• 한국해양학회지
• /
• 제29권3호
• /
• pp.278-286
• /
• 1994

서해 경기만은 조류방향과 대체로 일치하는 조류성사퇴가 해저면에 발달하고 있으 며, 또 하나의 사퇴구조가 탄성과 퇴적단위내에 매몰되어 나타난다. 이돌 사퇴의 발생 기원과 퇴적환경규명을 위해 팔미도 부근의 사퇴해역에서 획득된 고해상도 탄성피자 료, 표층퇴적물, 주상퇴적물에 대한 정밀 분석 및 연구가 실시되었다. 팔미도 부근의 사퇴 발달해역은 3개의 탄성과 퇴적단위로 구분되며 (unit A, B, C), 각 퇴적단위내에 는 각각 하나의 사퇴가 나타난다(ridge A, B, C). 최상부 퇴적단위내의 사퇴 A 는 조 류방향과 대체로 평행한 북동-남서방향으로 발달하고 있으며 (41$^{\circ}$), 남동방향을 향하 는 사층리 반사구조가 나타난다. 이는 사퇴가 점차 남쪽방향으로 이동되고 있음을 시 사하고 있다. 퇴적단위 B는 하나의 사퇴(ridge B)와 수로충진 구조로 이루어져 있으 며, 사퇴 A와 비교할 때 대체로 유사한 방향, 규모, 내부구조 등을 보이고 있다. 이러 한 사실은 퇴적단위 B가 현재보다 수심의 약 10 m 낮았던 시기에 현재와 유사한 환경 에서 사질퇴적물의 이동에 의해 사퇴 B가 형성되었으며, 해수면이 상승하면서 세립질 퇴적물이 사퇴의 골짜기에 퇴적되어, 수로와 유사한 형태 또는 수평층리된 형태의 수 로충진구조를 나타내는 것으로 해석된다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권6호
• /
• pp.575-579
• /
• 2006

Purpose : The purpose of this study was to evaluate peri-implant bone loss and implant success on anterior maxillary alveolar ridges and Compare Class III and Class IV ridges in the aspect of peri-implant bone loss. Material and Methods : 14 patients (aged 21 to 68, 6males and 8females), who lacked maxillary anterior teeth and were installed from January 2000 to April 2003 at Samsung Medical Center, were selected. The type of implant used included 30 $Br\ddot{a}nemark$ implant. They were taken with digital tomographic and conventional intraoral radiographic examinmation, and were treated with implant installaion without bone augmentation. The peri-implant bone resorption was measured at the mesial and distal aspect of implant on the conventional intraoral radiographs. Results : The study classified the anterior maxillary alveolar ridge and measured peri-implant bone resorption from the period of implant installation to the 2nd year after functional loading radiographically. The study revealed no statistically significant difference between two groups, which was classified by its morphology. The average bone resorption on healing period before loading was 0.18mm and 0.18mm, the 1st year of loading period, 0.77 mm and 0.84mm, and on the 2nd year of loading period, 0.07mm and 0.06mm, respectively on both Class III and class IV. Conclusion : In the knife edge form of anterior maxillary residual ridges(Class IV), implant placement without ridge augmentation does not have significant difference with that of Class III alveolar ridge in the concern of Implant success after 2 year functional loading period in the aspect of peri-implant bone resorption radiographically.

• Applied Microscopy
• /
• 제19권2호
• /
• pp.27-42
• /
• 1989

The forming process of scale and socket of Pieris rapae L. during in 30 hr. pupa to in adult was morphologically investigated with scanning electron microscopy and transmission electron microscopy. 1. The scale forming cells which were distinguished from other epidermal cells were first observed in 30 hr. pupa. In the aspect that scale forming cell beared some morphological relations to socket forming cells and in the distribution of its organelles, scale forming cell was divided into three regions-basal region in which nucleus located, neck region which was surrounded by socket forming cells and scale region that was the cytoplasmic projection region over the wing surface. In process of the development of scale forming cell neck region and scale region were extended into the molting space and at this time, the changes of surface structure of scale region have occurred initially. 2. There was a more distinct process that scale region changed into the scale. Scale region which was first originated as clublike projection of the cell body was subsequently elongated and flattened out by broadening of the cytoplasm. After that, in the surface of scale were formed longitudinal ridges and microribs. In the late pupa, the cytoplsam of scale region have autolyzed by lysosome-like bodies and at length, scale which had air spaces, trabecula, pigment granules, longitudinal ridges and transverse ridges. 3. The major protion of socket forming cell located beside neck region of scale forming cell under the wing surface but the processing portion of the cell lay over the wing surface, suggesting that socket forming cells have actively processing. In extending to the molting space of neck and scale region, socket forming cells developed to the molting space and constructed socket.

