• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.251-255
• /
• 2012

최근 치수계획 분야에서 원격탐사(RS) 및 지형정보시스템(GIS)의 비중이 높아짐에 따라 이를 이용하여 유역 치수계획에서의 홍수범람분석 향상을 위한 활용이 증가하고 있다. 홍수범람분석을 할 때 대상유역의 지형학적 특성을 제대로 판단하고 범람 가능지역에 대한 사전 추출 및 홍수에 의한 피해 상황을 미연에 방지하는 연구가 필요하다. 그러나 수리해석에서 사용하는 대표적인 지형자료인 수치표고모델(Digital Elevation Model ; DEM) 제작시 제외지 수면부에 대한 지형정보취득 불가로 인해 자세한 표고자료와 제방 및 제외지의 형태를 구분할 수 있는 정보가 없으므로 홍수범람분석에는 한계가 있으며, 이에 따라 하천지형 보완에 대한 검토가 이루어져야 할 것이다. 본 연구에서는 하천지형 보완에 따른 홍수범람 비교연구를 위하여 섬강 유역의 DEM 및 하천측량자료를 이용하여 수행하였다. 국토지리정보원의 DEM과 하천지형 보완을 수행한 DEM(하천측량자료)을 이용하여 대상유역의 지형구축을 하였으며, HEC-GeoRAS/HEC-RAS 및 CCHE-2D를 이용하여 RS/GIS 프로그램과 연계한 홍수범람분석을 수행하였다. 또한 이상홍수시에 홍수범람 양상을 산출하고 하천지형 보완 유무에 따른 비교를 함으로서 RS/GIS를 이용한 수리분석시 지형자료의 활용성에 대해 알아보고자 한다.

• Journal of Korean Neurosurgical Society
• /
• v.67 no.2
• /
• pp.166-176
• /
• 2024

Objective : Three-dimensional (3D) printing in vascular surgery is trending and is useful for the visualisation of intracranial aneurysms for both surgeons and trainees. The 3D models give the surgeon time to practice before hand and plan the surgery accordingly. The aim of this study was to examine the effect of preoperative planning with 3D printing models of aneurysms in terms of surgical time and patient outcomes. Methods : Forty patients were prospectively enrolled in this study and divided into two groups : groups I and II. In group I, only the angiograms were studied before surgery. Solid 3D modelling was performed only for group II before the operation and was studied accordingly. All surgeries were performed by the same senior vascular neurosurgeon. Demographic data, surgical data, both preoperative and postoperative modified Rankin scale (mRS) scores, and Glasgow outcome scores (GOS) were evaluated. Results : The average time of surgery was shorter in group II, and the difference was statistically significant between the two groups (p<0.001). However, no major differences were found for the GOS, hospitalisation time, or mRS. Conclusion : This study is the first prospective study of the utility of 3D aneurysm models. We show that 3D models are useful in surgery preparation. In the near future, these models will be used widely to educate trainees and pre-plan surgical options for senior surgeons.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.6
• /
• pp.252-256
• /
• 2015

Nitrogen oxides ($NO_X$) was emitted from flue gas of stationary sources and exhaust gas of mobile sources, can leads to various environments problems. Selective Catalysts Reduction (SCR) is the most effective $NO_X$ removal system. Commercial $V_2O_5-WO_3/TiO_2$ catalysts, usually containing $V_2O_5$ 0.5~3 wt%, $WO_3$ 5~10 wt%, and $V_2O_5$ is active in the reduction of $NO_X$ but also in the desired oxidation of $SO_2$ to $SO_3$. To reduce the amount of vanadium, using graphene matrix supported vanadium to synthesize nanocomposite. Then, we fabricated to 1 inch honeycomb type of SCR catalysts adding graphene-vanadium nanocomposite. The chemical-physical characteristics and the catalytic activity were performed by XRD, XRF, BET and Micro-Reactor (MR). As a result, the De-NOX performance was showed, similar to the commercial catalyst activity as 77.8 % and using nanocomposite catalyst as 77.1 % at $350^{\circ}C$.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.3
• /
• pp.114-123
• /
• 2020

