• 한국정밀공학회지
• /
• 제11권2호
• /
• pp.182-188
• /
• 1994

This expermintal study is intended to investigate he development of flank wear in turning os SUS304 which is used in industrial applications and is acknowledged as a machining difficult material. In cutting process, change of velocity, change of feed, and change of depth of cut were investigated about the effect of flank wear, and slenderness ratio is also investigated. The variations of unit cutting force with the change of rake angle and the change of uncut chip area are observed. The friction angles are calculated for the change friction force and observed. The friction angles are calculated for the change friction force and normal forcd on the different rake angles. From this experimental study, the following results can be said. 1. Under the high cutting speed condition, the flaank wear is affected by the feed and depth of cut, but the influence of feed and depth of cut to the flank wear is reduced when the velocity is low. 2. The smaller slenderness ratio is, the shorter the tool life results in high cutting speed, and the lower cutting speed is, the lower the effect of slenderness ratio to the flank wear is. 3. Using the characteristics of force-RMS, the flank wear of a tool can be detected. There are almost no differences between the RMS characteristics of cutting force and feed force.

• 한국산학기술학회논문지
• /
• 제14권2호
• /
• pp.962-969
• /
• 2013

본 연구에서는 전산유체역학(CFD)를 이용하여 흄후드(fume hood)의 기류 유입특성 및 유속 분포를 평가하였다. 또한, 후드 개구면을 균일류 형성에 필요한 구조로 개선하였을 경우의 유동 특성을 예측하여 개선 효과를 검증하였다. 기존의 흄후드의 제어유속을 평가한 결과, 제곱평균(RMS)값과 비교했을 때 최대 23~30%의 편차가 있음을 확인하였다. 또한, 후드의 상부 유속이 하부 유속보다 58~68% 정도 빠른 것으로 나타나 후드 개구면에서의 유속 불균형이 매우 심한 것으로 평가되었다. 이에 후드 개구면에서의 균일한 배기흐름을 유지하기 위해 후드를 개선(안쪽벽에 배플 설치 및 슬롯 타입의 개구부 설계)한 결과, RMS값 대비 최대 7%의 편차를 보였으며 구간별 유속 편차는 최대 12% 정도로 예측되어 기존 구조에 비해 제어유속의 불균형이 많이 해소되는 것을 확인할 수 있었다.

• 한국운동역학회지
• /
• 제30권1호
• /
• pp.73-81
• /
• 2020

Objective: The purpose of this study is to analyze the effects of aquatic walking exercise on gait and balance parameters of elderly women. Method: 15 elderly people were recruited for this study (age: 73.20±5.19 yrs, height: 153.87±3.36 cm, mass: 60.33±5.73 kg). All variables were measured using Gaitview AFA-50. The variables were the heel contact time ratio, gait angle, and M/P change ratio for gait patterns and ENV, REC, RMS, Total Length, TLC, Sway velocity, and Length/ENV for balance abilities. A paired t-test and the Wilcoxon signed-rank test were carried out to verify the differences in the test scores after participating in the water walking program. The significance level for all statistical analyses was set to α=.05. Results: As for the changes in their walking function after the exercise, heel contact time ratio (p<.01) showed a statistical significance, while gait angle and M/P change ratio did not reveal statistically significant differences. In the test of balance ability on both feet and with eyes opened, statistical significance was found in ENV, REC, RMS, TLC (p<.01), and sway velocity (p<.05), while the test with eyes closed showed statistical significance in length/ENV as well as ENV, REC, RMS, sway velocity (p<.01) TLC, and total length (p<.05). As for the single-leg stance balance ability, ENV and REC revealed statistically significant differences. Conclusion: These results show that water walking is effective for improving the function of the ankle flexor muscles, providing stability to the ankle joint during walking and helping efficient walk. In addition, it is also expected to help prevent falls due to loss of balance by improving the stability of lower extremity muscles and trunk.

