• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.4
• /
• pp.336-346
• /
• 2017

Applications of Sigma-Delta STAP, and a method of GMTI processing are presented for GMTI(Ground Moving Target Indication) mode of airborne radar with sigma, delta, and guard channels. We showed results of performance analyses of presented methods by clutter simulation with ICM(Internal Clutter Motion), signal processing simulation and MDV(Minimum Detectable Velocity). Presented methods for Sigma-Delta STAP and GMTI processing are easy to apply practically in GMTI mode of airborne radar without restriction by specific airborne radar system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.4 no.1
• /
• pp.21-29
• /
• 1998

Through the rapid development in personal computer technology, it has recently become possible to make a radar become possible to make a radar simulator based on the PC. Althougth such a technology has already been developed in the advanced countries like Japan, U.K., and U.S.A., our country has not been able to make such a simulator so far. In addition, revised STCW convention requires the maritime training institution to be equipped with the ARPA simulator satisfying the performance standard specified in the convention. In this thesis therefore, an attempt was made to developed the software of the ARPA radar simulation system using Visual Basic 4.0, with which we can finally make a Mockup style ARPA simulator satisfying the performance standard specified in the convention. In this thesis therefore, and attempt was made to developed the software of the ARPA radar simulation system using Visual Basic 4.0, with which we can finally make a Mockup style ARPA radar simulator. The system developed through the research has been found to run successfully on the desk top personal computer(586PC). A Mockup style ARPA radar simulator will be able to be made by simply installing this software on the PC which will be placed inside a ARPA radar Mockup, and this is one of the future research subjects.

• Journal of Navigation and Port Research
• /
• v.26 no.2
• /
• pp.199-207
• /
• 2002

Radar Cross Sections(RCS) for the radar targets are measured and their performance characteristics are analyzed through computer simulation. In addition, constructional features for the commercial radar reflectors are investigated. Then, the optimum design condition of a passive-type radar reflector was chosen. The results show that the octahedral-type radar reflector with 10$\lambda$ sized circular plates has best performance in X-band($\lambda$=3.2cm). However, to comply with newly adopted 2000 SOLAS regulations, larger sized circular plate is required to provide at both X-band and S-band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.5
• /
• pp.460-470
• /
• 2009

In this paper, we described the implementation of the X-Band continuous-wave doppler radar for muzzle velocity measurement. The radar is consisted of microwave transceiver, signal processor, power board, and the measuring program was developed for the operating and field test. The operating frequency of doppler radar is able to set ${\pm}3\;MHz$ with 5 channel from the center frequency, and the output power is 25 dBm. The minimum receiving power is -117 dBm. The radar would obtain the doppler frequency from the artillery, and calculate accurate velocity point and then estimate muzzle velocity. The performance test for this radar was done with 155 mm at barrel and tripod mounted, and also compared the performance with the reference radar. As a result, the performance of the our new radar is equal with the reference one.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.1
• /
• pp.70-78
• /
• 2019

In this paper, modeling of a high-resolution multi-function radar is proposed to simulate radar performance in a war game simulator, called AddSIM. To incorporate the multi-function radar model into the AddSIM, the modeling must comprise a component-based structure consisting of physics, logics, and information blocks. Therefore, we assign the RF hardware of a RADAR as the physic block, a controller as the logics block, and the RF specifications of the RADAR as the information block. Detailed modeling of the physics and logics blocks are addressed, and data structure is also presented on an engineering level. On a multi-target engaged scenario, the performance of the multi-function radar is numerically analyzed and its validation is examined.

• Journal of Navigation and Port Research
• /
• v.27 no.3
• /
• pp.267-272
• /
• 2003

This paper describes design method of Passive-type Radar Reflector (PRR) which is to provide the requirement of newly revised 2000 SOLAS regulations on the Radar Reflector. The main target of this work is to find the optimum shape of a radar target having large Radar Cross Section (RCS). Through the RCS analysis based on the theoretical approach, two kinds of PRR models, RRR-F model for use in fisheries and PRR-S model for use in small sized ship, are designed and discussed their RCS performance. RCS measurement tests for the various sized samples are carried out in an anechoic chamber. As evaluation results it was clearly shown that the conventional sphere-type shows optimum shape in case of PRR-S, while the cylinder-type which consists of large sized corner clusters or zig-zag flat plats gives best performance in case of PRR-F.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.6
• /
• pp.808-815
• /
• 2015

For performance improving of C-band radar altimeter used in a missile system, Ku-band radar altimeter is developed. To utilize the time delay devices which are used in testing C-band radar altimeter, we proposed C-band and Ku-band frequency conversion method and implemented it as a part of missile system test equipment. In this paper we present design contents, development results and test application results of radar altimeter test equipments.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.3
• /
• pp.40-49
• /
• 2008

In this paper, we have described a Simulated Radar Target Generation Equipment(SRTGE) for evaluating the performance of a developed radar system. In order to change a simulated target range(or time delay), the variable optical delay line structure is used in SRTGE, In addition, SRTGE is required to generate a target return signal which is composed of variable amplitude and Doppler velocity. The interference such as noise jamming and clutter is also produced from SRTGE for evaluating ECCM(Electronic-Counter-Counter Measure) capability of radar.

• International journal of advanced smart convergence
• /
• v.10 no.4
• /
• pp.263-272
• /
• 2021

At a time when securing driving safety is the most important in the development and commercialization of autonomous vehicles, AI and big data-based algorithms are being studied to enhance and optimize the recognition and detection performance of various static and dynamic vehicles. However, there are many research cases to recognize it as the same vehicle by utilizing the unique advantages of radar and cameras, but they do not use deep learning image processing technology or detect only short distances as the same target due to radar performance problems. Radars can recognize vehicles without errors in situations such as night and fog, but it is not accurate even if the type of object is determined through RCS values, so accurate classification of the object through images such as cameras is required. Therefore, we propose a fusion-based vehicle recognition method that configures data sets that can be collected by radar device and camera device, calculates errors in the data sets, and recognizes them as the same target.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2001.10a
• /
• pp.43-47
• /
• 2001

Computer simulation of abnormal atmospheric propagation condition and false echoes of marine radar have always been the difficulties in this field. The author of this paper has already done some constructive work.