• Journal of Sensor Science and Technology
• /
• v.16 no.4
• /
• pp.247-253
• /
• 2007

Low power consumption sensor network platform (sensor node) for sensor networking with IEEE 802.15.4 protocol was fabricated. The sensor node used ceramic bar type antenna for increasing RF signal performance and decreasing PCB size occupied by antenna. The communication range of the fabricated sensor node was about $20{\sim}30$ m in open environment with 915 MHz frequency bandwidth and well supported by Tiny OS. The sensor node have good connectivity with various external devices by RS-232, I2C, analogue and digital expansion board, hence, this sensor node can be applied to various applications in wireless sensor network and ubiquitous sensor network.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.10
• /
• pp.805-811
• /
• 2000

Reliability of PBGA(plastic ball grid array) package is weak compared with normal plastic packages. The low reliability is caused by low resistance to the popcorn cracking, which is generated by moisture absorption in PCB(prited circuit board). In this paper, plasma treatment process was used and we analyzed its effects to interface adhesion. The contents of C and Cl decrease after plasma treatment but those of O, Ca, N relatively increase. The plasma treatment improves the adhesion between EMC(epoxy molding compound) and PCB(solder mask). The grade of improvement was over 100% Max, which depends on the properties of EMC. The RMS(root mean square) roughness value of the solder mask surface increases to plasma treatment. There is little difference of adhesion in RF power and treatment time.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.3
• /
• pp.901-908
• /
• 2000

Satellite communication in the 21 century's high tech information world is developing rapidly, marked by high levels of applications and functions. For example, satellite communication can process and switch the speed of the service provided by a broad and vast digital multimedia system such as a long-distance all between nations or broadcasting transfer service, which is supplied by a contemporary satellite system. So, it bring about problems which lack of satellite orbit and gibes out frequency resource by increment of satellite universally. To support this, an OBP satellite system is need, which includes an on-board IF/RF switch, baseband signal processing, multi-beam antenna technology, as well as a simple transponder system. In this paper, we have outlined the next generation of satellite communication; satellite OBP transport network architecture, which offers multimedia service and applied frequency reuse method for multi-spot beam. The satellite B-ISDN transport network architecture is also analyzed.

• Journal of the Korean Institute of Navigation
• /
• v.20 no.2
• /
• pp.97-107
• /
• 1996

The method of Electromagnetic Wave Immunity Test is continuously endeavored by IEC and CISPR as international unification, but it has not been established yet. The main reason is why it is difficult to obtain the measurement method and normalization of threshold to find out the complicated parameters for Electromagnetic Wave immunity Test. So far, thus, the Electromagnetic Wave Immunity Test is carried out case by case as the electromagnetic environment, which is set up Electromagnetic Wave Immunity Test. This study has developed an algorithm and measurement software suitable for IEC1000-4 Regulations, where a ready-made Amplifier, and Signal Generator have been used and an interconnecting Interface Board has been constructed for connecting with the other apparatuses, i.e., RF Switch, Power Meter, Field Sensor, Pre-Amp., etc. Therefore, we have achieved the aim to develop an automated software using OOP method and the measurement system.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1711-1712
• /
• 2007

액체탱크의 레벨을 정밀측정하는 데 FMCW(Frequency Modulated Continuous Wave)를 이용하고자 한다. 우리는 1GHz 대역폭으로 Sweep하는 Frequency Source Module을 개발하여 테스트 중이다. 개발한 송수신 모듈은 주파수의 송수신을 위한 주요부품들로 구성되는데, VCO(Voltage Controlled Oscillator), 서큘레이터(Circulator), 필터(Filter), 전력분배기(Power Divider), PLL(Phase Locked Loop)제어부, 믹서, 증폭기 등이 그것이다. 이들 부품들이 위치한 RF Board와, 패치로 구성한 안테나를 이용하여 마이크로웨이브 신호를 송수신할 수 있으며, 송수신한 신호 간의 차주파수(beat frequency)성분을 측정하면 거리정보를 획득할 수 있다. 차주파수의 아날로그신호는 DSP를 이용하여 FFT를 수행하여 주파수 성분을 찾아 거리계산을 하도록 개발하였다. 거리 측정의 성능에 영향을 미치는 가장 큰 요소는 안정된 주파수를 만들어 낼 수 있느냐 하는 것이다. 본 논문에서는 제작한 VCO 모듈을 비롯한 개발 중인 각 모듈들을 소개하였다. 향후 VCO의 선형성 개선과, 난반사에 대한 Echo Cancel 알고리듬을 적용하여 제품의 상용화를 목표로 한다.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.3
• /
• pp.192-199
• /
• 2009

