• 한국통신학회논문지
• /
• 제30권12C호
• /
• pp.1201-1207
• /
• 2005

전자전장비는 송수신기간의 이격이 충분하지 않을 경우, 송신기에서 방사된 잡음재밍신호는 수신기로 피드백되어 레이더 펄스신호의 수신을 방해한다. 이로 인해, 동일 주파수 대역내에서 펄스재밍과 잡음재밍을 동시에 수행할 수 없다. 본 논문에서 펄스열의 예측게이트를 이용하여 잡음재밍신호를 차단하고 동시에 해당 채별 필터를 동작시켜 레이더 펄스신호를 수신할 수 있는 스위치 메트릭스를 이용한 시분할 송수신 제어기법을 제안한다. 이 기법은 전자전장비의 EPLD 내에 구현되어 실험을 통해 확인되었으며, 다중 재밍환경에서도 동시에 펄스재밍과 잡음재밍을 가능하도록 해준다.

• 한국전자파학회지:전자파기술
• /
• 제6권4호
• /
• pp.28-36
• /
• 1995

PCB의 전자파 복사는 전자 회로 설계에서 중요한 문제로 부각되고 있는데, PCB의 전자파 복사를 감소시키는 한 방법으로 영상 평면의 사용이 고려되고 있다. 본 논문은 PCB 전류 라인의 전자파 복사에 미치는 영상평면의 영향을 해석한 것으로, 전류 라인 아래, 위로 한 층 및 두 층식 영상 평면을 둔 구조에 대해 수치해석적으로 영상 평면에 의한 전자파 감쇠효과를 계산 하였다. 영상 평면에 유도되는 전류 분포를 모멘트 기법을 이용 하여 구했으며 전자파 복사 패턴을 서로 다른 영상 평면 구조와 비교하였고, 영상 평면의 폭과 전류 라인과 영상 평면 가이의 간격 및 신호 전류의 주파수가 최대 복사 전계에 미치는 영향을 분석하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.812-819
• /
• 2007

Acoustic Target Strength (TS) is a major parameter of the active sonar equation, which indicates the ratio of the radiated intensity from the source to the re-radiated intensity by a target. This research provides the time pattern of TS in time domain, which is applicable to pulse modulated acoustic pressure field. If the time pattern of TS is predicted by using TS equation in frequency domain, it takes long time and difficult since time function pulsed acoustic wave may be decomposed into their frequency domain components. But TS equation in time domain has a convenience. If the expression for pulsed acoustic field has been obtained, the problem can be solved. Furthermore this paper introduces about mathematical equivalence quantities between EM wave and Acoustic Wave.

• 한국전기전자재료학회논문지
• /
• 제26권4호
• /
• pp.309-314
• /
• 2013

This paper dealt with the radiated electromagnetic wave detection of partial discharge (PD) in oil for insulation diagnostics of oil-immersed transformers. Three types of electrode system were fabricated to simulate the insulation defects that could occur in oil-immersed transformers. Frequency components of radiated electromagnetic wave in oil was measured by broadband bi-conical antennas of 300 MHz~2 GHz and a spectrum analyzer of 9 kHz~3 GHz. Frequency component of electromagnetic waves from PD in oil were highly distributed at 500 MHz. From the result, a narrow-band monopole antenna with the center frequency of 500 MHz was fabricated. We could detect PD signal in insulation oil without an influence of external noise by a measurement system which consists of the prototype monopole antenna, a LNA (Low Noise Amplifier), an oscilloscope and a spectrum analyzer.

• Journal of Magnetics
• /
• 제13권3호
• /
• pp.92-96
• /
• 2008

There are few reports of high frequency loss behavior in the near-field for magnetic films with semiconducting properties, even though semiconducting magnetic materials, such as soft magnetic amorphous alloys and nanocrystalline thin films, have been demonstrated. The electromagnetic loss behavior of multilayer magnetic films with semiconducting properties on the microstrip line in quasi-microwave frequency band was analyzed numerically using a commercial finite-element based electromagnetic solver. The large increase in the absorption performance and broadband characteristics of the semiconducting/insulating layer magnetic films examined in this study were attributed to an increase in the loss factor of resistive loss. The electromagnetic reflection increased significantly with increasing conductivity, and the loss power deteriorated significantly. The numerical results of the magnetic field distribution showed that a strong radiated signal on the microstrip line was emitted with increasing conductivity and decreasing film thickness due to re-reflection of the radiated wave from the surface of the magnetic film, even though the emitted levels varied with film thickness.

