• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.842-845
• /
• 2008

This paper propose a dormitory management system based on 13.56MHz RFID system. The proposed dormitory management system consists of three parts, the RFID hardware system the middleware, and the application. RFID hardware system uses 13.56MHz frequency which is suitable for a close range. The middleware is implemented to accept the RFID hardware system values using RS-232c communication method and forward the values to the application. The application is designed to make the DB using the forwarded values, and works based on the DB. The efficacy of the proposed dormitory management system is verified by means of experiments. In the experiments, we set up the system to the dormitory of Daeduk College to show the improvement results of proposed system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.2
• /
• pp.247-253
• /
• 2008

In this paper, we describes the design and implementation of real-time management system for efficient operation via monitoring and control of MCC(Motor Control Center). The real-tine management system can be divided hardware(MCC panel) and software(management program). First, hardware is divided into load attaching motor and MCC components for working together control and data network. Second, software(management system) are consisted of communication interface, environment setting, data processing modules. The produced and implemented reduction model of MCC panel is pretested using m-PRO, iM-PRO devices, and HyperTerminal. For field test, MCC panel is tested by RS-232C/485, communication procedure in management system is certified by transmitting and receiving message using control command. By the experimental results, the implemented real-time management system can be used to operate MCC system.

• The Journal of the Korea Contents Association
• /
• v.4 no.1
• /
• pp.1-7
• /
• 2004

In addition to wired communication technology, wireless communication technology has been driving communication revolution nowadays. Bluetooth technology carries out data/voice communication making pico-net and the various application services are supported by access network connected to public network. This paper presents educational software development of bluetooth protocol stack including HCI, L2CAP, RFCOMM, SDP and profiles including GAP, SPP, GEOP, FTP. This software which supports programming environment of these protocol monitoring and emulation is implemented basically step by step for education based on H connected to the bluetooth device through RS-232-C, UART or USB cable. Application program coded by Visual C is operated over the firmware loaded on the bluetooth device connected to the PC. Additionally ftp and chatting function are developed to enhance educational efficiency.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 1996.11a
• /
• pp.49-52
• /
• 1996

재해발생 형태가 시간과 장소에 따라 미료하게 달라지고 사고 발생시 재산피해는 극대화될 가능성이 높아짐에 따라 위험요소 감지를 위한 중앙집중적감시의 방재 시스템을 선호하고 있다. 그러나 기존의 종합 방재 시스템에서 사용하고 있는 RS232C나 RS422로는 원거리에서의 제어 및 감시가 곤란하다. 본 논문에서는 인터네트상의 WWW프로토콜인 HTTP를 사용하여 원거리에서 감시 및 제어할 수 있는 자동화 방재시스템의 통신환경을 구현하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.463-470
• /
• 1995

설계, 가공, 조립, 검사기술로 대표되는 생산시스템의 근간 기술은 공작기계에 의한 부품가공 소위, 기계 가공 기술이다. 가공에 필요한 NC 프로그램의 효율적인 관리를 위해 이용되던 종래의 DNC(Direct Numerical Control) 는 가공 Cell 의 효율을 높이기 위해, CNC 가공기 및 주변기기에 대한 실시간 감시/제어기능을 가진 분산제어시스템( DNC(Distributed Numerical Control)으로 발전하고있다. 본 연구에서는 이기종 CNC로 이루어진 가공 Cell에 적합 하고, 경제성, 범용성 및 확장성을 고려하여 RS485 Network 및 RS232C를 이용하여각 CNC 공작기계 및 주변기기와 연결 해서 실시간(Real Time) 동시작업(Multi Tasking) 가능한 DNC 시스템을 개발하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.2
• /
• pp.191-198
• /
• 2014

As an NMEA 2000 is a standard for communicate to other electronic equipment, it implemented a Universal gateway based on this ship's network. To implement a NMEA 2000 based Universal gateway, it is porting a NMEA 2000 stack source and CAN device driver source to board, and then it connected a board that equip with various communication protocol(CAN, RS232, USB, Ethernet port). To verify converted ship's data to a developed gateway, it connected pc based simulater program and monitoring program to a developed board. so we can see a ship's data through NEMA 2000 network. We verified a gateway performance and analyzed a generated ship's data from simulator program through a monitoring program that was connected a gateway and NMEA 2000 network. so it was designed, implemented to allow monitoring through utilizing a communication method that user wants.