PURPOSE. The aim of this study was to evaluate the corrosion resistance of the specimens produced by five different commercial metal laser sintering (MLS) systems with their recommended Co-Cr alloy powders. MATERIALS AND METHODS. The MLS machines and the alloy powders used were, ProX 100-ST2724G (St-Pro), Mysint 100-EOS SP2 (SP2-Mys), EOSINT 270-EOS SP2 (SP2-EOS), SLM 100-Starbond CoS (SB-SLM), and MLab Cusing-Remanium^® Star (RS-MLab), respectively. Eight specimens from each group were prepared. Open circuit potential (E_ocp) and electrochemical impedance spectroscopy (EIS) measurements of polished surfaces of the specimens were conducted in a three-electrode cell using a potentiostat-galvanostat in Fusayama-Meyer artificial saliva (AS). Specimens from each group were immersed in AS and de-ionized water for seven days. E_ocp, charge transfer resistance (R_ct) values, and released ions (㎍/㎠ × 7d) in different solutions were determined. The specimen surfaces were observed with SEM/EDS. Results were analyzed statistically. RESULTS. E_ocp values have shifted to potentials that are more positive over time. Steady-state E_ocp values were from high to low as follows, SB-SLM, SP2-Mys, SP2-EOS, RS-MLab, and ST-Pro, respectively. After 60 mins, RS-MLab specimens had the highest R_ct value, followed by SP2-Mys, SB-SLM, SP2-EOS, and ST-Pro. In all groups, ion release was higher in AS than that in de-ionized water. CONCLUSION. There were small differences among the corrosion resistances of the Co-Cr alloy specimens produced with MLS systems; meanwhile, the corrosion resistances were quite high for all specimens.

• The Korean Journal of Physiology and Pharmacology
• /
• v.25 no.6
• /
• pp.525-532
• /
• 2021

We have investigated the relative roles of α₁-adrenoceptors and purinoceptors in contractions to low and high frequency stimulation of the mouse vas deferens, in terms of the time course of responses. In separate experiments, isometric contractile responses were obtained to 10 pulses at 1 Hz and 40 pulses at 10 Hz. Responses to 1 Hz stimulation consisted of a series of discrete peaks. The α_1A-adrenoceptor antagonist RS100329 (10^-9M-10^-7M) significantly reduced the response to the first pulse, the α_1D-adrenoceptor antagonist BMY7378 (10^-7M-10^-6M) significantly reduced the response to the first two pulses, and the non-selective α₁-adrenoceptor antagonist prazosin (10^-8M) reduced the response to the first 4 pulses at 1 Hz. Responses to 10 Hz stimulation consisted of an early peak response and a maintained plateau response. RS100329 significantly reduced the peak response but did not significantly affect the plateau response. Prazosin, significantly reduced both the peak and plateau responses. The α_1A-adrenoceptor antagonist RS17053 in high concentrations reduced mainly the plateau response leaving a clear early peak response. The plateau response of contraction was almost abolished by the purinoceptor antagonist suramin. These results suggest that there is a relatively minor early α_1D-adrenoceptor and a larger early α_1A-adrenoceptor component to stimulationevoked contractions of mouse vas deferens, but the major α₁-adrenoceptor component is revealed by prazosin to be α_1B-adrenoceptor mediated. α_1B-Adrenoceptor activation probably facilitates contractions mediated by other α₁-adrenoceptors and by purinoceptors. These results suggest that combined non-selective α₁-adrenoceptor blockade, particularly α_1B-adrenoceptor blockade, in addition to P2X1-purinoceptor blockade is useful in reducing male fertility.

• The KIPS Transactions:PartD
• /
• v.10D no.6
• /
• pp.1025-1032
• /
• 2003

Percentiles are convenient measures of the entire range of values of simulation outputs. However, unlike means and standard deviations, the observations have to be stored since calculation of percentiles requires several passes through the data. Thus, percentile (PE) requires a large amount of computer storage and computation time. The best possible computation time to sort n observations is (O($nlog_{2}n$)), and memory proportional to n is required to store sorted values in order to find a given order statistic. Several approaches for extimating percentiles in RS(regenerative simulation) and non-RS, which can avoid difficulties of PE, have been proposed in [11, 12, 21]. In this paper, we implemented these three approaches known as : leanear PE, batching PE, spectral $P^2$ PE in the context of sequential steady-state simulation. Numerical results of coverage analysis of these PE approachs are present.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.1
• /
• pp.8-13
• /
• 2023

Biodegradation of antibiotics in soil can be affected by various environmental factors. This study was set to investigate the effect of environmental conditions such as soil pH and temperature on the degradation of oxolinic acid (OA), one of the agricultural antibiotics used in South Korea, in soil. Rice paddy soil (RS) and field soil (FS) were contaminated with OA and the soil pH was adjusted to 5.7±0.2, 6.8±0.2, and 7.6±0.1. The soil samples were kept at different temperatures (2.3±0.2, 23.0±0.6, 30.5± 0.3℃) for 30 d. The changes in the OA concentrations were determined at selected times. With the RS and FS, the OA removal was not affected by the soil pH used in this study; however, at pH 7.6, the OA removal in the RS was greater than that in the FS, which can be attributed to the different soil properties. The OA removal was similar at 23.0 and 30.5℃ in both soils, but was lower at 2.3℃. The information on the effect of different environmental conditions on the degradation of antibiotics in soil is very limited. Therefore, further studies are needed to better manage the residual antibiotics in the agricultural environment.

