• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2473-2475
• /
• 1998

In this paper, we implemented RS232C serial communication by the 2 wires(Data,GND), and multiple access, by the applying Collision Sensing Multiple Access(CSMA) Protocol. Multiple access is implemented by assigning a unique ID to each controller. The multiple access control operation starts by sending a command packet from a host to another host and the command packet is composed of ID bytes of source and target host computer, data bytes and the check sum, byte. In host computer, after sending command packet, the collision from loop back data. If collision is detected, it means a command packet was collided with another command packet for another host. The packet communication of the controller enables the multiple acces of the controller through the common serial data link. The application of this serial communication through CSMA protocol and the usage of two wires, have an effect on saving the wires and convenient of layout work.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.2 s.257
• /
• pp.205-210
• /
• 2007

SiC/SiC composites and monolithic SiC materials have been fabricated by the melt infiltration process, through the creation of crystallized SiC phase by the chemical reaction of C and Si. The reinforcing material used in this system was a braided Hi-Nicalon SiC fiber with double interphases of BN and SiC. The microstructures and the mechanical properties of RS-SiC based materials were investigated through means of SEM, TEM, EDS and three point bending test. The matrix morphology of RS-SiS/SiC composites was greatly composed of the SiC phases that the chemical composition of Si and C is different. The TEM analysis showed that the crystallized SiC phases were finely distributed in the matrix region of RS-SiC/SiC composites. RS-SiC/SiC composites also represented a good flexural strength and a high density, accompanying a pseudo failure behavior.

• Journal of Korea Multimedia Society
• /
• v.12 no.3
• /
• pp.345-353
• /
• 2009

It is for sure that a stable game managing system is absolutely needed to accept simultaneous interfacing of many users for P2P on-line game system. The proposed P2P on-line game system in this paper is able to get smart and stable game managing taking care of extensive players through reorganizing numerous RS(Region Server) and mutual communications among RS's which can be avoid congestion on one region. Moreover, it is possible to synchronize for game nodes in time stamp utilizing Global Zone Buffer of Monitoring Server which leads to breakup loads. The system manages middleware layers in the so-called sub area, and it is able to execute no matter how big the game sizes are. That means, in some ways, we got everything we try to ensure such as the problems of high cost server and stabilization of message transmission. This paper welcomes to prove efficiency of the suggested system through the simulation.

• Journal of KIISE:Databases
• /
• v.31 no.6
• /
• pp.641-649
• /
• 2004

The relationship between chemical structures and biological activities is researched briskly in the area of 'Medicinal Chemistry' At the base of these structure-based drug design tries, medicinal chemists search the existing drugs of similar chemical structure to target drug for the development of a new drug. Therefore, it is such necessary that an automatic system selects drug files that have a set of chemical moieties matching a user-defined query moiety. Substructure searching is the process of identifying a set of chemical moieties that match a specific query moiety. Testing for substructure searching was developed in the late 1950s. In graph theoretical terms, this problem corresponds to determining which graphs in a set are subgraph isomorphic to a specified query moiety. Testing for subgraph isomorphism has been proved, in the general case, to be an NP- complete problem. For the purpose of overcoming this difficulty, there were computational approaches. On the 1990s, a US patent has been granted on an atom-centered indexing scheme, used by the RS3 system; this has the virtue that the indexes generated can be searched by direct text comparison. This system is commercially used(http://www.acelrys.com/rs3). We define the RS3 system's drawback and present a new indexing scheme. The RS3 system treats substructure searching with substring matching by means of expressing chemical structure aspredefined strings. However, it has insufficient 'rerall' and 'precision‘ because it is impossible to index structures uniquely for same atom and same bond. To resolve this problem, we make the minimum-cost- spanning tree for one centered atom and describe a structure with paths per levels. Expressing 2D chemical structure into 1D a string has limit. Therefore, we break 2D chemical structure into 1D structure fragments. We present in this paper a new index technique to improve recall and precision surprisingly.

