• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.64.2-64.2
• /
• 2012

전자산업에서 소자를 제작하는 핵심공정으로써, 패턴을 형성하는 방식은 식각 마스크를 통해 이루어진다. 공정 순서는 원하는 물질을 증착한 후 사진공정 (photolithograpy)을 통하여 원하는 패턴의 감광제 식각마스크 (etch mask)를 형성하게 된다. 이후, 습식식각이나 건식식각을 통하여 물질의 불필요한 부분을 제거한 후 최종적으로 감광제 식각마스크를 제거하여 원하는 물질의 패턴을 얻게 된다. 최근에 소개된 잉크젯 프린팅 기술 (inkjet printing technology)은 나노 잉크를 이용하여 사진공정과 식각공정을 이용하지 않고, 직접 나노잉크를 분사하여 패턴을 형성하는 방법으로, 패터닝 공정을 단순화 시킬 수 있을 뿐만 아니라 각종 전자 산업의 환경오염물을 획기적으로 줄일 수 있는 친환경기술이다. 특히, OLED, O-TFT, RF-ID, PCB 분야 등 다양한 전자산업분야의 제조기술로서 응용하고자, 전도성 폴리머나 실버 (silver) 나노파티클 잉크를 이용한 전도성 라인 패터닝 (line patterning)에 관한 연구가 활발히 진행되고 있다. 본 강연에서는 친환경 생산공정기술 측면에서의 잉크젯기술을 분석하고, 기술의 구성요소, 응용분야, 기술 동향에 관해서 소개하고, 또한 현재 한국생산기술연구원에 진행하고 있는 잉크젯 프린팅 기술 기반의 인쇄전자 분야에 관한 내용을 소개한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.3
• /
• pp.288-293
• /
• 2010

In these information-communication society, the wireless system technologies are increasing to do all things with wireless solution for fast and convenient works. This trend drives ubiquitous solutions which are based on broadband wireless network that gives network connection whenever, everywhere. This paper deals a bookshelf management system using plower line communication and RFID module. This system includes a 900 MHz RFID reader, Passive RFID-Tags, an Atmeg128 microprocessor board attached LED Display Module, and a management PC with GUI Software. This system works well in power line communication, tag reading and LED display, and PC Management Software.

• Journal of the Korean Geosynthetics Society
• /
• v.4 no.4
• /
• pp.23-37
• /
• 2005

The factors affecting the long-term design strength of geogrid can be classified into factors on creep deformation, installation damage, temperature, chemical degradation and biological degradation. Especially, creep deformation and installation damage are considered as main factors to determine the long-term design strength of geogrid. Current practice in the design of a reinforced soil structures is to calculate the long-term design strength of a geosynthetic reinforcement damaged during installation by multiplying the two partial safety factors, $RF_{ID}$ and $RF_{CR}$. This method assumes that there is no evaluation of synergy effect between installation damage and creep deformation of geogrids. This paper describes the results of a series of experimental study, which are carried out to assess the combined effect of the installation damage and the creep deformation for the long-term design strength of geogrid reinforcements. A series of field tests was carried out to assess installation damage of various geogrids with respect to different fill materials, and then creep tests are conducted to evaluate the creep deformation of both undamaged and damaged geogrids. The results indicated that the tensile strength reduction factors, RF, considering the combined effect between the installation damage and the creep deformation is less than that calculated by the current design method.

• KSBB Journal
• /
• v.21 no.6 s.101
• /
• pp.422-427
• /
• 2006

The culture media from Fomitopsis pinicola were extracted by methanol and examined growth inhibition against Helicobacter pylori. The culture media from 8 days fermentation of F. pinicola showed maximum inhibition activity on H. pylori in 0.25 mg as MIC value. The highest activity against H. pylori by MHCS agar diffusion medium by Fp-P1 in 22.7 mm ID among 3 peaks from methanol fraction of 8 days culture media of Fomitopsis pinicola which purified by ion-exchange chromatography. The Fp-P1 from DEAE-Sephadex A-25 have been analysed by TLC as Fp-T1, Fp-T2 and Fp-T3 by ninhydrin staining. Fp-T3 (Rf value : 0.67) was higher activity against H. pylori in 14.4 mm ID. Fp-T3 was identified as single band by HPLC and TLC. It was assumed to aminosugar by BioLC analysis and TLC staining.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.1
• /
• pp.38-46
• /
• 1999

o.25${\mu}m$ T-shaped gate P-HEMT is fabricated and used for design of X0band three stage monolithic microwave integrated circuit(MMIC) low noise amplifier(LNA). The fabricated P-HEMT exhibits an extrinsis transconductance of 400mS/mm and a drain current of 400mA/mm. The RF and noise characteristics show that the current gain cut off frequency is 65GHz and minimum noise figure(NFmin) of 0.7dB with an associated gain of 14.8dB at 9GHz. In the design of the three stage LNA, we have used the inductive series feedback circuit topology with the short stub. The effects of series feedback to the noise figure, the gain, and the stability have been investigated to find the optimal short stub length. The designed three staage LNA showed a gain of above 33dB, a noise figure of under 1.2dB, and ainput/output return loss of under 15dB and 14dB, respectively. The results show that the fabricated P-HEMT is very suitable for a X-band LNA with high gain.

