• 반도체디스플레이기술학회지
• /
• 제19권1호
• /
• pp.67-72
• /
• 2020

This study analyzes the method of adhesion and improvement between heat.er and RF filter in PE-CVD equipment through TRIZ method and proposes a solution. TRIZ Solution such as function analysis, 9-window matrix, ASIT, and Root cause analysis were used. The contact temperature between the heater and the RF filter was 20% and the surface temperature was lowered to 5.7℃, suggesting an improvement method for the thermal expansion of the PE-CVD equipment hot zone.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.246-249
• /
• 1997

Diamond thin films were deposited on Si wafer from a mixture of CE$_4$ and H$_2$ by RF Plasma CVD. The films were de77sited under the following conditions : discharge power of 500w, H$_2$ flow rate of 30sccm, chanter pressure of 20∼50Torr, and CH$_4$ concentration of 0.5∼2%. The deposition time was 30∼40 hours because of low growth rate. The deposited films were characterized by Scanning Electron Microscopy and X-ray Diffraction method.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1999년도 추계학술발표회 초록집
• /
• pp.36-36
• /
• 1999

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.296-300
• /
• 2002

Thin films of Hydrogenated amorphous carbon(a-C:H) are generally exhibited by high electrical resistivities from 10$^2$ to 10$\^$16/ Ω$.$cm, resulting in an interesting material for high power, high temperature MIS devices applications. The hydrogenated amorphous carbon(a-C:H) films were deposited on silicon and glass using an rf plasma enhanced CVD method. The resultant film properties were evaluated in the respect of material based on r.f. power variation. The hydrogenated amorphous carbon(a-C:H) films of thickness ranging from 30 to 50 m were deposited at the pressure of 1 ton with the mixture of methane and hydrogen. We have used rf-IR( courier transform IR) and AFM(Atomic force microscopy) for determining physical properties and current-voltage(I-V) measurement for electrical Properties.

• The Korean Journal of Ceramics
• /
• 제2권4호
• /
• pp.212-215
• /
• 1996

This paper focuses the strength and wear resistance of CVD diamond films. The strength of free-standing CVD diamond films synthesized by microwave plasm CVD, DC plasma CVD, RF plasma CVD and arc discharge plasma jet CVD has been measured by three-point bending test. The wear resistance of CVD diamod films has been evaluated by the pin-on-disk type testing. diamond films coated on the base of sintered tungsten carbide pin by hot filament CVD have been rubbed with a sintered diamond disk in muddy water. Volume removed wear of CVD diamond has been compared with stellite, WC alloy and bearing steel.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권2호
• /
• pp.49-56
• /
• 2001

Diamond thin films have been deposited on the silicon substrate by inductively coupled radio frequency plasma enhanced chemical vapor deposition system. The morphological features of thin films depending on methane concentration and deposition time have been studied by scanning electron microscopy and Raman spectroscopy. The diamond particles deposited uniformly on silicon substrate($10{\times}10[mm^2]$) at the pressure of 1[torr], a methane concentration of 1[%], a hydrogen flow rate of 60[sccm], a substrate temperature of $840\{sim}870[^{\circ}C]$, an input power of 1[kw], and a deposition time of 1[hour]. With increasing deposition time, the diamond particles grew, and than about 3 hours have passed, the graphitic phase carbon thin film with "cauliflower-like" morphology deposited on the diamond thin films.

• 조명전기설비학회논문지
• /
• 제28권9호
• /
• pp.45-51
• /
• 2014

This work carried out for the effective synthesis characteristics of graphene nanowall film by controlling the electric field in a RF plasma CVD process. For that, the bipolar bias voltage was applied to the substrate such as Si and glass materials for the best chemical reaction of positive and negative charges existing in the plasma. For supplying the seed formation sites on substrate and removing the oxidation layer on the substrate surface, the electron bombardment into substrates was performed by a positive few voltage in hydrogen plasma. After that, hydrocarbon film, which is not a graphene nanowall, was deposited on substrates under a negative bias voltage with hydrogen and methane gases. At this step, the film on substrates could not easily identify due to its transparent characteristics. However, the transparent film was easily changed into graphene nanowall by the final hydrogen plasma treatment process. The resultant raman spectra shows the existence of significant large 2D peaks corresponding to the graphene.

• 마이크로전자및패키징학회지
• /
• 제8권1호
• /
• pp.13-18
• /
• 2001

본 연구에서 RF 플라즈마를 이용한 촉매 화학기상증착법에 의하여 탄소나노튜브를 성장시켰다. 탄소나노튜브는 Ni이 증착된 강화 유리 기판위에 $600^{\circ}C$ 이하의 공정 온도에서 성장되었으며, 성장시 성장 온도와 에칭 시간 그리고 Ni 층의 두메에 따라 탄소나노튜브 성장 특성이 다양하게 나타났다. Ni이 증착된 강화 유리기판위에 탄소나노튜브를 성장시키기 위하여 에칭 가스로는 $H_2$와 $NH_3$가스를 사용하였고, 탄소 원료로 $C_2H_2$가스를 사용하였다. 수직 배향된 탄소나노튜브의 직경과 길이는 약 150 nm와 3 $\mu\textrm{m}$ 정도의 크기로 성장되었다. 촉매 화학기상증착법을 이용하여 성장된 탄소나노튜브는 FED의 에미터로 사용이 기대된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.149-150
• /
• 1989

Diamond thin films were synthesised from the mixed gases of $CH_4$ and $H_2$ on silicon substrate by R.F plasma CVD and films deposited were investigated by SEM. XRD and Raman spectroscope. From these result, cubo-octahedral diamond particles were synthesised under the following condition: methane concentration. 1.0vol% ; pressure of reactor, 0.3torr ; R.F power, 500W ; reaction time, 20hr.

• 한국재료학회지
• /
• 제2권6호
• /
• pp.443-451
• /
• 1992

반응성 스팟터법에 의하여 형성된 TiN막 표면상에 CVD 텅스텐막을 증착할 때 여러가지 전처리 실시에 따른 텅스덴의 핵 생성 양상의 변화를 비교 조사하였다. 먼저 Ar rf 스팟터에칭 전처리는 에칭 두께가 200A 이상일 때에는 잠복기와 증착속도를 증가시킨다. Ar 이온주입 전처리는 잠복기를 증가시켜 텅스텐의 핵 생성에는 불리한 효과를 나타내는 반면, 증착속도는 증가시킨다. 또한 Si$H_4$flushing 전처리는 TiN막 표면에서의 Si의 흡착을 용이하게 함으로써 잠복기를 약간 감소시키는 효과를 나타낸다.