• Journal of Advanced Navigation Technology
• /
• v.12 no.6
• /
• pp.640-645
• /
• 2008

In progress to ubiquitous intelligent society, there are emerging technologies such smart wear related researches as wearable computer, smart fiber and smart fashion. In this paper, wearable 3D information acquisition device which improved both advanced in convenience and portable is implemented. 3D information input system is basically grouped of some modules; Gyro sensor for acquisition of 3D space coordinate, RF transmitter/receiver, and signal processing module etc. To testify the validity of designed system, some experiments are performed using lest board with respect to the communication distance, easiness of wearable and operation sensibility.

• Korean Journal of Psychosomatic Medicine
• /
• v.28 no.1
• /
• pp.1-7
• /
• 2020

Objectives : The purpose of this study was to explore comparison of clinical characteristics among Anxiety disorder, Depressive disorder, and Co-morbid of Anxiety disorder and Depressive disorder. Methods : Since January, 2017 to May, 2019, patients were recruited from the department of psychiatry of Hanyang University Guri Hospital. Participants were diagnosed Anxiety disorder, Depressive disorder, and Co-morbid of Anxiety disorder and Depressive disorder using DSM-5 criteria by board certified psychiatrists or clinical psychologists. And each of participants tested with MMPI-2 and clinical psychologists were converted MMPI-2 to MMPI-2-RF. The data were analyzed using SPSS 18.0. Results : The results indicated EID, RC2, HLP, SAV, and INTR-r were the highest in Co-morbid of Anxiety disorder and Depressive disorder group. And BXD, RC4, JCP, and AGGR-r were the highest in Depressive disorder group. Conclusions : The results indicated that Co-morbid of Anxiety disorder and Depressive disorder group were more severe internalizing dysfunction like lower positive emotion, helplessness, social avoidance and discomfort than single-diagnosed group. Single Depressive disorder group were more serious externalizing dysfunction like anger and aggression than single Anxiety disorder and Co-morbid of Anxiety disorder and Depressive disorder. The implications and limitations were discussed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.1
• /
• pp.61-70
• /
• 2008

This paper presents the flexible MEMS transmitter based on flexible printed circuit board or FPCB, which can be transformed to arbitrary shape. The FPCB is suitable to fabricate light weight and small size modules with the help of its thin thickness. Moreover a module based on FPCB can be attached on the arbitrary curved surface due to its flexible enough to be lolled up like paper. In this paper, the flexible MEMS transmitter integrated on FPCB for a short-distance sensor network which is based on orthogonal frequency division multiplexing(OFDM) communication system is proposed. The active device of the proposed flexible MEMS transmitter is fabricated on InGaP/GaAs HBT process which has been used for power amplifier design to take advantages of high linear and high efficient characteristics. Moreover, the passive devices such as the filter and signal lines are integrated and fabricated on the FPCB board. The performance of the fabricated flexible MEMS transmitter is analyzed with EVM characteristics of the output signal.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.4
• /
• pp.508-514
• /
• 2020

To implement the continuously evolving mobile communication standards such as Long Term Evolution (LTE) and 5G, the Software Defined Radio (SDR) concept provides great flexibility and efficiency. For many years, a high-end Digital Signal Processor (DSP) System on Chip (SoC) has been developed to support multicore and various hardware coprocessors. This paper introduces the implementation of the SDR platform hardware using TI's TCI663x chip. Using the platform, LTE transport channel is implemented by interworking multicore DSP with Bit rate Coprocessor (BCP) and Turbo Decoder Coprocessor (TCP) and the performance is evaluated according to various implementation options. In order to evaluate the performance of the implemented LTE transport channel, LTE base station system was constructed by combining FPGA main board for physical channels, SDR platform board, and RF & Antenna board.

• Aerospace Engineering and Technology
• /
• v.2 no.2
• /
• pp.167-178
• /
• 2003

The design on the Telemetry Ground System for launch of KSLV(Korea Space Launch Vehicle) in the korean Space center has been conducted in this study. For the optimized system design, first of all, the system deployment plan reflecting the topographic and geographic environments of the space center and launch vehicle characteristics has been developed. The RF link budget analysis for the maximum tracking range, requirement for receiving subsystem including antenna subsystem, requirement for data processing subsystem are also analyzed based on the On-Board Telemetry characteristics and launch vehicle parameters. Based on those analysis, telemetry ground system containing tracking/receiving subsystem, recording subsystem and data processing subsystem, timing subsystem, calibration subsystem and monitoring and control subsystem are designed. Futhermore, the analysis for the maximum permissible data latency and communication protocol between each telemetry station and control center are conducted and the entire system is designed so that the major telemetry parameters selected to the best quality are provided in real time to the control center(RCC, RSC) for the launch mission operation.