• Archives of Pharmacal Research
• /
• v.21 no.2
• /
• pp.217-222
• /
• 1998

A stereospecific HPLC method has been developed for the resolution of the enantiomers of salbutamol in human urine. After solid-phase extraction and derivatization with 2,3,4,6-tetra-O-acetyl-$\beta$-D-glucopyranosyl isothiocyanate, the diastereomeric derivatives were resolved (Rs=1.83) on $5{\mu}m$ octadecylsilan column using 35% acetonitrile in 0.05M ammonium acetate buffer (pH=6) as a mobile phase with electrochemical detection. The diastereomeric derivatives were formed within 30 min. The detection limit of each enantiomer was 20 ng/ml (S/N=3).

• Journal of Animal Science and Technology
• /
• v.54 no.2
• /
• pp.111-124
• /
• 2012

Feeding trial was conducted with 80 Hanwoo steers (7.5 months of age, 204.4 kg body weight) for 680 days from growing period to late fattening period to examine the feeding value of whole crop barley silage TMR (BS-TMR) and whole crop rye silage TMR (RS-TMR) on body gain, feed cost, slaughter characteristics and quality characteristics of $longissimus$ $dorsi$ muscle. Dietary treatments were conventional separate feeding of concentrate and rice straw (control), feeding BS TMR up to middle fattening period and same diet as for control during late fattening period (BS-TMR I), feeding BS-TMR for whole experimental period (BS-TMR II), feeding RS TMR up to middle fattening period and same diet as for control during late fattening period (RS-TMR I) and RS TMR for whole experimental period (RS-TMR II). Sixteen castrated calves were assigned to each treatment (4 pens, 4 heads per pen). Pens in each treatment were randomly distributed. Feeding both BS silage TMR and RS silage TMR slightly increased body gain of Hanwoo steers at the stages of growing and early fattening, and increased (P<0.0001) at middle fattening compared to feeding control diet while control diet tended to increase body gain at late fattening stage compared to feeding BS-TMR I, BS-TMR II and RS-TMR I diets. Total body gain was slightly increased in Hanwoo steers fed both I and II for BS and RS TMR compared to that in control diet. Feed cost per kg gain per head was relatively low in the Hanwoo steers fed silage TMRs to that fed control diet. Carcass weight, back fat thickness and $longissimus$ $dorsi$ area of Hanwoo steers tended to increase but lowered (P<0.047) yield index by feeding silage TMRs. Feeding BS TMR slightly decreased marbling score but no difference was found in the number of head over grade 1 between diets. Control diet tended to improve yield grade compared to silage TMRs. Chemical composition, water holding capacity, drip loss, cooking loss and pH, color and fatty acid composition of $longissimus$ $dorsi$ were not affected by experimental diets and feeding duration of silage TMRs. Shear force, however, was increased (P<0.046) by silage TMRs without difference between them compared to control diet. Based on the results of the current study, BS TMR and RS TMR could improve body gain and reduce feed cost without deteriorating meat quality compared to separate feeding of concentrate and rice straw. Overall feeding value was similar between BS TMR and RS TMR.

• Journal of Biosystems Engineering
• /
• v.26 no.2
• /
• pp.163-168
• /
• 2001

A manipulator for test-cup attachment modules, which was a part of a robot milking system, was developed to reduce cost and labor for cow milking processing. A Cartesian coordinate manipulator was designed for the milking process, because it was quite flexible and can be constructed more economically than any other configuration. The manipulator was made use of DC motors, screws for power transmission, a RS422 interface system for the transmission of coordinate values and a one-chip microprocessor, 89C52. Performance tests of the manipulator were conducted to measure experimentally the precision of all axes. Some of the results are as follows. 1. The Cartesian coordinate manipulator was designed and built. Dimension of the three perpendicular axes (X, Y, and Z) and one arm’s axis(W) to pick up and transfer the modules were 700㎜$\times$450㎜$\times$550㎜$\times$650㎜. The arm’s axis moved the teat-cup attachment module, which attached four teat-cup to four teats, detached four teat-cup from four teats, was designed and manufactured by using CAD, CAM and CNC. 3. After 10 replications of exercising the manipulator, mean precision values(positioning error) of X, Y, Z axes wee 0.48㎜, 0.20㎜, 0.19㎜, respectively. Therefore, we conclude the axes to have a precision better than 0.5㎜, had no problem to operate correctly the milking manipulator.