• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.1
• /
• pp.30-36
• /
• 2009

Dedicated Short Range Communication (DSRC) systems in urban areas are used to collect traffic information from vehicles and to provide vehicles with information received from Roadside Equipment (RSE) having a range of 100 meters (m). However, it is not practical to use RSE with a range of 100 m for express highways. In this paper, we expand the standard cell coverage of RSE to 300 m, and adopt fixed relays to cover sites that cannot communicate with the RSE. We demonstrate that the system using the fixed relays is more economical than using only RSE.

• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1138-1143
• /
• 1997

This study was carried out to investigate the meat color and water holding capacity (WHC) characteristics of PSE, RSE (reddish-pink, soft, exudative), RFN (reddish-pink, firm, non-exudative) and DFD pork quality, also the relationship of lightness $(L^*-value)$ and WHC to drip loss were examined. When WHC in M. longissimus dorsi muscle by filter paper press method was measured at 45 min postmortem (45 min p.m.), DFD meat indicated the highest WHC, RSE and RFN pork were significantly different (p<0.05). WHC measured at 24 hr postmortem were not significantly different between RSE and RFN pork (p.0.05). Drip loss (%) were significantly different among the four quality group, but cooking loss (%) of PSE, RSE and RFN pork were not significantly different, except DFD. PSE pork indicated the lowest salt soluble protein solubility. The correlation between drip loss and $L^*-value$ was r=0.61, drip loss increased with increasing $L^*-value$. Also drip loss were moderately correlated with $WHC_{4.5\;min\;p.m.}$ (r=-0.47), with $WHC_{24\;hr\;p.m.}$ (r=-0.52). When drip loss was predictable from $L^*-value$ and WHC, $L^*-value$ was superior to evaluation by WHC.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.19-24
• /
• 2004

A number of creep data were collected and filed for type 316LN stainless steels through literature survey and experimental data produced in KAERI. Using these data, polynomial equations for predicting creep life were obtained for Larson Miller (L-M), Qrr-Sherby-Dorn (O-S-D) and Manson-Haferd (M-H) parametric methods. In order to find out the suitability for them, the relative standard error (RSE) and standard error of estimate (SEE) values were obtained by statistical process of creep data. The O-S-D parameter showed better fitting to creep-rupture data than the L-M or the M-H parameters, and the three parametric methods did not generate the large difference in the SEE and the RSE values.

• Nuclear Engineering and Technology
• /
• v.48 no.6
• /
• pp.1423-1432
• /
• 2016

The integrity of a reactor pressure vessel (RPV) related to pressurized thermal shocks (PTSs) has been extensively studied. This paper introduces an integrity assessment of an RPV subjected to a PTS transient based on the French codes. In the USA, the "screening criterion" for maximum allowable embrittlement of RPV material is developed based on the probabilistic fracture mechanics. However, in the French RCC-M and RSE-M codes, which are developed based on the deterministic fracture mechanics, there is no "screening criterion". In this paper, the methodology in the RCC-M and RSE-M codes, which are used for PTS analysis, are firstly discussed. The bases of the French codes are compared with ASME and FAVOR codes. A case study is also presented. The results show that the method in the RCC-M code that accounts for the influence of cladding on the stress intensity factor (SIF) may be nonconservative. The SIF almost doubles if the weld residual stress is considered. The approaches included in the codes differ in many aspects, which may result in significant differences in the assessment results. Therefore, homogenization of the codes in the long time operation of nuclear power plants is needed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.1
• /
• pp.77-85
• /
• 2000

