• Journal of Korea Water Resources Association
• /
• v.42 no.2
• /
• pp.171-176
• /
• 2009

This study proposes an experimental formula for cumulative runoff analysis in building roof for on-site rainwater management. We can not find an appropriate method for roof runoff analysis because of its small area scale. A new runoff equation formula for rainfall depth(D) and cumulative runoff volume(V) is developed on roof runoff conditions. Reliability of the formula is verified with field experimental runoff monitoring for two years in two buildings of rainwater management system. This experimental runoff formula can root the cumulative runoff volume from roof area and rainfall depth, then develop reasonable inflow condition for rainwater retention tank design.

• KIEAE Journal
• /
• v.14 no.5
• /
• pp.5-12
• /
• 2014

Building has been deteriorated gradually owing to geographic, physical complex and other factors. School living condition has a key role to improve the learning ability, life attitude and qualifications to adopt to social life. Therefore, it is important for school environment to keep the living condition. Repair time and scope of school facilities are required to maintain the function and performance to plan the long term repair. But there are little information about the school maintenance such as repair time and function. In this paper, it aimed at providing the service life to suggest the repair time and scope in the roof-proofing and floor finishing which used the three estimation method in probabilistic approach. The service life has a key role to decide the repair time and to make the plan for the repair maintenance. Results of this study are as follows ; First, the 1st repair time were taken through three methods in probabilistic and deterministic functions to eliminate the estimation bias. Second, the service life is suggested 36 years of an elementary school, 34 years of a middle school and 41 years of a high school. Third, the service life of a floor finishing is 43 years of an elementary, 39 years of a middle school and 41 years of a high school. The above study could not include the detailed information about the materials and repair works. Therefore it needs a further study to reflect the detailed information and to make a repair strategy.

• Journal of the Korean Institute of Rural Architecture
• /
• v.22 no.3
• /
• pp.25-32
• /
• 2020

The purpose of this study is to understand what Le Corbuiser has intended on a panoramic landscape view through his modern architectural design. This paper is willing to improve that he considered both natural and local landscape scenery, when he designed architecture with drawing images. He designed various ways to see outside scenery and community culture through ribbon windows, piloti, architectural promenade, picture frame, and rooftop garden as the angle of view inside the building, 'designed landscape panorama' from his architecture. Therefore the contents of the study include the analysis of the local landscapes shown through his architecture by photograph, drawing of a real scenery, and his sketches with biology to find what he has intended. The following conclusions have three points. First, Le Corbuiser has a basic idea to bear a natural and local scenery from his architecture through five points of new architecture. Second, pilotis, ribbon windows, and roof garden with picture frame and architectural promenade are pathways of his architecture to see 'designed landscape panorama'. Third, it comes from his early architecture like Villa Savoye in 1920s to Couvent de Sainte Marie de la Tourette in 1950s, but Ronchamp church converts his idea on previous thoughts.

• International journal of advanced smart convergence
• /
• v.11 no.3
• /
• pp.187-196
• /
• 2022

In this paper, we propose an example of designing and constructing a roof-type solar power plant structure equipped with a Pseudo-BIPV (Building-Integrated Photovoltaic) shape suitable for use as a roof of a small warehouse with a sandwich-type panel structure. As the characteristics of the roof-type solar power generation facility to be installed in the small warehouse proposed in this study, the shape of the roof is not a general A type, but a right-angled triangle shape with the slope is designed to face south. We chose a structure in which an inverter for one power plant and a control facility are linked by grouping several roofs of buildings. In addition, the height of the roof structure is less than 20 cm from the floor, and it has a shape similar to that of the BIPV, so it is building-friendly because it is almost in close contact with the roof. At the same time, the roof creates a reflective light source due to the white color. By linking this roof with a double-sided solar panel, we designed it to obtain both the advantage of the roof-friendliness and the advantage of efficiency improvement for the electric power generation based on the double-sided panel. Compared to the existing solar power generation facilities using A-shaped cross-sectional modules, the power generation efficiency of roofs in this case is increased by more than 11%, which we can confirm, through the comparison analysis of monitoring data between power plants in the same area. Therefore, if the roof-type solar structure suitable for the small warehouse we have presented in this paper is used, the facilities of electric power generation is eco-friendly. Further it is easier to obtain facility certification compared to the BIPV, and improved capacity of the power generation can be secured at low material cost. It is believed that the roof-type solar power generation facility we proposed can be usefully used for warehouse or factory-based smart housing. Sensor devices for monitoring, CCTV monitoring, or safety and environment management, operating in connection with the solar power generation facilities, are linked with the Internet of Things (IoT) solution, so they can be monitored and controlled remotely.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.59.2-59.2
• /
• 2011

This study presents a new method for coupling ArcGIS (popular GIS software) with TRaNsient SYstems Simulation (TRNSYS, reference software for researchers and engineers around the world) to use capabilities of the 4 and 5-parameter PV array performance models within the ArcGIS environment. Using the validated and industry-proven solar energy simulation models implemented in TRNSYS and other built-in ArcGIS functionalities, dynamic characteristics of distributed PV potential in terms of hourly, daily or monthly power outputs can be investigated with considerations of diverse options in selecting and mounting PV panels. In addition, the proposed method allows users to complete entire procedures in a single framework (i.e., a preliminary site survey using 3D building models, shading analyses to investigate usable rooftop areas with considerations of different sizes and shapes of buildings, dynamic energy simulation to examine the performances of various PV systems, visualization of the simulation results to understand spatially and temporally distributed patterns of PV potential). Therefore tedious tasks for data conversion among multiple softwares can be significantly reduced or eliminated. While the programming environment of TRNSYS is proprietary, the redistributable executable, simulation kernel and simulation engine of TRNSYS can be freely distributed to end-users. Therefore, GIS users who do not have a license of TRNSYS can also use the functionalities of solar energy simulation models within ArcGIS.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.4
• /
• pp.70-79
• /
• 2013

