• 제목/요약/키워드: RF transceiver system

검색결과 125건 처리시간 0.02초

로버스트 유무선 보안시스템을 위한 송수신 모듈의 설계 (A Design of Transceiver Module for Wire and Wireless Robust Security System)

  • 박성걸;이재민
    • 디지털콘텐츠학회 논문지
    • /
    • 제17권3호
    • /
    • pp.173-180
    • /
    • 2016
  • 본 논문에서는 종래의 보안관리 시스템과 송수신 모듈의 단점을 개선하기 위해 유무선 복합기능의 송수신 모듈과 이를 사용한 신뢰성 높은 실시간 보안시스템을 제안한다. 제안하는 복합 송수신모듈은 RF 제어 회로와 무선 송수신 회로로 구성된다. RF제어회로는 저전력 협대역 RF 송수신 시스템으로서 마이크로프로세서의 레지스터에 저장되어 있는 특정 주파수 대역을 불러올 수 있고, 임의로 값을 쓰거나 읽어 들여 임의 주파수의 송신출력을 사용자가 제어할 수 있도록 설계한다. RF 송신 모듈의 동작을 위한 구동 알고리듬을 제시하고 설계한 복합 송수신 모듈과 동작 알고리듬을 시작품으로 구현하여 실험을 통해 유효성을 확인한다.

임펄스 UWB 시스템을 위한 RF 송수신기 설계 (RF Transceiver Design for Impulse Radio UWB System)

  • 박주호;오미경;오정열;길민수;김재영
    • 대한임베디드공학회논문지
    • /
    • 제4권1호
    • /
    • pp.29-34
    • /
    • 2009
  • In this paper, we design RF transceiver architecture and building blocks for impulse radio UWB system. Impulse radio UWB signal occupies the wide frequency band which is very low transmission power. So, it can minimize the interference effect with the other system. Using UWB technology, we obtain position awareness service. Therefore, we describe the RF transceiver architecture of direct conversion receiver and define the requirement of RF transceiver. Moreover, we implement a prototype RF transceiver based on the presented standard and verify a function and performance through the wireless data communication and ranging test.

  • PDF

무선 LAN RF 송수신 시스템 분석 및 설계에 관한 연구 (A Study on the Analysis and Design of Wireless LAN RF Transceiver System)

  • 윤여송;김학선
    • 한국항행학회논문지
    • /
    • 제6권4호
    • /
    • pp.296-305
    • /
    • 2002
  • 본 논문에서는 IEEE Std 802.11b와 IEEE Std 802.11a의 규격집으로부터 RF 송수신 시스템의 설계를 위한 최소성능 요구 조건의 파라메터들을 제시하였으며, 이 파라메터들로부터 RF 송수신 시스템의 설계 과정에서 요구되어지는 최소성능 요구조건을 산출하였다. 그 산출된 값으로부터 RF 송수신 시스템을 구성하기 위한 최적의 조건을 갖는 부품을 선정하여 Agilent ADS로 시뮬레이션을 했다. 이러한 분석결과와 시뮬레이션 결과는 실제 무선 LAN 설계시 유용하게 사용될 수 있을 것이다.

  • PDF

Review on RF Performance of Ultra Wide Band Device

  • 이일규;강법주
    • 조명전기설비학회논문지
    • /
    • 제21권2호
    • /
    • pp.34-39
    • /
    • 2007
  • UWB(Ultra Wide Band) system for high speed and high accurate location has been studying actively. This paper presents the design and implementation of RF transceiver for DS-CDMA(Direct Sequence-Code Division Multiple Access) UWB device. Major components of RF transceiver such as Low Noise Amplifier(LNA) and Band Pass Filter(BPF) are designed and then fabricated to meet wideband characteristics. The RF transceiver was implemented by the use of the fabricated components and commercial devices after carrying out performance simulation. Through the performance evaluation of the UWB RF transceiver with W-CDMA signal, the approach of design, implementation and evaluation of RF transceiver which is available to DS-CDMA UWB system is verified.

무인항공기 가시선 데이터링크 Ku 대역 RF 송수신 시스템 설계 (Ku-Band RF Transceiver System Design for UAV Line-Of-Sight Datalink)

  • 최재원;김지훈
    • 전자공학회논문지
    • /
    • 제51권9호
    • /
    • pp.46-53
    • /
    • 2014
  • 본 논문에서는 무인항공기 가시선 데이터링크 Ku 대역 RF 송수신 시스템을 설계하였다. RF 송수신 시스템은 송수신반, RF 전단반, 고출력증폭반으로 구성되어 있다. 송수신반은 주파수 상/하향 변환 기능과 채널 변경 기능을 제공하며, RF 전단반은 송/수신 신호 이중화, 안테나 선택, 소신호 증폭, 수신신호 외 주파수 필터링 기능을 제공한다. 고출력증폭반은 Ku 대역 전력증폭과 송신출력 가변(고/중/저/Mute) 기능을 제공한다. 송수신반의 주파수 상/하향 변환은 슈퍼헤테로다인 방식으로 구현하였다. RF 송수신 시스템은 대용량 고속 데이터의 신뢰성 있는 송수신을 위하여 광대역 고선형 특성을 갖도록 설계하였다. 또한, 무인항공기 운용 환경에 따른 주파수의 선택적 사용을 위하여 채널 변경이 가능하도록 설계하였다.

