• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.805-807
• /
• 2005

A basic assessment is presented of the technical, economic and strategic challenges expected for manufacturing displays in a roll-to-roll format. Two general pathways are considered; one that results in dramatic cost reductions but results in sacrificing product performance, and another which is an extension of the conventional FPD cost-reduction from increased substrate size. While Roll-to-Roll fabrication is fundamentally possible, feasibility experiments will be required to address the most significant technical challenge: achieving and managing acceptable yield. In all respects, the efforts to achieve RTR manufacturing will be assisted by overlapping interests in other application areas such as flex circuit, photovoltaics and large area lighting.

• Proceedings of the Optical Society of Korea Conference
• /
• 1989.02a
• /
• pp.185-192
• /
• 1989

It is shown that GaAs/GaAs stripe Roof-Top-Reflector LD is better than cleaved mirror LD by numerical analysis. And surface light emitting device is developed by LPE melt-back growth, which is of good controllability for OEIC. OEIC transmitter using RTR LD structured device and FET has been made and modulated, expected to show good modulation characteristics after solving process problem. Beam-Lead LD mounted on Si carrier has been made and shows low heat-resistance and so long life and good characteristics of LD.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6A
• /
• pp.506-514
• /
• 2009

To minimize energy consumption, most of MAC Protocols in WSNs exploit low duty cycling. Among those, RMAC [4] allows a node to transmit a data packet for multiple hops in a single duty cycle, which is made possible by exploiting a control frame named Pioneer (PION) in setting up the path. In this paper, we present a MAC Protocol called Hop Extended MAC (HE-MAC) that transmits the data packet for more multiple hops in a single duty cycle. It employs an EXP (Explorer) frame to set up the multiple hop transmission, which contains the information of the maximum hop that a packet can be transmitted. With the use of the information in EXP and an internal state of Ready to Receive (RTR), HEMAC extends the relay of the packet beyond the termination of the data period by two more hops compared to RMAC. Along with our proposed adaptive sleeping method, it also reduces power consumption and handles heavy traffic efficiently without experiencing packet inversion observed in RMAC. We analytically obtain the packet delivery latency in HE-MAC and evaluate the performance through ns-2 simulations. Compared to RMAC, HE-MAC achieves 14% less power consumption and 20% less packet delay on average for a random topology of 300 nodes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.9
• /
• pp.1138-1143
• /
• 2020

MRI scans in the abdominal area are difficult to achieve optimal images due to artificial respiration. Among 45 patients (male:female = 30:15) who underwent abdominal MRI examination, a metronome-based examination method was studied for patients whose breathing is difficult and difficult to examine. The images examined without using a metronome were divided into group A, and the images examined using a metronome were divided into group B. Image quality improvement (30%) and inspection time (approximately 50 seconds) were reduced in images using metronome. During abdominal magnetic resonance imaging (ABD MRI), the images examined using a metronome had differences in quality and examination time compared to the unused images. It is more effective to use a metronome brace that controls the patient's respiratory rate during abdominal magnetic resonance imaging under respiratory induction in patients with difficulty in respiratory-gated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.92-96
• /
• 2004

In this paper, polishing method using bonded magnetic abrasive particle has been applied to the micro mold polishing. Through process control using the Run-to-Run control, it tried to form the surface roughness In order to grasp the influence of the surface roughness which is reached by selection of control factor and the factor, a design of experiment was been processed. The study is processed with a purpose of to embody and to maintain the surface roughness of nano scale by the basis of an influence between a control factor and the factors which has been selected in this way. As a result, the result of the process control converged at a target value of surface roughness Ra 10nm and Rmax 50nm

• Journal of the Korea Safety Management & Science
• /
• v.12 no.1
• /
• pp.199-205
• /
• 2010

