• 제목/요약/키워드: Radar vehicle detector

검색결과 21건 처리시간 0.021초

두 기능을 갖는 차량검지 레이다 (Development of Two Types of Radar Vehicle Detectors)

  • 김인석;김기남
    • 한국항행학회논문지
    • /
    • 제7권2호
    • /
    • pp.108-117
    • /
    • 2003
  • 본 논문에서는 현재 도로상에서 이용되고 있는 루프감지기 체계와 호환성을 가지는 두 종류의 레이더 기술을 이용한 차량감지기를 개발하였다. 이 두 종류는 24 GHz의 FMCW 고도계와 도플러 속도계 기술을 이용하여 도로상의 차량의 길이와 속도정보를 알아낼 수 있는 비매설형의 차량감지기이다. 신호처리에는 DAQ 보드를 사용하였고, 응용소프트웨어인 LabView로 프로그래밍 하였다. 기존의 루프감지기와 연결된 교통정보 네트웍과의 호환성을 위해 RS-232C 표준인터페이스를 이용하여 VDS(Vehicle Detector System)로 차량 관련 데이터를 전송하였다. 속도와 차량길이 정보의 정확도에 있어서 기존 루프감지기를 실험장에 설치한 결과보다 약 10% 정도 향상되었음이 측정되었다.

  • PDF

Development of a Multiple Linear Regression Model to Analyze Traffic Volume Error Factors in Radar Detectors

  • Kim, Do Hoon;Kim, Eung Cheol
    • 한국측량학회지
    • /
    • 제39권5호
    • /
    • pp.253-263
    • /
    • 2021
  • Traffic data collected using advanced equipment are highly valuable for traffic planning and efficient road operation. However, there is a problem regarding the reliability of the analysis results due to equipment defects, errors in the data aggregation process, and missing data. Unlike other detectors installed for each vehicle lane, radar detectors can yield different error types because they detect all traffic volume in multilane two-way roads via a single installation external to the roadway. For the traffic data of a radar detector to be representative of reliable data, the error factors of the radar detector must be analyzed. This study presents a field survey of variables that may cause errors in traffic volume collection by targeting the points where radar detectors are installed. Video traffic data are used to determine the errors in traffic measured by a radar detector. This study establishes three types of radar detector traffic errors, i.e., artificial, mechanical, and complex errors. Among these types, it is difficult to determine the cause of the errors due to several complex factors. To solve this problem, this study developed a radar detector traffic volume error analysis model using a multiple linear regression model. The results indicate that the characteristics of the detector, road facilities, geometry, and other traffic environment factors affect errors in traffic volume detection.

Confirmation Method of Target Detection for Vehicle Mounted Metal Detector

  • Jung, Byung-Min;Shin, Beom-Su;Chang, YuShin;Yang, DongWon
    • 한국컴퓨터정보학회논문지
    • /
    • 제21권10호
    • /
    • pp.49-54
    • /
    • 2016
  • In this paper, the confirmation method of target detection for the vehicle mounted metal detector (MD) has been described. The vehicle mounted MD with the arrayed 6 coils to detect the width of 2.4 m was demonstrated. It is important and necessary to inform the location of the objects detected by the MD. The confirmation method of target detection was verified by using the MD GUI and the analysis of the receive signal processing. The receive signal processing is performed by comparing the threshold and the difference of the signal calibrated at initial location and the signal detected at present location.

Short Range Rear Obstacle Detector for Automobile Using 24GHz AM Radar Sensor

  • Kim, Young Su;Choi, Yun Ho;Han, Soo Deog;Bien, Franklin
    • 대한임베디드공학회논문지
    • /
    • 제6권5호
    • /
    • pp.281-286
    • /
    • 2011
  • FMCW Radar sensor is commonly used for an automobile collision avoidance system for rider's safe. Systems using FMCW radar, however, would be one of expensive solutions for just simple rear obstacle detection purpose due to its high cost. In this letter, a short range rear obstacle detector using novel 24GHz AM radar sensor is presented. It can be implemented at significantly lower cost than FMCW radar for practical commercialization. The proposed AM radar sensor module is fabricated in a single aluminum housing to reduce the overall size while using single power supply voltage of 12V with 1200mA current for automotive applications. The measured detection range is up to 210cm with 10cm of distance resolution, which is suitable for a parking assistance system for automobiles.