• Physical Therapy Rehabilitation Science
• /
• v.8 no.2
• /
• pp.61-66
• /
• 2019

Objective: The purpose of this study was to investigate the effects of resistance applied in various directions on lower extremity muscle activity and balance during squat exercise performance. Design: Cross-sectional study. Methods: Forty-one adults (19 males and 22 females) agreed to the study purpose and procedures. All subjects randomly performed squat exercises with an intensity of overcoming 10% of body weight resistance pulled forward, backward and general squats with $60^{\circ}$ of knee joint flexion. Electromyography was used to measure muscle activity of the vastus medialis oblique (VMO), rectus femoris (RF), vastus lateralis oblique (VLO), biceps femoris (BF), and semitendinosus (ST) muscles. The Wii Balance Board was used to assess balance during the three-method squat operation. Each operation was measured three times for 10 seconds. Results: There were significant differences in muscle activities of the VMO, RF, VLO, ST and balance ability with the application of three directions of resistance (p<0.05). Post hoc comparisons revealed that squats performed with resistance pulled in the backward direction resulted in higher VMO, RF and VLO activity than with the resistance placed in a pulled forward direction (p<0.05). In the ST, resistance applied in the pulled forward direction showed greater muscle activity compared to the pulled backward direction (p<0.05). With balance, squats performed with resistance pulled in the forward direction showed greater muscle activity than with resistance applied in the pulled backward direction and during general squat performance (p<0.05). Conclusions: In this study, squat exercises performed with resistance applied in the direction of pulling backwards was found to be the most effective in improving quadriceps muscle strength and balance. It is effective to provide resistance that is placed in the forward when it is difficult to perform a general squat due to weakness of the quadriceps.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1927-1929
• /
• 2004

현재 널리 쓰이는 고밀도 플라즈마 장치의 식각 시뮬레이션은 식각 패턴으로는 level set method이며 바이어스가 인가된 sheath model로는 Riley sheath model 이 보편적으로 받아들여지고 있다. 이러한 식각 시뮬레이션은 RF(Radio Frequency) sheath로부터 가속된 이온이 단위 입체각당 특정 지점에 이온 플럭스 분포함수, 이온 에너지 분포함수와, 중성종의 수송모델로 etch rate을 결정하는 과정과 level set method을 이용하여 식각 형태를 계산하는 과정으로 구성되어있다. 본 연구는 식각 형태 계산 이전의 단계로서 $Ar^+,\;Cl_2{^+},\;Cl^+$이온의 유동속도와 밀도를 장치의 radial방향으로 불균일하게 가정하였고, 가정한 값으로 이온 플럭스와 에너지 플럭스에 대한 영향을 알아보았다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.4
• /
• pp.283-291
• /
• 1994

This paper describes about the behavior of the Striped mullet (Mugil cephalus) in the setnet by telemetry techniques. The telemetry system consists of a pinger of 50KHz, three omni-directional hydrophones and ultrasonic receivers, a single board computer for the signal processing, two RF transceivers for the data comunication and a personnel computer. The fish tagged the pinger was tracked by the LBL method, and its location was calculated by the hyperbolic method. The fish escaped from sea surface to 7m deep right after release and had been swum near the sea surface after 30 minutes being released. Also, in horizontal movements, the fish stayed long time around the enterance of the square net in setnet, and showed the escaping behavior repeatly. The average speed of the fish was about 0.41m/sec(1.1 times of the body length)

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.4
• /
• pp.273-282
• /
• 1994

This paper describes about the behavior of the lseraeli carp (Cyprinus cartio. body length 43cm) and the Red seabream (Chrysophrys major. body length 35cm) aquacultured by telemetry techniques. The telemetry system consists of a pinger of 50kHz, three omni-directional hydrophones and ultrasonic receivers, a single board computer for the signal processing, two RF transceivers for the data communication, and a personnel computer. Those fish tagged the pingers were tracked by the LBL method, and its location was calculated by the hyperbolic method. The average speed of the lsraeli carp was about 1.0 times of the body length in a farming water tank (24$\times$24$\times$1m), and the Red seabream 1.3 times of the body length in a farming raft (10$\times$10$\times$5m). A variation of the speed of the lsraeli carp was higher than the other one.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.4
• /
• pp.263-272
• /
• 1994

The hardware and the software of the prototype telemtry system to monitor the behavior of the fish are designed. This system consistes of five parts I. e. three omni-directional hydrophones, three ultrasonic receivers, a single board computer for the signal processing, two RF transceivers for the data communication, and a personnel computer. The sensitivty of the hydrophones is -170dB(re 1V/$\mu$Pa), the gain and the 3dB receiving bandwidth of the ultrasonic receivers are 115dB and 1500Hz respectively, and the sampling period is 33.3$\mu$sec in the signal processing part. The positioning error of the system using hyperbolic method is estimated to be less than 0.2m in case that the pinger locates inside of the baselines. The perfomance of the system considering a practical use was examined by numerical simulation and a water tank test of a pinger tracking experiment. In results, the system developed in prototype was confirmed that it could be useful for monitoring the behavior of fish in the limited water area.