이동형 플랫폼이다. 자전거에 에너지 수확 기술을 적용해 높은 출력을 얻기 위해서는 주행 중인 자전거의 운동 특성을 면밀히 관찰하고 이해하는 것이 필요하지만 실제 도로를 주행하는 자전거의 움직임을 정밀하게 측정한 연구나 이를 위한 전용의 측정 장치는 거의 없는 실정이다. 본 연구는 MEMS 기반의 가속도 센서를 이용하여 주행 중인 자전거의 동적 상태를 측정하고 이를 토대로 자전거 주행에 동반되는 에너지의 특성을 분석함으로써 이에 적합한 에너지 수확 증진 기술을 개발하는 것을 목적으로 하였다. 일반 자전거를 이용한 도로 주행 실험에서 주행 속도와 무관한 주파수 특성을 갖는 평균 1g 전후의 잉여 진동 에너지가 수반됨을 확인하였으며, 임의진동 에너지의 효과적인 수확을 위해 비선형 특성을 갖는 자기부상형 전자기 유도 방식의 에너지 수확기 프로토타입을 개발하였다. 개발된 에너지 수확기를 자전거에 장착하여, 휴대용 센서 및 근거리 무선 통신 모듈의 구동이 가능한 평균 1.5 mW 의 전력 생산을 검증하였다. 현재 자전거 차체의 진동분리 및 변환 효율 향상을 위한 연구가 진행 중이며, 향후 증진된 출력을 바탕으로 각종 스마트 정보 기기의 지속적인 전력공급을 위한 기반 기술이 될 것으로 기대한다.

효율적인 후판 재고관리를 위한 RFID 스캐닝 로봇 시스템 개발 (Development of Robotic System based on RFID Scanning for Efficient Inventory Management of Thick Plates)

  • 이광형;민소연;이종희
    • 한국산학기술학회논문지
    • /
    • 제17권10호
    • /
    • pp.1-8
    • /
    • 2016
  • 본 제철 공장의 후판 재고관리 자동화는 오래전부터 해결하지 못한 난제이었으며, 현재도 효율적인 후판 재고관리를 위해 제철업계에서 부단히 노력 중에 있다. 그동안 후판 적재의 환경적 특성 상 후판의 자동 인식을 위해 진보된 기술 적용이 쉽지 않았다. 본 논문에서는 자동 인식이 어려운 적재 상태에서 후판의 RFID 태그를 자동으로 스캔하여 인식한 후 후판 정보를 취득함으로써 신속하고 정확한 후판의 재고관리가 가능한 RFID기반 후판 스캐닝 로봇 시스템을 제안한다. RFID기반 후판 스캐닝 로봇 시스템은 후판을 끌어올려 이동시키는 크레인에 장착되어 운용된다. 후판에 부착된 태그 정보를 자동으로 식별하기 위해 후판 태그 전용으로 개발된 후판 전용 리니어 다이폴 안테나를 탑재하였고, 후판 전용 리니어 다이폴 안테나가 x축과 y축을 이동하면서 후판 태그의 위치를 스캐닝함으로써 태그의 정보를 취득한다. 시스템에 의해 취득된 태그 정보는 개발된 후판 재고관리 소프트웨어에 의해 재고 및 적치관리에 이용된다. 제안한 시스템은 개발되어 현장 성능평가를 통해 시스템의 효율성을 검증하였으며, 후판태그 인식율은 99.9%, 최대 인식거리는 320cm의 실험 결과를 보여 기존 상용 안테나에 비해 개발된 후판 전용 안테나의 성능이 우수한 것으로 나타났다.

초소형 드론 탑재용 GPS 대역 마이크로스트립 안테나의 소형화 (Miniaturization of GPS Microstrip Antenna for Small Drone)

  • 김완기;우종명
    • 한국ITS학회 논문지
    • /
    • 제21권3호
    • /
    • pp.62-72
    • /
    • 2022
  • 본 논문에서는 초소형 드론에 탑재가 가능하도록 소형화한 GPS 대역(L1 대역 중심 주파수 : 1.575 GHz) 안테나를 제안하였다. 소형화는 λ/4 마이크로스트립 안테나를 기저로 섭동법을 적용시키고, 패치 가장자리의 전류 길이를 길게 하는 개념으로 실현시켰다. 제안된 안테나는 10 mm × 9 mm × 10 mm(0.05 λ × 0.05 λ × 0.05 λ) 크기의 스티로폼(εr=1.06, 두께=10 mm) 표면에 장착 가능한 인쇄형으로 제작하였다. 임피던스 매칭을 위해 급전 선로의 두께 및 길이, 단락 스터브 간의 간격을 조절하였으며, 그 결과, 제작된 안테나는 중심주파수 1.575 GHz에서 S11은 -38.6 dB를 얻었으며, 방사 패턴 측정 결과, 0° 방향에서 xz-plane의 Eθ 성분 이득 1.87 dBi, yz-plane의 Eθ 성분 이득 -1.7 dBi의 특성을 얻었다. 결과적으로, λ/2 마이크로스트립 패치 안테나와 비교하여 98.8 %의 체적 축소율을 확보함으로써, 초소형 드론에 탑재가 가능한 GPS 안테나로써 활용이 가능함을 제시하였다.

THE CURRENT STATUS OF BIOMEDICAL ENGINEERING IN THE USA

  • Webster, John G.
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1992년도 춘계학술대회
    • /
    • pp.27-47
    • /
    • 1992
  • Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.

  • PDF