• Journal of Digital Contents Society
• /
• v.19 no.9
• /
• pp.1787-1793
• /
• 2018

Shadow is a common phenomenon observed in natural scenes, but it has a negative influence on image analysis such as object recognition, feature detection and scene analysis. Therefore, the process of detecting and removing shadows included in digital images must be considered as a pre-processing process of image analysis. In this paper, the existing methods for acquiring 1D invariant images, one of the feature elements for detecting and removing shadows contained in a single natural image, are described, and a method for obtaining 1D invariant images based on linear regression has been proposed. The proposed method calculates the log of the band-ratio between each channel of the RGB color image, and obtains the grayscale image line by linear regression. The final 1D invariant images were obtained by projecting the log image of the band-ratio onto the estimated grayscale image line. Experimental results show that the proposed method has lower computational complexity than the existing projection method using entropy minimization, and shadow detection and removal based on 1D invariant images are performed effectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1773-1779
• /
• 2015

Shore-to-sea visible light communication using color clustered multiple-input and multiple-output (MIMO) is presented. The proposed maritime visible light communication (MVLC) offers a low-cost, high-speed wireless link for shore-to-sea maritime communications. Each color cluster is comprised of 50 red, green and blue (RGB) light emitting diodes (LEDs) and is modulated using on-off-keying (OOK). Selection combining is performed at the receiver, producing diversity effect within that color cluster. In this paper, we employ sea states (wave height, wind speed, etc.) data from both Pierson-Moskowitz and JONSWAP spectrum models under atmospheric turbulence conditions. Based on the simulation model, the maritime link quality is analysed in terms of coverage distance and bit error rate performance. The results show that the proposed system provides an efficient MVLC, while satisfying International Association of Lighthouse Authorities (IALA) requirements for maritime buoyage system and also offering sufficient illumination from high power LEDs.

• Journal of Broadcast Engineering
• /
• v.18 no.2
• /
• pp.159-166
• /
• 2013

In this paper, we propose a transmission rate compensation method to remove a haze of an image by using edge information of a haze image and image segmentation. With a hazed image, it is difficult not only to recognize objects in the image but also to use an image processing method. One of the famous defogging algorithm named 'Dark Channel Prior'(DCP) is used to predict fog transmission rate using dark area of an image, and eliminates fog from the image. But there is a big possibility to calculate a wrong transmission rate if the area of high RGB values is larger than the area of the reference area. Therefore we eliminate color distortion area to calculate transmission rate by using the propose method, and obtain a natural clean image from a hazed image.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.3
• /
• pp.51-57
• /
• 2021

In this paper, we propose a method to find the DoF(Depth of field) that is blurred in an image by focusing and out-focusing the camera through a efficient convolutional neural network. Our approach uses the RGB channel-based cross-correlation filter to efficiently classify the DoF region from the image and build data for learning in the convolutional neural network. A data pair of the training data is established between the image and the DoF weighted map. Data used for learning uses DoF weight maps extracted by cross-correlation filters, and uses the result of applying the smoothing process to increase the convergence rate in the network learning stage. The DoF weighted image obtained as the test result stably finds the DoF region in the input image. As a result, the proposed method can be used in various places such as NPR(Non-photorealistic rendering) rendering and object detection by using the DoF area as the user's ROI(Region of interest).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1477-1485
• /
• 2021

Recently, super-resolution has been intensively studied only on upscaling models with integer magnification. However, the need to expand arbitrary magnification is emerging in representative application fields of actual super-resolution, such as object recognition and display image quality improvement. In this paper, we propose a model that can support arbitrary magnification by using the weights of the existing integer magnification model. This model converts super-resolution results into the DCT spectral domain to expand the space for arbitrary magnification. To reduce the loss of high-frequency information in the image caused by the expansion by the DCT spectral domain, we propose a high-frequency attention network for arbitrary magnification so that this model can properly restore high-frequency spectral information. To recover high-frequency information properly, the proposed network utilizes channel attention layers. This layer can learn correlations between RGB channels, and it can deepen the model through residual structures.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.2
• /
• pp.23-34
• /
• 2004