FMCW 레이더 검지기 신호교차로 적용성 평가 (Applicability Evaluation of FMCW Radar Detector on Signal Intersections)

  • 고광용;김민성;이철기;정준하;허낙원
    • 한국ITS학회 논문지
    • /
    • 제14권1호
    • /
    • pp.1-12
    • /
    • 2015
  • 매설형 검지기는 검지 성능이 타 검지기에 비해 우수하지만, 설치 및 관리비용이 클 뿐 아니라 도로의 재포장이나 도로파손으로 인해 수명이 짧다는 단점이 있다. 이에 반해 기존 지주에 부착하여 사용하는 검지시스템인 비매설형검지기는 도로 노면을 손상시키지 않기 때문에 설치가 쉽고, 유지관리비용이 적다는 장점이 있다. 비매설식 검지기는 이러한 장점에도 불구하고, 검지 성능이 낮아 아직까지 신호제어용으로 사용하지 못하는 실정이다. 본 연구에서는 비매설형검지기 중에 정확도가 가장 높은 FMCW 방식의 레이더에 대해 성능평가를 수행하고, 신호제어용 검지용도별로 현장적용 유/무 결과를 제시하였다.

CW 레이다와 자계기술을 복합한 새로운 차량검지기 개발 (Development of a New Vehicle Detector Combining CW Radar and Magnetometer Techniques)

  • 정재영;김인석
    • 한국전자파학회논문지
    • /
    • 제10권4호
    • /
    • pp.564-581
    • /
    • 1999
  • 본 논문에서는 CW 레이다기술, 자계기술, VHF/UHF 안테나를 사용한 적은 비용으로 작고 튼튼하며, 신속한 교체가 가능한 도로 관입형 차량검지기를 소개한다. 기존의 교통정보시스템의 알고리즘을 변화시키지 않고, 모든 환경조건에서 보다 정확히 동착하며 널리 사용되고 있는 루프감지기를 대체할 수 있도록 개발되 어졌다 검지된 차량정보는 물리적으로 강한 유전물질에 삽입된 소형의 헬리컬안테나에서 송출하여 5/8 파장 의 GP 안테나로 받아 제어부로 전송한다. 청명한 날씨에는 24 GHz로 동작하나 많은 비가 올 때는 자동스위치에 의해 자계검지부가 동작한다.

  • PDF

전차 탑재 L-밴드 펄수 도플러 레이더 설계 및 제작 (L-band Pulsed Doppler Radar Development for Main Battle Tank)

  • 박규철;하종수
    • 한국전자파학회논문지
    • /
    • 제20권6호
    • /
    • pp.580-588
    • /
    • 2009
  • 전차 탑재 레이더는 기상에 관계없이 전천후로 대전차 미사일을 탐지하는 능동 방호 장치의 필수적인 센서이다. 본 논문에서는 전차 탑재 레이더의 설계, 제작 및 시험 결과를 제시한다. 레이더 시스템은 안테나부, 송수신부, 신호처리부의 3개의 LRU로 구성되며, 개발 기술은 패치 안테나, SSPA 송신기, coherent I/Q detector, DSP기반 도플러 FFT 필터, 적응 CFAR, TWS 추적기 및 위협 판단을 포함한다. 개발된 레이더 시스템의 설계 성능은 고정 및 기동 시험을 통하여 확인한다.