The research proposes the three-factor random measurement models for estimating the precision about operator, part, tool, and various measurement environments. The combined model with crossed and nested factors is developed to analyze the approximate F test by degrees of freedom given by Satterthwaite and point estimation of precisions from expected mean square. The model developed in this paper can be extended to the three useful models according to the type of nested designs. The study also provides the three-step procedures to evaluate the measurement precisions using three indexes such as SNR(Signal-To-Noise Ratio), R&R TR(Reproducibility&Repeatability-To-Total Precision Ratio), and PTR(Precision-To-Tolerance Ratio), The procedures include the identification of resolution, the improvement of R&R reduction, and the evaluation of precision effect.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.94.4-94
• /
• 2002

Traditional control systems that consist of sensors, actuators and a controller centralized and connected with point-to-point links, have become distributed because of their performance limits and maintenance problems. Sensors and actuators are changed to smart devices having a processor and these devices and controllers are connected with fieldbuses such as Profibus, FIP, CAN, LonWorks and so on. Because they are distributed, it takes any delay to transmit data from sensor to controller and data from controller to actuator according to network characteristic. Also, the execution times of tasks in a node are not regular and depend on the node characteristic and the number of tasks and so on...

• Journal of Digital Convergence
• /
• v.2 no.2
• /
• pp.9-28
• /
• 2004

The purpose of this study is explore the changes of environment in terms of diffusion of EC and to present effective marketing strategies for Electronic Commerce Activation. This paper focuses on the customer management, Real-Time Responding, and market strategies in Electronic Commerce. EC(Electronic Commerce) that out of the evolution of Internet technology gets a corporation changes to survive in 21st century. So the corporation must set the strategy to fit a Internet focused society. This paper is focusing the analysing the difference between the e-marketing and traditional marketing and proposing the new strategical marketing mix. On the Electronic Commerce, the 6Cs of marketing - Contents, Community, Commerce, Connection, Communication, Customizing - are being played out quite differently than they normally are off-line. In conclusion, the change in Electronic Commerce environment results in (1) redefinition of customer group, (2) different marketing strategies to fit in Electronic Commerce environment, and (3) changes in customer management, promotion strategy, advertizing appeal.

• 한국디지털정책학회:학술대회논문집
• /
• 2003.12a
• /
• pp.381-402
• /
• 2003

The Purpose of this study is explore the changes of environment in terms of diffusion of EC and to present effective marketing strategies for Electronic Commerce Activation. This paper focuses on the customer management, Real-Time Responding, and market strategies in Electronic Commerce. EC(Electronic Commerce) that out of the evolution of Internet technology gets a corporation changes to survive in 21st century. So the corporation must set the strategy to fit a Internet focused society. This paper is focusing the analysing the difference between the e-marketing and traditional marketing and proposing the new strategical marketing mix. On the Electronic Commerce, the 6Cs of marketing - Contents, Community, Commerce, Connection, Communication, Customizing - are being played out quite differently than they normally are offline. In conclusion, the change in Electronic Commerce environment results in (1) redefinition of customer group, (2) different marketing strategies to fit in Electronic Commerce environment, and (3) changes in customer management, promotion strategy, advertizing appeal.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.346-349
• /
• 2004

The teleoperation system applies all of the industrial fields due to the development of the network infrastructure. It is one of the indispensable elements for controlling the robot at a remote sight and monitoring the limit or unknown environment. The common teleoperation robot system is what has the visual module to supply the network system and realistic UI to the existed robot system. Therefore, remarked that the fusion between modules and transmission of visual data the remarked the important element to improve the robot application in the various environments. Delay of development time by robot platform and noneffective communication among developers are also problem to approach. In this paper we propose the independent teleoperation system. The main application language is JAVA in this system, which is applied JAVA API like JNI and JMF to construct the effective teleoperation system. The system has the both side communication system between sever and client as a basic structure. The visual data that is attached the robot at a remote sight is captured by JMF API and then is transmitted to the web browser called client by RTR protocol. JNI is used to connect between JAVA and the lower part application (sensor fusion, motion control.) of the robot programmed by various Native languages. The proposed system is the application that can perform the elements, for instance transmission of visual data, the fusion of various native application modules and the effective network communication, with any platform.