• Nuclear Engineering and Technology
• /
• v.51 no.2
• /
• pp.556-560
• /
• 2019

To provide high shunt impendence with low power losses, an 81.25 MHz continuous wave (CW) radio frequency quadrupole (RFQ) accelerator has been designed and machined as parts of the Low Energy Accelerator Facility (LEAF). In this paper, the mechanical structure and the main processing technology of the RFQ cavities are described according to the physical and geometric parameters requirements of the RFQ. The fabrication of the RFQ has been completed and the test results agree well with the design requirements. The RFQ accelerator will work in Institute of Modern Physics, Chinese Academy of Sciences in 2018.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.957-962
• /
• 1998

As the first stage accelerator of the Korea Multipurpose Accelerator Complex (KOMAC) 1GeV proton linac, a 350MHZ, cw Radio-Frequency Quadrupole (RFQ) will be built to produce 20㎃ of 3Mev. High current RFQ with cw operation is a major program in the KOMAC project to understand beam dynamics, engineering design, construction, control and diagnostics techniques. The beam dynamics and the engineering design of RFQ are described and the present status of the KOMAC RFQ project is discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.243-244
• /
• 2013

Over the past 15 years, several groups have incorporated radio-frequency quadrupole (RFQ) based instruments before the accelerator in accelerator mass spectrometry (AMS) systems for ion-gas interactions at low kinetic energy (＜40 eV). Most AMS systems arebased on a tandem accelerator, which requires negative ions at injection. Typically, AMS sensitivity abundance ratios for radioactive-to-stable isotope are limited to Xr/Xs ＞10^-15, and the range of isotopes that can be analyzed is limited because of theneed to produce rather large negative ion beams and the presence of atomic isobaric interferences after stripping. The potential of using low-kinetic energy ion-gas interactions for isobar suppression before the accelerator has been demonstrated for several negative ion isobar systems with a prototype RFQ system incorporated into the AMS system at IsoTrace Laboratory, Canada (Ontario, Toronto). Requisite for any such RFQ system applied to very rare isotope analysis is large transmission of the analyte ion. This requires proper phase-space matching between the RFQ acceptance and the ion beam phase space (e.g. 35 keV, ${\varphi}3mm$, +-35 mrad), and the ability to control the average ion energy during interactions with the gas. A segmented RFQ instrument is currently being designed at Korea Institute for Science and Technology (한국과학기술연구원, KIST). It will consist of: a) an initial static voltage electrode deceleration region, to lower the ion energy from 35 keV down to ＜40 eV at injection into the first RFQ segment; b) the segmented quadrupole ion-gas interaction region; c) a static voltage electrode re-acceleration region for ion injection into a tandem accelerator. Design considerations and modeling will be discussed. This system should greatly lower the detection limits of the 6 MV AMS system currently being commissioned at KIST. As an example, current detection sensitivity of 41Ca/Ca is limited to the order of 10^-15 while the 41Ca/Ca abundance in modern samples is typically 41Ca/Ca~10^-14 - 10^-15. The major atomic isobaric interference in AMS is 41K. Proof-of-principal work at IsoTrace Lab. has demonstrated that a properly designed system can achieve a relative suppression of KF3-/41CaF3- ＞4 orders of magnitude while maintaining very high transmission of the 41CaF3- ion. This would lower the 41Ca detection limits of the KIST AMS system to at least 41Ca/Ca~10^-19. As Ca is found in bones and shells, this would potentially allow direct dating of valuable anthropological archives and archives relevant to our understanding of the most pronounced climate change events over the past million years that cannot be directly dated with the presently accessible isotopes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.33-33
• /
• 1999

The design of a vacuum pumping system for the KOMAC (Korea Multipurpose Accelerator Complex) RFQ(Radio-Frequency Quadrupole) linac is described. [Fig] Resulted from the lost proton beam, gas streaming from the LEBT (Low Energy Beam Transport) and out-gassing from the surfaces of the RFQ cavity and vacuum plumbing, the total gas load will be on the order of 7.2$\times$10-4 Torr-liters/sec, consisting mainly of hydrogen. The system designed to pump on a continual basis with redundancy to ensure that the minimal operating vacuum level of 1.0$\times$10-6 Torr is maintained even under abnormal conditions. Details of the design, performance analysis and the preliminary test results of the cryogenic pumps are presented.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.10a
• /
• pp.915-916
• /
• 2005

The high power RF system for the PEFP 20MeV proton accelerator composed of the 3MeV RFQ and the 20MeV DTL has been installed. The klystron for the RFQ was tested up to 600kW and operated routinely to drive the RFQ in a pulse mode operation. The klystron for the DTL which consists of 4 tanks was tested up to 800kW in pulse mode operation. The pulse width and repetition rate was 50${\mu}s$ and 1Hz respectively. The high power RF system has been operated to drive each accelerating structure and will be used to accelerate 20MeV proton beam.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.683-684
• /
• 2004

The RF system for PEFP 20MeV proton linear accelerator is described. The RF system for 3MeV RFQ was already installed and operated to drive the RFQ. The klystron was tested up to 600kW itself and operated up to 350kW routinely. The HPRF dummy load was stabilized with the change of the coolant. Preparation of 20MeV DTL HPRF test has been completed. LCP and PLC system for klystron power supply was already prepared. Voltage fluctuation was measured during klystron test. Voltage control feedback loop seems to be re-adjusted.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.10a
• /
• pp.377.2-377
• /
• 1999

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.10a
• /
• pp.369.1-369
• /
• 2001

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.736-737
• /
• 2004

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.1056-1057
• /
• 2005