• ETRI Journal
• /
• 제42권3호
• /
• pp.333-340
• /
• 2020

We consider a hybrid combiner design for downlink massive multiple-input multiple-output systems when there is residual inter-user interference and each user is equipped with a limited number of radio frequency (RF) chains (less than the number of receive antennas). We propose a hybrid combiner that minimizes the mean-squared error (MSE) between the information symbols and the ones estimated with a constant amplitude constraint on the RF combiner. In the proposed scheme, an iterative alternating optimization method is utilized. At each iteration, one of the analog RF and digital baseband combining matrices is updated to minimize the MSE by fixing the other matrix without considering the constant amplitude constraint. Then, the other matrix is updated by changing the roles of the two matrices. Each element in the RF combining matrix is obtained from the phase component of the solution matrix of the optimization problem for the RF combining matrix. Simulation results show that the proposed scheme performs better than conventional matrix-decomposition schemes.

• 한국전기전자재료학회논문지
• /
• 제16권12S호
• /
• pp.1237-1241
• /
• 2003

In this paper, we report a novel RF-MEMS packaging technology with lightweight, small size, and short electric path length. To achieve this goal, we used the ultra thin silicon substrate as a packaging substrate. The via holes lot vortical feed-through were fabricated on the thin silicon wafer by wet chemical processing. Then, via holes were filled and micro-bumps were fabricated by electroplating. The packaged RF device has a reflection loss under 22 〔㏈〕 and a insertion loss of -0.04∼-0.08 〔㏈〕. These measurements show that we could package the RF device without loss and interference by using the vertical feed-through. Specially, with the ultra thin silicon wafer we can realize of a device package that has low-cost, lightweight and small size. Also, we can extend a 3-D packaging structure by stacking assembled thin packages.

• 한국항행학회논문지
• /
• 제16권2호
• /
• pp.219-226
• /
• 2012

3GPP의 LTE/LTE-Advanced 시스템은 OFDM(Orthogonal Frequency Division Multiplexing) 기술적용으로 주파수 할당에 의한 간섭분석 및 주파수 공유평가가 중요하다. 이에 본 논문에서는 LTE 두 사업자/시스템간의 인접채널 간섭 분석에 의한 주파수 공유연구를 수행하였다. 업링크 및 다운링크에서의 시스템 용량 및 스루풋(throughput) 손실에 대한 시뮬레이션 분석이 이루어져 5% 손실율의 주파수 공유기준으로 요구되는 ACIR(Adjacent Channel Interference Ratio) 값을 정의하였다. 유저(user)의 위치, 간섭 대역폭, 시스템 분리 옵셋(separation offset) 등의 파라미터들에 의해 주파수 공유를 위해 요구되는 ACIR 값에 미치는 영향이 분석되었으며, 이러한 결과 데이터 및 간섭분석 방법들은 향후 LTE RF 표준 및 주파수 유효이용에 참고자료로 활용될 것이다.

• 한국산업정보학회논문지
• /
• 제6권2호
• /
• pp.31-37
• /
• 2001

본 연구에서는 WLL 다중채널 수신단말기 RF-모듈을 제작하였다. 그리고 WLL 다중채널 RF-모듈의 실질적인 성능을 수신감도, 인접채널 선택도, 스퓨리어스 응답제한 등의 파라미터를 이용하여 평가하였다. 실제로 WLL 다중채널용 RF-모듈을 제작하여 측정한 결과, 입력전력이 -90 dBm에서 -30 dBm까지 변화할 때 -30 dBm의 일정한 출력전력이 유지되어 약 60 dB의 동작범위를 가졌다. WLL 단말기 RF 출력단의 통과대역내의 평탄도가 약 2 dB 이내를 유지하여 대역화산신호의 전력제어가 정확히 이루어지고 있음을 확인하였다. 그리고 WLL RF 수신 전단의 전송대역폭은 10 MHz으로 본 연구의 설계목표와 정확히 일치하였다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제3권4호
• /
• pp.240-245
• /
• 2014

How well the self-interference cancellation (SIC) technique performs is a primary issue in realizing an in-band full-duplex (FD) wireless communication system. One factor affecting its performance is channel estimation error on the self-interference channel. We propose a new analog SIC scheme which is robust to channel estimation error. It uses phase rotators in the radio frequency (RF) chain. We also derive closed-form equations for the residual self-interference of the proposed and the conventional schemes. The analytical and numerical results show that the residual self-interference under the proposed SIC scheme is less than that using the conventional scheme, even though channel estimation error is present.