소급성과 신뢰구간 개념을 적용한 개별차량단위 검지기 성능평가 (Individual Vehicle Level Detector Evaluation with Application of Traceability and Confidence Interval Concepts)

  • 장진환;최동원
    • 한국ITS학회 논문지
    • /
    • 제13권5호
    • /
    • pp.11-20
    • /
    • 2014
  • 실시간 교통정보는 현장에 설치된 차량검지기가 수집하는 교통량, 속도, 점유율 자료를 기반으로 생성된다. 따라서 검지기 성능을 일정수준으로 유지시키는 것이 중요하다. 이를 위해 ITS 관리기관에서는 주기적으로 검지기에 대한 성능평가를 수행한다. 일반적으로 검지기 성능평가는 기준값을 생성하는 장비(기준장비)와 평가대상 검지기가 수집하는 자료를 상호 비교함으로써 수행된다. 여기서 유의할 점은 기준장비 수집값 역시 평가대상 검지기 자료와 같이 오차 및 불확도를 포함하고 있다는 것이다. 또한 검지기 평가가 표본집단에 대해 이루어지기 때문에 이를 모집단의 결과로 표현하기 위해서는 신뢰구간 개념이 적용되어야 한다. 그러나 현재 국내 검지기 성능평가는 합리적인 방법론 부재로 인해 기준값 불확도 및 신뢰구간 개념을 적용하지 않고 있다. 따라서 본 연구에서는 기준값 불확도 및 신뢰구간 개념을 적용한 성능평가 방법론을 제시했고, 이를 루프, 영상, 레이더 검지기 성능평가에 적용했다. Over-count, Under-count 상쇄효과를 제거하기 위해 개별차량단위 자료를 평가하였고 그 결과, 제시된 방법론이 검지기 성능평가에 효과적으로 적용될 수 있음을 입증하였다.

헬기탑재 다중모드 레이다 시스템 모델 설계 (Multi-Mode Radar System Model Design for Helicopter)

  • 곽영길;배재훈
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
    • /
    • pp.208-212
    • /
    • 2003
  • An airborne radar is an essential aviation electronic system of the helicopter to perform various missions in all-weather environments. This paper presents the conceptual design results of the multi-mode pulsed Doppler radar system testbed model for helicopter. Due to the inherent flight nature of the hovering vehicle which is flying in low-altitude and low speed, as well as rapid maneuvering, the moving clutters from the platform should be suppressed by using a special MTD (Moving Target Detector) processing. For the multi-mode radar system model design, the flight parameters of the moving helicopter platform were assumed: altitude of 3 Km, average cruising velocity of 150knots. The multi-mode operation capability was applied such as short-range, medium-range, and long-range depending on the mission of the vehicle. The nominal detection ranges is 30 Km for the testbed experimental model, but can be expanded up to 75 Km for the long range weather mode. The detection probability of each mode is also compared in terms of the signal-to noise ratio of each mode, and the designed radar system specifications ate provided as a design results.

  • PDF

기존의 루프감지기와 호환성 있는 레이더 차량감지기 (Radar Vehicle Detector for the Raplacement of the Conventional Loop Detector)

  • 정기;정재권;김인석
    • 한국전자파학회논문지
    • /
    • 제11권8호
    • /
    • pp.1346-1354
    • /
    • 2000
  • 본 논문에서는 기존의 루프감지기와 호환성이 있는 레이더 기술을 이용한 차량감지기를 개발하였다. 24 ㎓의 FMCW 고도계와 도플러 속도계 기술을 이용하여 도로상의 차량 길이와 속도정보를 알아낼 수 있는 비매설형의 차량감지기이다. 신호처리에는 DAQ 보드를 사용하였고, 응용소프트웨어인 LabView로 프로그래밍 하였다. 기존의 루프 감지기와 연결된 교통정보 네트웍과의 호환성을 위해 RS-232C 표준인터페이스를 이용하여 VDS(Vehicle Detector System)로 차량데이터를 전송하였다. 속도와 차량길이 정보의 정확도에 있어서 기존 루프감지기보다 약 10% 정도 향상되었음이 측정되었다.

  • PDF