• 대한조선학회논문집
• /
• 제61권1호
• /
• pp.1-7
• /
• 2024

Underwater sound speed is an important analysis parameter on an estimation of the underwater radiated noise (URN) emitted from vessels. This paper aims to present an underwater sound speed measurement procedure using a cross-correlation of time-domain acoustic signals and validate the procedure through an experiment in a reverberant water tank. For the purpose, time-domain acoustic signals transmitted by a Gaussian pulse excitation from an acoustic projector have been measured at 20 hydrophone positions in the reverberant water tank. Then, the sound speed in water has been calculated by a linear regression using 190 cross-correlation cases of distances and time lags between the received signals and the result has been compared with those estimated by the existing empirical formulae. From the result, it is regarded that the presented experimental procedure to measure an underwater sound speed is reliably applicable if the time resolution is sufficiently high in the measurement.

• 한국항행학회논문지
• /
• 제28권2호
• /
• pp.225-231
• /
• 2024

본 논문에서는 기존의 밀리미터파 안테나 시스템의 기능을 개선하기 위한 새로운 접근법을 제시한다. 장치의 주어진 기하학적 구조 및 고정된 전기적 특성에 적합한 메타물질 표면을 설계함으로써, RF 제품의 방사 필드들의 지향성 및 더 높은 이득을 갖도록 한다. 단일 패치에 대해 주기적 메타물질을 사용하는 다른 설계와 달리, 비주기적 메타표면은 2개의 패치를 처리할 수 있다. 24GHz-라디오 링크에서 더 높은 수신 신호 강도 및 더 긴 RF 경로에 대해, 비주기적 메타표면은 방사 필드들을 10 dB 향상시킨다.

• 센서학회지
• /
• 제21권6호
• /
• pp.429-433
• /
• 2012

In this paper, we reduced the optical noise interference in a visible light communication system using two color LEDs. In the transmitter, the original and the inverted signals of the transmitted data modulated a red LED and a blue LED, respectively. In the receiver, a differential detector which is composed of two photodetectors and an optical red filter detected the mixed signal radiated from the two LEDs. In an environment that the optical noise from a fluorescent lamp exists, the signal-to-noise ratio in this system was improved by about 20dB compared to that in the conventional system which uses a single LED and a single photodetector.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권3호
• /
• pp.248-251
• /
• 2014

As more vehicles become equipped with advanced electronic control systems, more consideration is needed with regards to automotive safety issues related to the effects of electromagnetic waves. Unwanted electromagnetic waves from the antenna, electricity and other electronic devices cause the performance and safety problem of automotive components. In general, Power Integrity and Signal Integrity analysis have been widely used, but these analyses have stayed PCB level. PCB base analysis is different from radiated emission TEST condition so its results are used just for reference. This paper proposes EMC optimization technology using module level 3-dimensional radiation simulation process closed to fundamental test conditions. If module level EMC analysis, which is proposed in this study, is applied to all automotive electronics systems, unexpected EMC noise will be prevented.

• 한국음향학회지
• /
• 제2권1호
• /
• pp.11-19
• /
• 1983

An irregulary formed chamber was designed and constructed to recognize the direct sound radiated from the sound source and the reflected sound from the walls of the chamber. The sound signal used was tone burst in the frequency response characteristics with the signal detection after transient effect. The direct wave, transient phenomena and the primary reflected sound could be asiily distinguished each other by measurements of the arrival time of the time difference. And also noise could be easily distinguished by the same method. The result obtained can be used in industries for automatic measurement of the sound pressure reponse characteristics with respect to frequencies.