• ETRI Journal
• /
• 제26권6호
• /
• pp.605-614
• /
• 2004

In this paper, we investigate array calibration algorithms to derive a further improved version for correcting antenna array errors and RF transceiver errors in CDMA smart antenna systems. The structure of a multi-channel RF transceiver with a digital calibration apparatus and its calibration techniques are presented, where we propose a new RF receiver calibration scheme to minimize interference of the calibration signal on the user signals. The calibration signal is injected into a multi-channel receiver through a calibration signal injector whose array response vector is controlled in order to have a low correlation with the antenna response vector of the receive signals. We suggest a model-based antenna array calibration to remove the antenna array errors including mutual coupling errors or to predict the element patterns from the array manifold measured at a small number of angles. Computer simulations and experiment results are shown to verify the calibration algorithms.

• 전자통신동향분석
• /
• 제21권6호통권102호
• /
• pp.202-211
• /
• 2006

본 논문에서는 2.4GHz 마그네트론을 이용하는 RF 전구에 대하여 동 대역을 사용하는IEEE 802.11b 기반의 무선랜과 전파간섭을 분석하였다. RF 전구가 무선랜에 미치는 전파간섭을 분석한 결과, LOS 환경(무선랜 수신전력 -63dBm/MHz)에서는 무선랜 채널 9, 10에 약 1~2Mbps의 전송속도 저하를 유발하였으며, Non-LOS 환경(무선랜 수신전력 -78dBm/MHz)에서는 무선랜 채널 6-11번에 통화절단 현상을 야기하였다. 그러나, RF 전구 수에 따른 간섭전력의 누적효과는 없는 것으로 나타났다.

• Carbon letters
• /
• 제13권1호
• /
• pp.17-22
• /
• 2012

Currently, graphene is a topic of very active research in fields from science to potential applications. For various radio-frequency (RF) circuit applications including low-noise amplifiers, the unique ambipolar nature of graphene field-effect transistors can be utilized for high-performance frequency multipliers, mixers and high-speed radiometers. Potential integration of graphene on Silicon substrates with complementary metal-oxide-semiconductor compatibility would also benefit future RF systems. The future success of the RF circuit applications depends on vertical and lateral scaling of graphene metal-oxide-semiconductor field-effect transistors to minimize parasitics and improve gate modulation efficiency in the channel. In this paper, we highlight recent progress in graphene materials, devices, and circuits for RF applications. For passive RF applications, we show its transparent electromagnetic shielding in Ku-band and transparent antenna, where its success depends on quality of materials. We also attempt to discuss future applications and challenges of graphene.

• ETRI Journal
• /
• 제37권4호
• /
• pp.647-656
• /
• 2015

This paper proposes a single-RF MIMO receiver that adopts a beam-switching antenna (BSA) instead of a conventional array antenna. The beauty of the proposed single-RF MIMO receiver with BSA is that it can be deployed in a very small physical space while achieving a full spatial multiplexing gain. Our analysis has revealed that the use of a BSA inevitably results in the spectrum spreading effect at the RF output, which in turn causes an SNR decrease and adjacent channel interference (ACI). Two novel receiver techniques are proposed to mitigate the issues of redundant sub-band suppression and ACI avoidance. Numerical analysis results verify the performance improvement from the proposed receiver techniques.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(5)
• /
• pp.113-116
• /
• 2000

In this paper presents the portable wireless ECG data detection and diagnosis system based on discreet wavelet transform. An algorithm based on wavelet transform suitable for real time implementation has been developed in order to detect ECG characteristics. In particular, QRS complex, S and T waves may be distinguished form noise, baseline drift or artifacts. Proposed telemetry system that a transmitting media using radio frequency(RF) for the middle range measurement of the physiological signals and receiving media using optical for electromagnetic interference problem. A standard hi-directional serial communication interface between the telemetry system and a personal computer or laptop, allows read-time controlling, diagnosing and monitoring of system. A portable telemetry system within a size. of 65${\times}$125${\times}$45mm consists of three parts: a digital signal processing part for physiological signal detect or diagnose, RF transmitter for data transfer and a optical receiver for command receive. Advantages of proposed telemetry system is wireless middle range(50m) FM transmission, reduce electromagnetic interference to a minimum. which enables a comfortable diagnosis system at home.