• Journal of Sport and Applied Science
• /
• 제7권2호
• /
• pp.1-12
• /
• 2023

Purpose: The purpose of this study was to investigate the possibility of modified swing to prevent shoulder injury by analyzing differences in the muscle activation patterns of upper limb by the swing method in wheelchair badminton players. Research design, data, and methodology: 10 wheelchair badminton players participated in the experiment as subjects and performed 10 high clears and 10 smashes in both traditional and modified swing methods toward a shuttlecock hung at the height of racket impact point. For each trial, activation patterns of biceps brachii, triceps brachii, anterior deltoid, and posterior deltoid were measured from the upper limb participating in the swing from which the duration, peak, and root mean square (RMS) of electromyography (EMG) activities from swing initiation to shuttle impact were calculated. The maximum swing velocity of the smash and the distance of the high clear were also measured with both methods to compare differences in the swing velocity and shuttle hit distance. Results: Differences in the EMG peak and RMS of the anterior deltoid by swing methods were shown to differ by the skill type, being higher in the traditional swing method than the modified during only the high clear. The EMG peak and RMS, and the duration of the posterior deltoid were higher and longer with the traditional swing method than the modified during both the smash and high clear. The intensities of the biceps brachii and triceps brachii activities measured during the smash and high clear were higher in the traditional swing method than the modified, and the biceps brachii and triceps activity durations during the high clear were shorter in the modified swing method than the traditional. The maximum swing velocity of the smash was faster with the traditional swing method than the modified, while the distance of the high clear did not differ significantly. Conclusions: These results suggest that the modified swing can be an effective performance method for preventing shoulder injuries without undue loss of impact power in wheelchair badminton players by reducing excessive loads imposed on the shoulder and allowing the optimal use of the elbow extension.

• 대한기계학회논문집B
• /
• 제27권8호
• /
• pp.1089-1096
• /
• 2003

An experiment was performed to investigate lift-off, blow-off and combustion characteristics of a lifted coaxial diffusion flame according to fuel jet and air velocity. A jet diffusion flame which is attached on the nozzle rim begins to be lifted with increase of air velocity, and finally becomes blow-off at higher air velocity. In experiment, blow-off limit increased with increase of fuel jet velocity, however lift-off occurred at lower air velocity. Flame structure and combustion characteristics were examined by schlieren photos, temperature distributions and emission concentration distributions. Flame temperature became higher at midstream and its RMS became larger at up and downstream with increase of air velocity. Local NO concentration decreased but $CO_2$concentration increased with increase of air velocity, which shows combustion reaction becomes close to be stoichiometric at higher air velocity in spite of lift-off.

• 대한물리치료과학회지
• /
• 제11권2호
• /
• pp.27-37
• /
• 2004

The propose of the study was to evaluate the efficacy of the partial body weight support during treadmill training on the ambulation in elderly with chronic stroke. Fourteen hemiplegic volunteers participated and were divided into an experimental and control groups. In the experimental group, the body weight support during treadmill training was performed 3 times per week for 6 weeks. In the control group, usual treadmill training was applied. Before and after experiments, temporal-spatial gait parameters were measured. The date of 14 patients who carried out the whole experimental course were statistically analyzed. The results of the study were : 1. In the comparison of gait velocity before and after experiment, the gait velocity was significantly increased in the experimental group and the control group(p<.05). In the comparison of difference of the gait velocity between groups, there was not significant difference between the experimental group and the control group(p>.05). 2. In comparison of gait cadence before and after experiment, the gait cadence was significantly increased in both groups(p<.05). In the comparison of difference of the gait cadence between groups, there was not significant difference between the experimental group and the control group(p>.05). 3. In the comparison of step length before and after experiment, the step length was significantly increased in the experimental group and the control group(p<.05). In the comparison of difference of the step length between groups, there was not significant difference between the experimental group and the control group(p>.05). 4. In the comparison of vastus medialis root mean square(RMS) before and after experiment, the vastus medialis RMS was significantly increased in the experimental group(p<.05). In the comparison of vastus medialis root mean square(RMS) before and after experiment, the vastus medialis RMS was not significantly increased in the experimental group(p>.05). In the comparison of difference of the vastus medialis RMS between groups, there was not significant difference between the experimental group and the control group(p>.05). 5. In the comparison of latency of somatosensory evoke potential(SSEP) before and after experiment, the latency of SSEP was significantly increased in the experimental group(p<.05). In the comparison of latency of somatosensory evoke potential(SSEP) before and after experiment, the latency of SSEP was significantly decreased in the control group(p>.05). In the comparison of difference of the latency of SSEP between groups, there was not significant difference between the experimental group and the control group(p>.05). 6. In the comparison of functional ambulation profile(FAP) before and after experiment, the FAP was not significant difference in the experimental group and the control group(p>.05). In the comparison of difference of the FAP between groups, there was not significant difference between the experimental group and the control group(p>.05).