• 한국식품과학회지
• /
• 제10권1호
• /
• pp.36-45
• /
• 1978

맥백혈구(脈白血球) Lysosomal 효소를 pH(7.0, 4.0), 온도($37^{\circ}C$, $4^{\circ}C$) 및 처리기간($37^{\circ}C$에서 12 24시간, $4^{\circ}C$에서 36 168시간)을 달리하여 처리(處理)한 우(牛)의 요근조직(腰筋組織)의 변화(變化)에 대(對)하여 endomysial connective tissue, sarcolemma 및 transverse ridge등 근(筋)섬유 표면조직(表面組織)의 변화(變化)를 SEM으로 관찰한 바, 처리온도(溫度)에 관계(關係)없이 pH 7.0에서는 endomysial connective tissue, sarcolenna 및 transverse ridge의 분해(分解)를 나타내어 이 효소의 높은 역가(力價)를 보였으나, pH4.0에서는 이들 표면조직(表面組織)에 변화(變化)가 없었으며 특(特)히 transverse ridge는 $37^{\circ}C$에서 24시간, 그리고 $4^{\circ}C$에서 7일간 처리(處理)하여도 변화(變化)를 나타내지 않아 안정(安定)됨을 보였다.

• 한국응용곤충학회지
• /
• 제60권4호
• /
• pp.417-422
• /
• 2021

월동기 논과 논두렁에서 서식하고 있는 다양한 절지동물의 발생밀도를 조사하여 생물다양성에 대한 정보를 제공하고자 본 연구를 수행하였다. 동력흡충기를 이용하여 논과 논두렁에서 각각 5지점씩 50×50 cm 격자 내에 있는 지표면과 식물을 흡입하여 채집하였다. 논과 논두렁에서 채집한 총개체수는 41,197개체였으며, 대부분 Collembola, Hemiptera, Diptera가 많이 채집되었다. 영농형태별 유기농법 재배지와 관행농법 재배지에서의 절지동물 출현패턴은 거의 유사하였으나 채집된 개체수는 유기농법 재배지에서 더 많았다. 종다양성지수, 종풍부도지수, 종균일도 지수는 논보다는 논두렁에서 모두 높게 나타났고, 시기별로 큰 차이를 보였는데 이는 통계적으로 유의하였다(P < 0.05).

• Journal of Periodontal and Implant Science
• /
• 제49권4호
• /
• pp.237-247
• /
• 2019

Purpose: To analyze the maxillary sinus anatomy over edentulous ridges in the bilateral posterior maxillary area in Taiwanese patients using cone-beam computed tomography (CBCT). Methods: In total, 101 anatomical sites from 61 patients, including 32 premolar and 69 molar regions, were analyzed using CBCT. Measurements were made of the width and height of edentulous ridges, the thickness of the lateral wall of the maxillary sinus, and the presence of a sinus septum and the posterior superior alveolar artery (PSAA). A statistical analysis of the measurements was performed, and correlations among the measurements were assessed. Results: The average ridge width was $10.26{\pm}3.16mm$, with a significantly greater ridge width in the second molar region than in the premolar region. The mean residual ridge height was $8.55{\pm}4.09mm$, and ridge height showed an opposite trend from ridge width for the premolar and molar regions. A sinus septum was present at 5.9% of the sites, and the PSAA was observed in 24.5%. The average thickness of the lateral wall of the maxillary sinus was $2.08{\pm}0.94mm$, with no significant difference between the tooth position and lateral wall thickness. Conclusions: This study presents the anatomical features of the maxillary sinus, which should be considered in sinus lift procedures for implant placement, in the Taiwanese population. The use of CBCT is recommended to avoid intraoperative complications.