• Korean Journal of Materials Research
• /
• v.11 no.6
• /
• pp.492-497
• /
• 2001

We report the characteristics and the dependence of sputter-deposited Ta films on the process parameters. The properties of as-deposited Ta films such as deposition rate, resistivity, Rs uniformity, reflectivity, and stress were investigated and analyzed as a function of process parameter using a statistical experimental method. The functional relationships between the independent and dependent variables were predicted by surface response. The optimal deposition condition of DC magnetron sputtered Ta films was obtained at the chamber pressure of 2 mTorr, power density of 8 W/$\textrm{cm}^2$, and substrate temperature of 2$0^{\circ}C$ by means of resistivity and Rs uniformity. The fitness value for quadratic model as evaluated by the R- square was 0.85~ 0.9 without pooling. The as-deposited Ta films exhibited the resistivity of ~180$\mu$$\Omega$cm with Rs uniformity of ~2%. The transmission electron microscopy and x-ray diffractometry identified that the phase of as-deposited film was $\beta$-Ta having the grain size of 100~200.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.2111-2118
• /
• 2008

This parer propose a U-dormitory management system based on 13.56MHz RFID system. The proposed U-dormitory management system consists of three parts, the RFID hardware system, the middleware, and the application. RFID hardware system uses 13.56MHz frequency which is suitable for a close range. The middleware is implemented to accept the RFID hardware system values using RS-232c communication method and forward the values to the application. The application is designed to make the DB using the forwarded Haloes, and works based on the DB. The efficacy of the Proposed U-dormitory management system is verified by means of experiments. In the experiments, we set up the system to the dormitory of Daeduk College to show the improvement results of proposed system.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1099-1100
• /
• 2006

The running of the electric train are done by powering, breaking and coasting. Powering to start and accelerate the rolling stock means driving the three-phase electric induction motors controlled by VVVF inverters which are connected to overhead power line directly(DC) or indirectly(AC, DC/AC). Breaking is achieved by blending control which is the proportional combination between regenerative breaking of VVVF inverter and air pressure control of breaking operating unit(BOU). Therefore, Data obtained during two operation are very important items to evaluate the running performance of RS. This paper has investigated in real time data acquired from VVVF inverter and measured by pressure sensor directly connected to air breaking line(motor car and trailer car). By analyzing data in the region of time and frequency, fundamental methods for eavaluating the running performance of RS quantitatively and objectively have been suggested.

• Journal of the Korea Society for Simulation
• /
• v.13 no.4
• /
• pp.17-29
• /
• 2004

The focus of this study is to represent a methodology of analysis for integrated logistic system by means of the Evolution Strategies and Data Envelopment Analysis(DEA). The integrated logistic system is composed of AS/RS (Automated Storages and Retrieval System), AGVs(Automated Guided Vehicle System) and Conveyor System. We design the simulation alternatives with choosing the qualitative critical factors for the each subsystem. Evolution Strategies is used to optimize the quantitative critical factors and responses of each alternative. DEA is applied to measure the efficiency of the alternatives in order to select the optimal operation efficiency scheme. The method of analysis which combines Evolution Strategies with DEA can be used to analyze the qualitative and quantitative critical factors in the integrated logistic systems.

• Journal of Ceramic Processing Research
• /
• v.13 no.spc2
• /
• pp.163-165
• /
• 2012

Impedance spectroscopy informs electrical properties of materials as accumulated charges, contact status between electrode and organic materials. We carried out impedance spectroscopy of organic light-emitting diodes as ITO/Alq3(60 nm)/Al on temperatures from 10 K to 300 K. The result described Z'-Z" plot, cole-cole plot and dielectric relaxation time τ. Z'-Z" plot means that real and imaginary part of materials in organic and electrode by frequencies and temperature. Z' as real part of impedance by applied frequency depending on temperature shows the plateau in low frequency region as Rs+ Rp and over 100 kHz in high frequency region as Rs. Cole-cole plot shows resistance of materials in equivalent circuit of the device by temperatures. And equivalent circuit and dielectric relaxation could be accomplished by using the complex impedance analysis.

• Journal of Korea Multimedia Society
• /
• v.12 no.5
• /
• pp.664-676
• /
• 2009

As data broadcasting has become available, diverse contents can now be provided through digital TV, IPTV and DMB; yet it is true in the current situation that killer contents are insufficient that can satisfy users. On the contrary, in case of the web, with the advent of web 2.0 aiming at user-centered services, the contents market has grown greatly. The ideas and technologies of Web 2.0, if gratified into data broadcasting, are expected to make a contribution to the vitalization of contents. This paper proposes a method of using RSS, as a concrete example of applying web 2.0 to data broadcasting. Accordingly, we have developed a system for producing data services for the ground wave DMB data broadcasting, by using RSS at the stage of authoring news and the like, for which provision of the latest information is important. And for IPTV, we have developed a data broadcasting application so that users can select the RSS they want, as well as a creation system for using RSS at the authoring stage. It is anticipated that the application of RSS by means of the system will simplify the authoring process, making easy the provision of the latest information through the web, and thereby making possible the provision of diverse services to users.