• Title/Summary/Keyword: Radial stub

Search Result 16, Processing Time 0.027 seconds

Bandpass Filter Using Dual-mode Resonator with Radial Stub (래디얼 스터브를 통해 구현된 이중 모드 공진기를 이용한 대역 통과 필터)

  • Yun, Tae-Soon
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.10 no.3
    • /
    • pp.74-78
    • /
    • 2011
  • In this paper, the bandpass filter for ITS system of 5.8 GHz is proposed by using the dual-mode resonator with the radial stub. As alternating the open stub with the radial stub, the size of the dual mode resonator can be reduced about 39.6% and the out-of-band characteristics of the bandpass filter using dual mode resonator can be enhanced from 19.4 dB to 29.1 dB by using the stub of $6.9{\Omega}$ i.e. realized by parallel two radial stubs with $60^{\circ}$ angle. The fabricated bnadpass filter using the dual mode resonator has the center frequency of 5.72 GHz with the fractional bandwidth of 4.1%. Also, the filter has the insertion loss and return loss of 1.79 dB and 19.4 dB, respectively.

Design and Modeling of the Embedded Meander line and Radial/T Stub for low-cost SOP (저가용 SOP를 위한 적층형 Meander와 Radial/T Stub의 설계와 모델링)

  • Cheon, Seong-Jong;Yang, Chang-Soo;Lee, Seung-Jae;Park, Jae-Yeong
    • Proceedings of the KIEE Conference
    • /
    • 2006.07c
    • /
    • pp.1591-1592
    • /
    • 2006
  • 이동 및 정보통신 시스템이 소형화 및 고성능화됨에 따라 System OR Package (SOP) 기술의 연구개발이 주목을 받고 있다. 저가형 SOP를 위하여 가장 많은 연구가 다층인쇄회로 기판에 수동소자 및 전송선로를 내장시키는 것이다. 본 논문에서는, 8층 KB 기판에 Meander line과 Radial/T Stub 패턴을 Advanced Design System(ADS) simulation을 이용하여 설계 및 제작하고 분석함으로써 정확한 SOP 디자인 및 설계 방향을 제시하고자 한다. 설계변수-패턴의 length, width, spacing, 각도와 공정변수-1층/3층, 기판 재질(prepreg(PP)과 resin coated copper(RCC))을 두어 제작하여 그 특성을 비교하였다. Meander Line는 PP보다 RCC에서의 인덕턴스가 크고 높은 자가 공진주파수를 가졌고, 3층보다 1층에서의 인덕턴스가 안정적이었다. Radial/T Stub는 PP보다 RCC에서의 커패시턴스가 작으나, 높은 자가 공진 주파수로 커패시턴스가 안정적이었다. Meander Line은 RCC, 병렬 전송선로 간격-400um, 병렬 전송선로 길이-500um, 1층 설계 시, 인덕턴스-1.60nH, 자가 공진주파수-9.21GHz 특성이 가장 우수하고, Radial Stub는 RCC, $60^{\circ}$, 1층 설계 시, 커패시턴스-0.62pF, 자가 공진주파수-9.06GHz의 특성이 나타났고, T Stub는 RCC, Stub 길이-600um, Stub 너비-150um, 1층 설계 시, 커패시턴스 -0.38pF, 자가 공진주파수-10GHz이상으로 우수한 특성을 나타냈다.

  • PDF

Design of the Electromagnetically Coupled Broadband Microstrip Antennas with Radial Tuning Stub (방사형 동조 스터브를 갖는 전자기결합 광대역 마이크로스트립 안테나의 설계)

  • 김정렬;윤현보
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.7 no.1
    • /
    • pp.26-35
    • /
    • 1996
  • In this paper, characteristics of the electromagnetically coupled broadband microstrip antennas are analyzed by the Finite Difference Time Domain (FDTD) method, and antenna para- meters are optimized to get maximum bnadwidth. By using short radial tuning stub in microstrip feedline, electromagnetically coupled microstrip antenna shows broadband ($\simeq$13%) characteristics, and the characteristics are varied as a function of radius, radial angle, and position of the radial tuning stub. Operating frequency, return loss, VSWR and input impedance are calculated by Fourier transforming the time domain results. After optimization of the parameters, maximum bandwidth of the radial stub tuning microstrip antenna is about 15% and the ripple char- acteristic of the VSWR is better than the rectangular tuning stub microstrip antenna.

  • PDF

A Low-pass Filter with Wide-stop Band Using Radial-shaped Open Stub (광대역의 저지대역을 갖는 부채꼴 형태의 개방형 스터브를 이용한 저역통과 여파기)

  • Yoon, Ki-cheol;Kim, Seong-cheol
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.20 no.7
    • /
    • pp.1237-1242
    • /
    • 2016
  • In this paper, the low pass filter with harmonics suppression and rejection using parallel coupled-line and radial type open stub is presented. And the resultant characteristic of the proposed low pass filter is that the harmonics are suppressed and rejected in wide bandwidth due to the parallel coupled-line structure. The open stub of a low pass filter is constructed in radial type which can be used to adjust the size of filter. The size of the proposed low pass filter is $6.98{\times}7.60mm2$ and the cut off frequency is 2.45 GHz. And the filter is economical in unit cost and can be constructed easily and has the merit of mass product because the filter is composed of distributed element. Also, the widely rejected harmonics is 128 % in the bandwidth and the insertion and return losses of the low pass filter are 1.07 dB and 19.5 dB, respectively.