• Journal of Digital Convergence
• /
• v.12 no.12
• /
• pp.257-264
• /
• 2014

Through MCU model, Radio Frequency communication is completed using universal asynchronous receiver and transmitter. The communicatin with PC and MCU is completed using RS-232 cable. At first interconnected communication with PC and MCU is necessary for RF communication because tha UART is based technique for RF communication. Program imbeded in microcontroller unit is ran during RF signal is transmitted to other RF module. Data connected with PC and MCU is transmitted between PC and MCU during PC and MCU is connected.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.1
• /
• pp.21-26
• /
• 2006

In this paper, to improve the variable and remote controllable digital power-supply design. It is able to RS-232 communication for remote control. And it can also observe the correct power. Finally, it intend to high ratio design that compare input power with output power. There are especially useful solution in korea to be under the unstable voltage environment.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.2
• /
• pp.347-353
• /
• 2012

In this paper, authors will develop the quick and precise remote controller of automatic fire detection equipment (P-type one-class receiver) based on information communication technology (IT). The remote controller detects the fire and disaster in the building automatically and quickly and then activates the facilities to extinguish the fire and disaster, monitoring such situation in a real time through wire-wireless communication network. The proposed remote controller is applied a programmable logic device (PLD) micom. of one-chip type which is small size and lightweight and also has highly sensitive-precise reliabilities. The one-chip type PLD micom. analyzes digital signals from sensors, then activates fire extinguishing facilities for alarm and rapid suppression in a case of fire and disaster. The detected data is also transferred to a remote situation room through wire-wireless network of RS232c and bluetooth communication, and then the situation room sends an emergency alarm signal. The automatic fire detection equipment (AFDE) based on IT will minimize the life and wealth loss while prevents fire and disaster.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.101-101
• /
• 2012

본 논문은 현재 제품화 단계로 진행 중인 터보 분자펌프(turbo-molecular pump, TMP)와 극저온 펌프(cryopump)의 고장 방지 및 예지 보수를 위한 상태 진단 시스템에 대하여 소개를 한다. 본 상태 진단 시스템은 고진공 펌프들의 다중 상태변수 즉 흡/배기부의 진공 압력, 부위별 온도, 소비 전류(혹은 전력), 그리고 부위별 진동 신호들을 실시간으로 측정하는 상태변수 수집장치, 수집된 시계열 상태변수들이 저장된 database, 그리고 저장된 상태변수를 이용한 고진공펌프의 상태진단 프로그램으로 구성되어 있다. 금번 연구에서 구축한 상태변수 체계의 특징 중 하나는 진동신호를 상태변수로 측정하여 이를 상태진단에 활용하는 점이 기존의 접근방법과 상이한 점이다. 실시간 신호 수집장치는 NI사 PXI 시스템 기반의 16채널 24-bit 동시 전압신호 측정 모듈, 8부위의 온도 측정장치(Lakeshore 218S, RS-232C 통신), 그리고 펌프의 소비전류/전력 측정장치(Hioki 3169, RS-232C), 그리고 고진공 펌프의 흡입 및 배기구의 진공도 측정장치로 구성하였다. 신호 수집용 프로그램은 NI사 Labview를 이용하여 작성하였다. 본 장치는 Nano-Fab 센터의 협조 하에 turbo-molecular 펌프와 cryopump측정 단에 각각 1대를 설치 완료하였으며 현재까지 운용 중이다. PC에 저장된 시계열 상태변수 database는 기 개발된 적응형 인자모델을 이용한 매개변수로 변환되며, 상태진단은 변환된 매개변수를 이용하여 수행할 예정이다.