A New Automatic Compensation Network for System-on-Chip Transceivers

  • Ryu, Jee-Youl;Noh, Seok-Ho
    • ETRI Journal
    • /
    • 제29권3호
    • /
    • pp.371-380
    • /
    • 2007
  • This paper proposes a new automatic compensation network (ACN) for a system-on-chip (SoC) transceiver. We built a 5 GHz low noise amplifier (LNA) with an on-chip ACN using 0.18 ${\mu}m$ SiGe technology. This network is extremely useful for today's radio frequency (RF) integrated circuit devices in a complete RF transceiver environment. The network comprises an RF design-for-testability (DFT) circuit, capacitor mirror banks, and a digital signal processor. The RF DFT circuit consists of a test amplifier and RF peak detectors. The RF DFT circuit helps the network to provide DC output voltages, which makes the compensation network automatic. The proposed technique utilizes output DC voltage measurements and these measured values are translated into the LNA specifications such as input impedance, gain, and noise figure using the developed mathematical equations. The ACN automatically adjusts the performance of the 5 GHz LNA with the processor in the SoC transceiver when the LNA goes out of the normal range of operation. The ACN compensates abnormal operation due to unusual thermal variation or unusual process variation. The ACN is simple, inexpensive and suitable for a complete RF transceiver environment.

  • PDF

Cognitive Radio 기술 기반의 TV Whitespace대역 WRAN 시스템의 RF 송.수신기 구현 (Implementation of a RF transceiver for WRAN System Using Cognitive Radio Technology in TV Whitespace Band)

  • 민준기;황성호;김기홍;박용운
    • 한국통신학회논문지
    • /
    • 제35권5A호
    • /
    • pp.496-503
    • /
    • 2010
  • 본 논문은 IEEE802.22 표준을 바탕으로 하는 무선인지(Cognitive Radio) 기반의 WRAN (Wireless Regional Area Network) 시스템의 RF 송 수신기 구현에 관한 것이다. 본 시스템 단말 구현에 있어 VHF/UHF (54~862MHz)의 광대역에서 동작하는 CMOS RF 송 수신기 IC는 이중경로 직접변환 구조를 가지고 광대역 특성에 따른 대역내 고조파를 효과적으로 억압하였다. 64QAM(3/4 coding rate) OFDM신호에 대해 -31.4dB(2.7%) 이하의 EVM 특성을 얻었으며 전체 칩의 사이즈는 12.95mm2 이다. 그리고 제안된 CMOS RF 송 수신기 IC는 TDD(Time Division Duplex) 모드의 WRAN 시스템 적용에 만족하는 우수한 성능을 얻었다.

Review on Performance Requirements, Design and Implementation of RF Transceiver for Mobile Communications

  • 이일규;류성렬;오승엽;홍헌진
    • 정보와 통신
    • /
    • 제24권3호
    • /
    • pp.76-86
    • /
    • 2007
  • This paper describes the RF performance issues of UE RF Transceiver for W-CDMA system based on 3GPP specifications. the parameters of transmitter and receiver are derived from the viewpoint of RF performance. In order for UE to achieve high performance, the transceiver performance requirements such as ACIR, EVM, Peak Code Domain Error, spectrum emission mask, frequency error stability and TX power control dynamic range for transmitter and reference sensitivity level, blocking characteristics, noise figure, ACS, linearity, AGC dynamic range for receiver are considered. On the basis of the required parameters, the UE RF transceiver is designed and then implemented. The evaluation of RF performance is accomplished through practical test scenarios.

Implementation of Filter Bank-Based RF Transceiver for TV White Space

  • Kang, Kyu-Min;Park, Jae Cheol;Park, Seungkeun
    • ETRI Journal
    • /
    • 제37권6호
    • /
    • pp.1077-1086
    • /
    • 2015
  • This paper presents a general-purpose design scheme of a filter bank (FB)-based radio frequency (RF) transceiver that operates across the entire ultra-high frequency (UHF) TV band from 470 MHz to 698 MHz and complies with the TV white space (TVWS) regulatory requirements. To this end, an intermediate frequency (IF) band-pass filter (BPF) with a sharp skirt characteristic is considered as a solution for handling the incoming signals from a baseband modem. Specifically, an FB-based BPF structure with four ceramic resonator filters that effectively rejects unwanted signals is proposed to extract a desired signal in the TV band. Achievable data rates of a cognitive radio system (CRS) employing the proposed FB-based RF transceiver at the application layer are investigated in both wired and wireless environments. The service coverage of the CRS network is measured according to several modulation and coding schemes (MCSs) of the CRS. The results show that the coverage of a wireless network in a nearly open area can be extended by more than 9.3 km in the TVWS. Experimental results also confirm that the proposed FB-based RF transceiver is adequate for utilization in TVWS applications.

Ku 대역 대용량 공용데이터링크용 RF 송수신기 설계 (Transceiver Design for Terminal Operating with Common Data Link on Ku-Band)

  • 정병구;서정원;류지호
    • 한국전자파학회논문지
    • /
    • 제26권11호
    • /
    • pp.978-984
    • /
    • 2015
  • 본 논문에서는 유무인항공기에서 사용될 통달거리 200 km, 전송속도 45 Mbps급 데이터 전송장비의 RF 송수신기에 대해 다룬다. RF 송수신기는 Ku 대역에서 동작하도록 설계되었으며, 상/하향 변환모듈, 고출력 증폭 모듈, 전단 처리 모듈로 구성된다. 제안된 RF 송수신기의 성능을 만족시키기 위해 출력신호 레벨이 10 W급인 전력 증폭기가 요구되었으며, 이는 GaN 소자기반의 전력증폭기로 구현되었다. 또한, 적응형 전송속도 변환기능이 요구되었고, 이를 위해 다양한 대역폭의 신호를 수신할 때의 상호 주파수 간섭을 최소화하기 위하여 6종의 SAW 필터로 구성된 수신기 구조가 적용되었다. 시스템 요구사항의 만족 여부를 확인하기 위해 AWR 시뮬레이션 툴을 이용하였다.