These day cities experience serious climatic changes due to environmental load caused by disturbance in the circulation systems of water resources and energy. As technological improvement to respond to various climatic changes and disasters are also requested in the field of construction, inter-disciplinary studies linked to the establishment of sustainable environmental control and energy systems is required in a consilient perspective. This study aims to infer correlations in the impact of environmental changes caused by rooftop greening system on the photovoltaic power generation efficiency through computer simulation in an integrated perspective. By doing so, it seeks to provide basic study for developing a photovoltaic system integrated with building revegetation that is sustainable in environmental and resource aspects. A simulation showed that, in the case of sunshine hours in June, the green surface indicated temperature lowering effects of $9.19^{\circ}C$ on average compared to the non-green surface and temperature was $9.81^{\circ}C$ lower. Due to such greening effects, at the highest sunlight timepoint in June, Pmpp improved 119W and heat loss rate dropped 7.8%.

• New & Renewable Energy
• /
• v.10 no.3
• /
• pp.14-21
• /
• 2014

As the world supply of fossil fuel sources decreases, the need for efficient energy consevation and develping green energy technologies becomes critical. Because of the high cost of the foundation for large turbines and optional high wind speed (over 12 m/s), it is very difficult to be located at inland city. For the solution above mentioned problem, we have been experimented about that not only using the adaption of wind power system on buildings for improving turbine efficiency, but also applying a wound rotor type induction generator for a small wind turbine.In this research, we try to find out the wind direction and wind speed those were measured every 1 min., during operation period, using the anemometers which consist of horizontally spinning cups on a vertical post. Performance testing for small wind turbine generating system was carried out by using the induction motor and invertor. Finally, we measured the power of 1 kW wind turbine system with the clamp meter and a voltmeter.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.6
• /
• pp.54-60
• /
• 2004

The purpose of this study is to analyzes the effects on planting of roof with planting block and grass in a school building where users actually spend daily life to measure indoor and outdoor temperature changes with existing roof. In case of planting of roof with a summer season, the highest temperature was shown lower about $1620^{\circ}C$ in the outdoor compared to the case of not performing it. On the other hand the lowest temperature was shown higher about $0.7^{\circ}C$ and the highest temperature lower about $1.1^{\circ}C$ in the indoor. In case of planting of roof with a winter season, the lowest temperature was shown higher about $1.712.8^{\circ}C$ compared to the case of not performing it. On the other hand, it was shown higher about $3^{\circ}C$ in the indoor. The results of this study, effects of temperature control was confirmed in the indoor where planting of roof was performed higher about $3^{\circ}C$ for winter season and lower about $1^{\circ}C$ for summer season compared to the case of indoor with existing roof.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1406-1407
• /
• 2011

태양광발전은 태양의 복사에너지를 직접 전기에너지로 변환하는 시스템으로 가동부분이나 열기관이 없어 수명이 길고 운전과 유지보수가 용이하며 모듈로 구성되기 때문에 수요나 지형에 맞게 설계할 수 있다. 이러한 특성으로 인해 태양광 발전은 차세대 성장 에너지원으로 각광 받고 있으며, 최근 문제되고 있는 지구환경문제 해결에도 부합할 수 있는 잠재력을 갖고 있다. 또한 계통 연계형 태양광 발전시스템의 확대 보급시 태양광 발전시스템의 출력특성에 의한 기존 전력계통의 피크전력을 감소시키는 효과도 기대할 수 있다. 국내 태양광발전은 정부 지원정책에 힘입어 지속적으로 보급이 확대되고 있으며, 2009년도 기준으로 약 400 MWp 이상의 설비가 전력시장에 진입하여 상업 운전중에 있다. 태양광발전시스템은 육상에 설치하는 것이 주류를 이루고 있었으나 태양광 입지조건에 적합한 부지를 확보하는 것이 쉽지않기 때문에 최근에는 건물옥상이나 벽에 설치하는 사례가 증가되고 있다. 본 논문에서는 한전전력연구원(대전시 유성구 문지동)의 건물옥상에 설치되어 운전하고 있는 9.52kW급 BIPV 형식의 태양광발전시스템을 대상으로 2010년도 1년간의 운전특성에 대하여 분석 평가하고 이를 통해 BIPV시스템의 운전에 대한 기초자료를 제시하고자 한다.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.4 no.2
• /
• pp.92-100
• /
• 2001

The purpose of this study is to develop a method to spread out the ecological ponds in urban areas more effectively. It is urgent to supply the ecological ponds in more broad scope to ensure the water space in urban areas which has been dried out. It is necessary to formulate a plan for improving the amenity in the cities through creation a biotop in swampy land by building rainfall ponds. Thus, a model of the ecological pond in this study has been developed by reviewing the related researches which provide the theoretical basis and by considering the characteristics of nature for a naturally approached pond. This study has produced a ecological pond model in order to introduce and spread out damp biotop. Ecological aspects have been mainly considered in designing and building the pond model. This model consists of areas for emerged plants and bog plants and has its advantage in providing animals and insects with habitats and shelters. In addition, the model includes areas for emerged plants, which are very effective in purification of the rainfall from the rooftop. After the construction of the pond, the plants were planted according to the plan, and the infiltration trench was installed beside the pond to drain out the overflow of the pond. The result of this research has shown the possibility of supplying the ecological pond in small parks and in schools of the city in an easy way. Through the application of this pond system, the water cycle and the ecosystem in urban areas will be improved.