• ALGAE
• /
• 제22권4호
• /
• pp.325-331
• /
• 2007

Cryptoglena pigra Ehrenberg from Korea was a photosynthetic euglenoid alga, which had typical characteristics of the Euglenales. The ultrastructure examination of C. pigra revealed certain features which were distinctly photosynthetic euglenoid: one U-shaped chloroplast with thylakoid membranes; two paramylon grains appressed to both sides of the chloroplast; eyespot associated with the chloroplast but not part of it. Three flagellar roots were associated with the two basal bodies. The four-membered dorsal root arose from the dorsal body and extended anteriorly following the reservoir membrane. At the base of the reservoir the dorsal band was nucleated by the dorsal root and it ran anteriorly between the reservoir membrane and eyespot. The dorsal band was continued with the microtubules of the canal and the pellicle. The singlet dorsal microtubules at the transition level arranged into doublets by a successive linkage of the existing adjacent microtubules, and the doublets rearranged into the cytoskeletal microtubules that were continuous with four microtubules in pellicles. Finally, the sixteen ridges gave rise to the pellicular ridges. The five to six-membered ventral root extended anteriorly into a cytoplasmic pocket through the reservoir and lined a cytoplasmic pocket.

• 한국정보통신학회논문지
• /
• 제8권8호
• /
• pp.1740-1747
• /
• 2004

본 논문에서는 지문 융선의 방향정보를 검출하는 효과적인 방법을 제안하였다. 제안방법은 먼저 지문영상을 정규화하고 융선이 있는 전경영역과 융선이 없는 배경영역으로 분할하여 문턱값으로 이진영상으로 변환한다. 전경영역은 융선(ridge)과 골(valley)부분으로 구성되는데 융선의 경계를 런길이 부호를 이용하여 체인코드로 표현한다. 지문 융선의 각 화소에서 방향정보를 검출하기 위해서 체인코드로 표현된 융선 경계를 추적하면서 방향정보를 구한다. 그리고 일정한 블록내의 융선방향은 급격하게 변하지 않으므로 블록별로 평활화하여 각 화소의 방향정보를 구한다. 제안방법의 성능평가를 위해 NIST 및 FVC2002 지문데이터베이스를 이용하여 컴퓨터시뮬레이션을 수행하였다. 실험 결과 제안방법을 지문 융선의 방향정보를 효과적으로 검출하는데 이용할 수 있음을 보였다.

• Animal Systematics, Evolution and Diversity
• /
• 제28권2호
• /
• pp.71-83
• /
• 2012

In this study, a new species, $Dimorphostylis$ $breviplicata$ n. sp. is described and illustrated on the basis of specimens collected from the shallow Korean waters. This new species is similar to $Dimorphostylis$ $brevicaudata$ (Zimmer, 1903), $Dimorphostylis$ $acroplicata$ Harada, 1960 and $Dimorphostylis$ $valida$ Gam$\hat{o}$, 1962 in that the carapace has three pairs of oblique ridges on the surface. However, the new species is distinguished by the combination of the following features: the middle oblique ridge is short and not joined to the other oblique ridges; the transverse ridge is absent on the frontal lobe; the dorso-median process on the pereonite 5 is only barely visible; the male telson has no short stout seta on the both lateral margins; the length ratio of the first to remaining articles combined on the male uropod is 1 : 0.7. A key to the Korean $Dimorphostylis$ species is provided. Also, $Diastylis$ $alaskensis$ Calman, 1912 is redescribed as a new recorded species of the Korean fauna.

• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.2120-2125
• /
• 2015

In this paper, a rectangular waveguide probe with a ridge-loaded straight slot (RLSS) is presented for a near-field scanning microwave microscope (NSMM). The RLSS is located laterally at the end wall of the cavity and is loaded on double ridges in a narrow straight slot to improve the spatial resolution compared with a straight slot. The probe consists of a rectangular cavity with an RLSS and a feed section of a WR-90 rectangular waveguide. When the proposed NSMM is located at distance of 0.1mm in front of a substrate without patches or strips, the simulated full width at half maximum (FWHM) of the probe improve by approximately 31.5 % compared with that of a straight slot without ridges. One dimensional scanning of the E-plane on a sample under test was conducted, and the reflection coefficient of the near-field scanning probe is presented.