To investigate the practical assessing method of pork quality, 302 carcasses were selected randomly to represent commercial conditions and were probed at 24 hr postmortem (PM) by Danish Meat Quality Marbling (MQM), Hennessy Grading Probe (HGP), Sensoptic Resistance Probe (SRP) and NWK pH-K21 meter (NpH). Also, filter paper wetness (FPW), lightness (L*), ultimate pH (pHu), subjective color (SC), firmness/wetness (SF) and marbling scores (SM) were recorded. Each carcass was categorized as either PSE (pale, soft and exudative), RSE (Reddish-pink, soft and exudative), RFN (reddish-pink, firm and non-exudative) or DFD (dark, firm and dry). When discriminant analysis was used to sort carcasses into four quality groups the highest proportion of correct classes was 65% by HGP, 60% by MQM, 52% by NpH and 32% by SRP. When independent variables were combined to sort carcasses into groups the success was only 67%. When RSE and RFN groups were merged so that there were only three groups (PSE, RSE+RFN, DFD) differentiating by color MQM was able to sort the same set of data into the new set of three groups with 80% accuracy. The proportions of correct classifications for HGP, NpH and SRP were 75%, 61% and 35% respectively. There was a decline in predication accuracy when only two groups, exudative (PSE and RES) and non exudative (RFN and DFD) were sorted. However, when two groups designated PSE and non-PSE (RSE, RFN and DFD) were sorted then the proportion of correct classification by MQM, HGP, SRP and NpH were 87%, 81%, 71% and 66% respectively. Combinations of variables only increased the prediction accuracy by 1 or 2% over prediction by MQM alone. When the data was sorted into three marbling groups based on SM this was not well predicted by any of the probe measurements. The best prediction accuracy was 72% by a combination of MQM and NpH.

• International Journal of Advanced Culture Technology
• /
• v.8 no.1
• /
• pp.226-235
• /
• 2020

In this paper, we present to evaluate physiological activity of Robinia pseudo-acacia leaf and its skin penetration using liposome and cell penetrating peptide. After extraction with Robinia pseudo-acacia leaf using the distilled water and supercritical, various physiological activities were examined. In antioxidants experiments, the total concentration of polyphenol compounds was determined to be 56.88 mg/g in hydrothermal extract, 45.07 mg/g in supercritical extract. The DPPH radical scavenging ability at 1,000 ㎍/mL was 33.97% in supercritical extract. The scavenging effect on SOD experiment at 500 ㎍/mL was 76.41% in supercritical extract. In the antimicrobial experiments, the hydrothermal extract had no effect, but supercritical extract represented maximum clear zone of 14.00 mm in Staphylococcus aureus strain. Liposome containing the RSE (Robinia pseudo-acacia leaf supercritical extract) reduced particle size and stabilized zeta potential. In the epidermal permeability experiment, it was confirmed that the permeation of liposome containing the RSE and cell penetrating peptides was remarkable.

• Journal of Forest and Environmental Science
• /
• v.32 no.3
• /
• pp.280-290
• /
• 2016

Stem diameter variability is an essential inventory result that provides useful information in forest management decisions. Little has been done to explore the modelling potentials of standard deviation (SDD) and coefficient of variation (CVD) of diameter at breast height (dbh). This study, therefore, was aimed at developing and testing models for predicting SDD and CVD in stands of Pinus caribaea Morelet (pine) in south west Nigeria. Sixty temporary sample plots of size $20m{\times}20m$, ranging between 15 and 37 years were sampled, covering the entire range of pine in south west Nigeria. The dbh (cm), total and merchantable heights (m), number of stems and age of trees were measured within each plot. Basal area ($m^2$), site index (m), relative spacing and percentile positions of dbh at $24^{th}$, $63^{rd}$, $76^{th}$ and $93^{rd}$ (i.e. $P_{24}$, $P_{63}$, $P_{76}$ and $P_{93}$) were computed from measured variables for each plot. Linear mixed model (LMM) was used to test the effects of locations (fixed) and plots (random). Six candidate models (3 for SDD and 3 for CVD), using three categories of explanatory variables (i.e. (i) only stand size measures, (ii) distribution measures, and (iii) combination of i and ii). The best model was chosen based on smaller relative standard error (RSE), prediction residual sum of squares (PRESS), corrected Akaike Information Criterion ($AIC_c$) and larger coefficient of determination ($R^2$). The results of the LMM indicated that location and plot effects were not significant. The CVD and SDD models having only measures of percentiles (i.e. $P_{24}$ and $P_{93}$) as predictors produced better predictions than others. However, CVD model produced the overall best predictions, because of the lower RSE and stability in measuring variability across different stand developments. The results demonstrate the potentials of CVD in modelling stem diameter variability in relationship with percentiles variables.

