• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.726-731
• /
• 2002

The purpose of this paper is to analyze the path loss for the mobile cellular system. The maximum distance is 150 km and the area is about 6,000 $\textrm{km}^2$ and the field test was performed for the total 5 base stations. The path loss was calculated by Hata and Okumura models, respectively. As a result, it was shown that a proper model for the field test data is the middle one between the rural model and suburban/rural Hata model.

• Journal of Korea Spatial Information System Society
• /
• v.10 no.1
• /
• pp.51-63
• /
• 2008

Previous studies for routing In USN (Ubiquitous Sensor Networks) appear to be unreliable due to the dependence on non-spatial data and the lack of map overlay analysis. Multiple spatial parameters and radio propagation modeling techniques were integrated to derive RSSI (Received Signal Strength Indicator) value between route nodes and produce a highly reliable path map. It was possible to identify area-wide patterns of USN route subject to many different Influences (e.g. the specific effects of radio blocking factors such as the visible area, road area, cell duplicated area, and building density), which cannot be acquired by traditional non-spatial modeling. The quantitative evidence concerning the USN route for individual cell as well as entire study area would be utilized as major tools to visualize paths in real-time and to select alternative path when failure or audition of route node occurs.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.10
• /
• pp.899-905
• /
• 2016

Wireless access in vehicle environment (WAVE) communication is currently being researched as core wireless communication technologies for cooperative intelligent transport systems (C-ITS). WAVE consists of both vehicle to vehicle (V2V) communication, which refers to communication between vehicles, and vehicle to infrastructure (V2I) communication, which refers to the communication between vehicles and road-side stations. V2I has a longer communication range than V2V, and its communication range and reception rate are heavily influenced by various factors such as structures on the road, the density of vehicles, and topography. Therefore, domestic environments in which there are many non-lines of sight (NLOS), such as mountains and urban areas, require optimized communication channel modeling based on research of V2I propagation characteristics. In the present study, the received signal strength indicator (RSSI) was measured on both an experience road and a test road, and the large-scale characteristics of the WAVE communication were analyzed using the data collected to assess the propagation environment of the WAVE-based V2I that is actually implemented on highways. Based on the results of this analysis, this paper proposes a WAVE communication channel model for domestic public roads by deriving the parameters of a dual-slope logarithmic distance implementing a two-ray ground-reflection model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.6
• /
• pp.531-539
• /
• 2013

Fingerprinting technique uses the radio signal strength measured reference locations is typically used, although there are many Wi-Fi based location tracking techniques. However, it needs numerous reference locations for precision and accuracy. This paper the analyzes problems of previous techniques and proposes a fingerprinting system using reliability based on a signal strength map. The system collects the signal strength data from a number of reference locations designated by the developer. And then it generates path-loss models to one of the access points for each reference location. These models calculate the predicted signal strength and reliability for a lattice. To evaluate proposed method and system performance, We perform experiments in a $20m{\times}22m$ real indoor environment installed access points. According to the result, the proposed system reduced distance error than RADAR. Comparing the existing system, it reduced about 1.74m.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6B
• /
• pp.697-709
• /
• 2011

For improvement of wireless Internet service quality at vehicle's moving speed, it is advised to reduce the service disruption time by reducing the handover frequency on vehicle's moving path. Particularly, it is advantageous to avoid the handover to cell whose dwell time is short or can be ignored in terms of service continuity and average throughput. This paper proposes the handover scheme that is suitable for vehicle in order to improve the wireless Internet service quality. In the proposed scheme, the handover process continues to be learned before being modeled to Discrete-Time Markov Chain (DTMC). This modeling reduces the handover frequency by preventing the handover to cell that could provide service sufficiently to passenger even when vehicle passed through the cell but there was no need to perform handover. In order to verify the proposed scheme, we observed the average number of handovers, the average RSSI and the average throughput on various moving paths that vehicle moved in the given urban environment. The experiment results confirmed that the proposed scheme was able to provide the improved wireless Internet service to vehicle that moved to some degree of consistency.