• Analytical Science and Technology
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2006

The isotope dilution method was used for the determination of Br impurity in $1000{\mu}g/g$ Cl standard solution. Since relatively pure KCl salt was used for the preparation of the Cl standard solution, the Br impurity determination suffers from both spectral and non-spectral interferences due to the presence of a large amount of K and Cl matrices. AG2-X8 anion-exchange resin was employed to separate the Br analyte from the matrices, and RF power was raised to 1500 W and nebulizer gas flow rate was lowered to 0.77 L/min to reduce background from the $ArArH^+$ molecular ions. The Br impurity in the $1000{\mu}g/g$ Cl standard solution was determined to be 43.7 ng/g with the standard addition method. The analytical result was in good agreement with 41.2 ng/g (RSD 1.6%) determined by the isotope dilution method to lower uncertainty from poor reproducibility of the anion-exchange process.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.3
• /
• pp.175-184
• /
• 2009

We are entering into a era of enterprise computing that is characterized by an emphasis on broadband convergence, knowledge s haring, and calm services. Some people refer to this as the "ubiquitous" computing because its focus is on a high degree of connectivity between a company and its customers, suppliers, and channel partners. Ubiquitous computing technology, "RF" stands for "radio frequency"; the "ID" means "identifer". The tag itself of a computer chip and an antenna. The shortest metaphor is that RFID is like a bar-code but is read with an electromagnetic field rather than by a laser beam. Much has already been written about the use of RFID. But there is no has written about the use of RFID in the convention industry. Therefore this study have specific objectives as follows. 1. To give details on the use of RFID in convention. 2. To introduces the key concepts behind RFID technology. 3. To identify advantage & disadvantage of RFID technology using a BEXCO CASE study. 4. To study on ubiquitous convention using RFID and effective operation methods such as entrance identification system, session management, machine management, CRM management, visitor management, and contents management. This results provide into the current status of ubiquitous computing technology in convention industries. Specific advantages by using ubiquitous computing technology(RFID) are one-stop differentiate service, wireless internet service, use of visitor management system, entrance by tag, and U-logistics. On other side, disadvantages are security, stabilization of RFID system, higher price of RFID tag, and commercial scale. Convention by using of RFID technology is currently at an early stage. Convention company as BEXCO need to have the capabilities to adapt, to customize, to commercialize, and to modify technology to suit our circumstances.

• International journal of advanced smart convergence
• /
• v.5 no.3
• /
• pp.66-71
• /
• 2016

Smart building gate security control system using smartphone integrated with near field communication (NFC) has become part of daily life usage these days. The technology change in replacing RF NFC device using visible light communication technology based approach growing faster in recent days. This paper propose a design and development of gate security control system using color code based user authentication ID generation as part of an intelligent access control system to control automatic door open and close. In this approach gate security access control use the recent visible light communication technology trends to transfer the user specific authentication code to door access control system using color code on smartphone screen. Using a camera in the door access control system (ACS), color codes on smartphone screens are detected and matched to the database of authenticated user to open the door automatically in gate security system. We measure the visual light communication technology efficiency as a part of the research and the experiments have revealed that more than 95% users authenticated correctly at the suggested experiment environment on gate security control system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.183-188
• /
• 2017

This paper is for the a study on home healthcare system for a patient using SAW Tag. This system is useful when there's a patient in home. Many patients are wounded in restroom. But restroom is very private place and nobody want to be disturbed here. The place where the patient is most injured in the house is the toilet, and it is the point where the privacy of the individual should be kept and the patient's condition should be checked and cope with in case of emergency. And using saw tag, we can calculate position and ID through reflected rf signal. Therefore we propose a general home healthcare system. The management system utilized a seat bed system to monitor at-home patients. The system mounts a bio-signal measuring unit on a toilet seat, measures a bio-signal from the bio-signal measuring unit, and the measured bio-signal is transmitted to the main server through the user's smart phone. With proposed system, we can expand operation area to silver town where many patients are cared. In this paper we developed sensor system and saw tag positioning system and showed the result.

• Journal of Biosystems Engineering
• /
• v.37 no.6
• /
• pp.352-358
• /
• 2012

Purpose: The inexpensive black box system was developed to acquire and save driving information, to give the slope information, and to transmit SOS and theft signal. Method: The device consists of a main micro controller to acquire and save data, a GPS sensor module, a CDMA module, a touch LCD module, a RF (Radio Frequency) ID module, a SD (Secure Digital) card module, an emergency electric power source, a theftproof circuit, and a sensing device. The sensing device consists of a 8 bit micro controller, a accelerometer to detect impulse, two slope sensors to detect roll and pitch angle and a circuit to detect operation of 6 lighting devices. Results: Test results are as follows: 1) a tractor can be start up only with an electronic key (password or RFID card), 2) theft signal was transmitted when a tractor moved without an electronic key, 3) SOS was transmitted at conditions that rollover or crash happened. 4) 5 more than per 1s data are recorded at 5 minute intervals as new file name in SD card. Conclusions: This system can be used to save travelling record, reduce accident, prevent theft and rescue life in the accidents.