• Fibers and Polymers
• /
• v.6 no.1
• /
• pp.72-78
• /
• 2005

The impact of fiber friction, yarn twist, and splicing air pressure on mechanical and structural properties of spliced portion have been reported in the present paper. The mechanical properties include the tensile and bending related properties and, in the structural properties, the diameter and packing density of the splices are studied. A three variable three level facto­rial design approach proposed by Box and Behnken has been used to design the experiment. The results indicate that there is a strong correlation between retained spliced strength (RSS) and retained splice elongation (RSE) with all the experimental variables. It has been observed that RSS increases with the increase in splice air pressure and after certain level it drops, whereas it consistently increases with the increase in yarn twist. The RSE increases with the increase in both fiber friction and yarn twist. It has also been observed that the yarn twist and splicing air pressure have significant influence on splice diameter, percent increase in diameter and retained packing coefficient, but the fiber friction has negligible influence on these parame­ters. Yarn twist and splicing air pressure has a strong correlation with splice flexural rigidity, where as poor correlation with retained flexural rigidity.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.4
• /
• pp.415-422
• /
• 2019

Human epidermal stem cells(ESCs) residing in the basement membrane of the skin have an important role in maintenance of skin homeostasis of epidermal layer. Although, ESCs provide new cells to repair damaged tissue in response to tissue injury, subsets of stem cells remain in the quiescent state protected from differentiation and senescence for prolonged survivals. In this perspective, the stem cell niche, which is specific microenvironment composed of niche cells and an extracellular matrix(ECM), supplies the relevant signal to save stem cells from microenvironmental damages. The expression of stemness marker on the surface of ESCs contributes to the attachment on their ECM of the basement membrane, which lead to growth potential and apoptotic resistance against environmental stimuli. In this study, we observed that UV irradiation, a major factor of environmental stimuli, reduced the expression of α2, β1 and α6 integrin in ESCs. Rhus Semialata M extract(RSE) showed inhibitory effect on the UVB-induced reduction of integrin expression. Furthermore, RSE could upregulate the expression of Col-IV and Laminin, which contribute to the attachment of ESCs. These results indicated that RSE could be a potent ingredient for the protection of ESCs from UV irradiation by increasing the expression of integrin and substrate ECM components at their niche.

• Physical Therapy Rehabilitation Science
• /
• v.3 no.1
• /
• pp.27-32
• /
• 2014

Objective: The aim of this study was to compare the radial bone strength, sitting balance ability and global self-esteem of wheelchair martial arts practitioners and healthy control participants. Design: Cross-sectional study. Methods: Nine wheelchair martial art practitioners with physical disabilities and 28 able-bodied healthy individuals participated in the study. The bone strength of the distal radius was assessed using the Sunlight Mini-Omni Ultrasound Bone Sonometer; sitting balance was quantified using the modified functional reach test (with reference to a scale marked on the wall); and the self-administered Rosenberg self-esteem (RSE) scale was used to measure the global self-esteem of the participants. The velocity of the ultrasound wave (speed of sound, m/s) traveling through the outer surface of the radial bone was measured and was then converted into a T-score and a Z-score. These ultrasound T-score and Z-score that represent bone strength; the maximum forward reaching distance in sitting (cm) that represents sitting balance; and the RSE total self-esteem score that indicates global self-esteem were used for analysis. Results: The results revealed that there were no statistically significant between-group differences for radial bone-strength, maximum forward reaching distance, or self-esteem outcomes. Conclusions: The wheelchair martial arts practitioners had similar radial bone strength, sitting balance performance and self-esteem to able-bodied healthy persons. Our results imply that wheelchair martial arts might improve bone strength, postural control and self-esteem in adult wheelchair users. This new sport-wheelchair martial arts-might be an exercise option for people with physical disabilities.