• 전기학회논문지
• /
• 제59권3호
• /
• pp.674-677
• /
• 2010

The purpose of this study was to analyze bradykinesia of forearm movement in patients with Parkinson's disease (PD) as compared to those of normal subjects. A gyrosensor was selected for the measurement of forearm movement, because it can provide angular velocity signal which is free from the gravitational artifact and also because it can be conveniently used during clinical test of bradykinesia. Forty PD patients (age: $65.7\pm11.1$ yrs, H&Y stage:$2.3\pm0.5$), 14 age-matched elderly subjects ($65\pm3.9$ yrs) and 17 healthy young subjects ($24\pm2.1$ yrs) participated in this study. Angular velocity during forearm movement of pronation/supination was measured in both arms. Suggested quantitative measures of bradykinesia were root-mean-squared (RMS) angular velocity, RMS angle, peak power and total power which were derived from the angular velocity. ANOVA showed that all measures were significantly different among three groups (p<0.001). Subsequent post-hoc test revealed that all measures in PD patients were significantly smaller than in healthy elderly and healthy young subjects (p<0.05). This results suggest that PD patients can be differentiated from normal subjects using suggested measures.

• 한국수산과학회지
• /
• 제19권3호
• /
• pp.274-280
• /
• 1986

대, 소조기에 마산만에서 연속관측한 자료를 사용하여 만구 단면의 유속 변동특성을 구명하기 위하여 net velocity와 RMS속도의 등양선 및 순 유출입량을 계산하여 검토하였다. 최강유속은 수도 중앙과 서부의 4m 이하의 표층에서 나타나고, 최대 유입속도 24cm/sec 최대 유출속도는 15 cm/sec이다. 최강유속 시간임에도 불구하고 4m 이심에서는 유속이 약하여 $0{\sim}2cm/sec$에 불과하다. 만구 단면의 가장자리의 상층에 역류가 존재한다. net velocity는 비가 오지 않은 대조기의 경우 유출유속은 만구단면 서부에서 나타나며, 유입유속은 단면 동부에서 나타난다. 비온 직후의 소조기에는 이와 정반대로 흐른다. RMS속도의 최대 세기는 대조기에 $11.3{\sim}15.0cm/sec$, 소조기에 $7{\sim}10.3cm/sec$로서 단면 서부의 표층에 있으며, 매 조석주기마다 거의 동일위치에서 계속 존재한다. 순 통과유량은 건기에 $-39.7m^3/sec$, 우기 $-170m^3/sec$로서 유출이 탁월하다. 항유성분은 건기에는 조석잔차류가 우세하지만, 소조기의 강우시에는 밀도류가 우세한 것으로 추리된다.

• 한국정밀공학회지
• /
• 제20권3호
• /
• pp.82-88
• /
• 2003

The nondestructive internal quality evaluation of agricultural products has been strongly required from the needs for individual inspection. Recently, the ultrasonic wave has been considered as a solution fur this problem, and an ultrasonic system was constructed for the ultrasonic NDE of fruits and vegetables in our previous work. In this paper, the practical applicability of our ultrasonic system is tested fur the inspection of internal defects (central cavity) in Atlantic potato. Sound speed and RMS of transmitted ultrasonic wave signal were measured and classification algorithm using 2 dimensional stochastic analysis. was presented. Experimental results showed greater value of sound speed and RMS (root mean square) of transmitted signal in normal samples than in abnormal samples with cavity. Also a stochastic method to distinguish normal and abnormal showed fault detection rate less than 5%.

• 자원환경지질
• /
• 제30권5호
• /
• pp.469-476
• /
• 1997

In the conventional velocity analysis, the peaks of a semblance panel are picked and the stacking velocities of the peaks are assumed as RMS velocities from which interval velocities are determined. This velocity analysis technique is correct only for horizontal homogeneous layes and incurs error in a layer whose velocity varies laterally. Tediousness of peak picking and error in velocity analysis can be reduced by automatic velocity analysis techniques. An automatic velocity analysis algorithm has been presented in order to improve these problems by considering the stacking velocity from the view point of interval velocity model and by relating the stacking velocity and the interval velocity with the traveltimes. In this paper, we apply the automatic velocity analysis method to simple models having lateral velocity anomaly to verify the effectivenesses and limits of this method. From the results of numerical experiments, we can determine the interval velocites without pickings of the stacking velocities in the one-dimensional velocity analysis and the general patterns of the laterally varying interval velocities appear in the two-dimensional case. However, the interval velocity and the depth of velocity anomaly determined by two-dimensional automatic velocity analysis are somewaht discrepant in those of the theoretical model.