Video camera can be a useful tool to capture images for use in colorimeter. However the RGB signals generated by different video camera are not equal for the same scene. The video camera for use in colorimeter is characterized based on the CIE standard colorimetric observer. One method of deriving a colorimetric characterization matrix between camera RGB output signals and CIE XYZ tristimulus values is least squares polynomial modeling. However it needs tedious experiments to obtain camera transfer matrix under various white balance point for the same camera. In this paper, a new method to obtain camera transfer matrix under different white balance by using 3${\times}$3 camera transfer matrix under a certain white balance point is proposed. According to the proposed method camera transfer matrix under any other white balance could be obtained by using colorimetric coordinates of phosphor derived from 3${\times}$3 linear transfer matrix under the certain white balance point. In experimental results, it is demonstrated that proposed method allow 3${\times}$3 linear transfer matrix under any other white balance having a reasonable degree of accuracy compared with the transfer matrix obtained by experiments.

• Korean Journal of Remote Sensing
• /
• v.33 no.3
• /
• pp.257-266
• /
• 2017

In this study, the dust/smoke detection algorithm was developed with a multi-spectral satellite remote sensing method using Moderate resolution Imaging Spectroradiometer (MODIS) Level 1B (L1B) data and the results were validated as RGB composite images of red(R; band 1), green(G; band 4), blue(B; band 3) channels using MODIS L1B data and Cloud-Aerosol Lidar with Orthogonal Polarization Satellite Observations(CALIPSO) Vertical Feature Mask (VFM) product. In the daytime on March 30, 2007 and April 27, 2012, the consistencies between the dust/smoke detected by this algorithm and verification data were approximately 56.4 %, 72.0 %, respectively. During the nighttime, the similar consistency was 40.5 % on April 27, 2012. Although these results were analyzed for limited cases due to the spatiotemporal matching for the MODIS and CALIPSO satellites, they could be used to utilize the aerosol detection of geostationary satellites for the next generations in Korea through further research.

• Journal of Broadcast Engineering
• /
• v.18 no.1
• /
• pp.21-30
• /
• 2013

It is a challenging problem to most of the image processing when the light source is unknown. The color of the light source must be estimated in order to compensate color changes. To estimate the color of the light source, additional assumption is need, so that we assumed color distribution according to the light source. If the pixels, which do not satisfy the assumption, are used, the estimation fails to provide an accurate result. The most popular color distribution assumption is Grey-World Assumption (GWA); it is the assumption that the color in each scene, the surface reflectance averages to gray or achromatic color over the entire images. In this paper, we analyze the characteristics of the camera response function, and the effect of the Grey-World Assumption on the pixel value and chromaticity, based on the inherent characteristics of the light source. Besides, we propose a novel method that detects important pixels for the color estimation of the light source. In our method, we firstly proposed a method that gives weights to pixels satisfying the assumption. Then, we proposed a pixel detection method, which we modified max-RGB method, to apply on the weighted pixels. Maximum weighted pixels in the column direction and row direction in one channel are detected. The performance of our method is verified through demonstrations in several real scenes. Proposed method better accurately estimate the color of the light than previous methods.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.4 s.304
• /
• pp.51-58
• /
• 2005

This paper proposes a robust scene change detection technique that uses the weighted chi-square test and the automated threshold-decision algorithms. The weighted chi-square test can subdivide the difference values of individual color channels by calculating the color intensities according to NTSC standard, and it can detect the scene change by joining the weighted color intensities to the predefined chi-square test which emphasize the comparative color difference values. The automated threshold-decision at algorithm uses the difference values of frame-to-frame that was obtained by the weighted chi-square test. At first, The Average of total difference values is calculated and then, another average value is calculated using the previous average value from the difference values, finally the most appropriate mid-average value is searched and considered the threshold value. Experimental results show that the proposed algorithms are effective and outperform the previous approaches.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.6 s.38
• /
• pp.65-74
• /
• 2005

This Paper Propose a robust scene change detection technique that use the weighted chi-square test and the automated threshold-decision algorithm. The weighted chi-test can subdivide the difference values of individual color channels by calculating the color intensities according to mSC standard, and it can detect the scene change by joining the weighted color intensities to the predefined chi-test which emphasize the comparative color difference values. The automated decision algorithm uses the difference values of frame-to-frame that was obtained by the weighted chi-test. In the first step, The average of total difference value and standard deviation value is calculated and then, subtract the mean value from the each difference values. In the next step, the same process is performed on the remained difference value. The propose method is tested on various sources and in the experimental results, it is shown that the Proposed method is efficiently estimates the thresholds and reliably detects scene changes.