Grounding Radial Stub for the Vertical Microstrip Transition (수직으로 전이되는 마이크로스트립의 접지용 방사형 스터브)

  • Gwon, Deok-Gyu;Lee, Jong-Ho;Lee, Hae-Yeong
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.37 no.3
    • /
    • pp.58-63
    • /
    • 2000
  • For the microwave high density devices and modules of the 3D configuration, we proposed radial stub for the ground connection. The proposed structure is analyzed by the full-wave analysis of finite element method (FEM) and characterized experimentally. The results show that the return loss is more than 15 dB and the insertion loss is less than 0.5 dB in the frequency range from 2.5 GHz to 6.3 GHz. The proposed grounding scheme will be useful for the ground connection lot the microwave high density devices and module of 3D configuration.

  • PDF

Closely Spaced Two-Element Folded-Dipole-Driven Quasi-Yagi Array

  • Ta, Son Xuat;Kang, Sang-Gu;Park, Ikmo
    • Journal of electromagnetic engineering and science
    • /
    • v.12 no.4
    • /
    • pp.254-259
    • /
    • 2012
  • This paper presents a closely spaced two-element folded-dipole-driven quasi-Yagi array with low mutual coupling between adjacent elements. The antenna utilizes a T-junction power divider as the feeding network, with an input impedance of $50{\Omega}$. A microstrip-stub is added to the ground plane in the middle of the two elements to improve the mutual coupling characteristics. The folded dipole driver is connected to a $50{\Omega}$ microstrip line via a broadband microstrip-to-coplanar stripline transition with a quarter radial stub. A mutual coupling of less than -22 dB is measured between two folded-dipole-driven quasi-Yagi antennas with a center-to-center spacing of 30 mm ($0.55{\lambda}_0$ at 5.5 GHz). The proposed quasi-Yagi array yields a measured bandwidth of 4.75~6.43 GHz for the -10 dB reflection coefficient and a gain of 6.14~7.12 dBi within the bandwidth range.

An Efficient Design of a DC-Block Band Pass Filter for the L-Band

  • Kaur, Avneet;Malhotra, Jyoteesh
    • Transactions on Electrical and Electronic Materials
    • /
    • v.18 no.2
    • /
    • pp.62-65
    • /
    • 2017
  • In this paper, three DC Block designs are presented which efficiently meet the need of modern-day compactsize wireless communication systems. As one of the important parts of a complete system design, the proposed microstrip-based DC block with coupled transmission lines efficiently attenuates unwanted frequencies that cause damage to the system. The compact-sized DC block structures are created by incorporating an extended coupled-line section with a radial stub, an enveloped coupled-line section, and using alternate up-down meandering techniques. The structures are analyzed for the L-Band using a high-resistive silicon substrate. At a resonating frequency of 1.575 GHz, the designed DC Block structures have a return loss better than -10 dB, an insertion loss of around -1 dB, and also possess wide pass-band characteristics.

Wideband Double Dipole Quasi-Yagi Antenna Using a Microstrip-to-Slotline Transition Feed

  • Ta, Son Xuat;Park, Ikmo
    • Journal of electromagnetic engineering and science
    • /
    • v.13 no.1
    • /
    • pp.22-27
    • /
    • 2013
  • This paper describes a wideband double dipole quasi-Yagi antenna fed by a microstrip-to-slotline transition. The transition feed consists of a microstrip radial stub and a slot radial stub, each with the same angle of $90^{\circ}$ but with different radii, to achieve wideband impedance matching. Double dipoles with different lengths are utilized as primary radiation elements to enhance bandwidth and achieve stable radiation patterns. The proposed antenna has a measured bandwidth of 3.34~8.72 GHz for a -10 dB reflection coefficient and a flat gain of $6.9{\pm}0.6$ dBi across the bandwidth.

Multi-harmonic Suppression Band-Pass Filter for Communication System

  • Zhang, Wenmei;Han, Liping;Ma, Runbo;Mao, Junfa
    • ETRI Journal
    • /
    • v.29 no.4
    • /
    • pp.533-535
    • /
    • 2007
  • For the purpose of decreasing intermodulation distortion, a new multi-harmonic suppression band-pass filter based on a microstrip radial stub is studied. Compared with traditional resonator filters, the new filter can suppress the second, third, and even fourth harmonics directly. The dimension of the filter is about $0.3\;{\lambda}_{g^0}{\times}0.13\;{\lambda}_{g^0}$ (${\lambda}_{g^0}$ is the guiding wavelength at the resonant frequency). Only one gap was introduced, so lower insertion loss can be obtained. Basic agreement between the measured and simulated results has been achieved.

  • PDF

Low Phase Shift Attenuator Using the Half-Moon Radial Stub (반달 모양의 방사형 동조 스터브를 이용한 저위상 변화 감쇠기의 설계)

  • 윤종만;양기덕;김민택;박익모;신철재
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.8 no.5
    • /
    • pp.452-461
    • /
    • 1997
  • In this paper, we present a computer-aided design(CAD) technique for minimizing the phase shift in microstrip PIN diode attenuators due to the junction capacitance in the equivalent circuit model of PIN diode. Microstrip PIN diode attenuators use the characteristics which the reactance of microstrip line changes from inductive to capacitive as the frequency sweeps across the band. Microstrip PIN diode attenuator designed utilizes the quarter-wavelength transmission line terminating with the half-moon radial stub, which is designed for negligible phase shifting effect over the intersted bandwidth. The attenuator has similar phase shift at 0 dB and 10 dB of attenuation within average $1.27^{\circ}$ between 1.2GHz and 1.9GHz. The input and output return losses between 1.4 GHz and 1.9 GHz are less than 10 dB over the attenuation range of 0 dB and 10 dB.

  • PDF