This study was carried out to investigate the performance of a radio-frequency/vacuum dryer combined with a mechanical compressive load (RF/VC) with a scale of about $3m^3$ during drying board of Azobe (Lophira alata) and Korean red pine (Pinus densiflora). The degree of vacuum of the RF/VC system was maintained at 80~105 torr, and wood temperature was increased from $40^{\circ}C$ at the beginning of drying to $60^{\circ}C$ at the end of drying and the radiofrequency generator was operated with schedule of 7 minute-ON and 3 minute-OFF. The wood temperatures near charge plate always remained higher than those of the control during all of the drying stage, whereas the wood temperature near ground plate always remained lower than those of the controlled. As drying time proceeding, the temperature of the wood near ground plate presented lower than those of the control. Whereas the temperature of the wood near charge plate presented higher than those of the controlled. The final average moisture contents of the Azobe boards stacked near the input side of the RF generator showed slightly lower than those near the opposite side. Those of the wood stacked in the layers near the charge plate were lower than those of near the ground plate. The average length of surface checks of the Azobe boards stacked near the charge plate was very slight, whereas that toward the ground plate represented high values. The efficiency of input energy was simliar with the commercial systems.

• Korean Journal of Remote Sensing
• /
• v.23 no.2
• /
• pp.137-144
• /
• 2007

In KORDI (Korea Ocean Research and Development Institute), the KOSC (Korea Ocean Satellite Center) construction project is being prepared for acquisition, processing and distribution of sensor data via L-band from GOCI (Geostationary Ocean Color Imager) instrument which is loaded on COMS (Communication, Ocean and Meteorological Satellite); it will be launched in 2008. Ansan (the headquarter of KORDI) has been selected for the location of KOSC between 5 proposed sites, because it has the best condition to receive radio wave. The data acquisition system is classified into antenna and RF. Antenna is designed to be $\phi$ 9m cassegrain antenna which has 19.35 G/T$(dB/^{\circ}K)$ at 1.67GHz. RF module is divided into LNA (low noise amplifier) and down converter, those are designed to send only horizontal polarization to modem. The existing building is re-designed and arranged for the KOSC operation concept; computing room, board of electricity, data processing room, operation room. Hardware and network facilities have been designed to adapt for efficiency of each functions. The distribution system which is one of the most important systems will be constructed mainly on the internet. and it is also being considered constructing outer data distribution system as a web hosting service for offering received data to user less than an hour.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.6
• /
• pp.457-465
• /
• 2014

This paper introduces a test bed for communication protocol schemes of underwater acoustic sensor network, and also shows experimental results obtained from the test bed. As a testing protocol, carrier sense multiple access/collision avoidance (CSMA/CA) is evaluated on underwater acoustic channel. A sensor node is equipped with a DSP control board of ATmega2560 and a commercial underwater modem produced by Benthos. The control board not only manipulates a GPS signal to acquire the information of location and time, but also controls the underwater modem to operate according to the procedure designed for a given testing protocol. Whenever any event takes place such as exchanging control/data packets between underwater modems and acquiring location and timing information, each sensor node reports them through radio frequency (RF) air interface to a central station located on the ground. The four kinds of packets for CSMA/CA, RTS(Request To Send), CTS(Clear to Send), DATA, ACK(Acknowledgement) are designed according to the underwater communication environment and are analyzed through the lake experiment from the point of feasibility of CSMA/CA in underwater acoustic communications.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.9-18
• /
• 2004

This study was carried out to find the efficient methods for preventing resin exudation from spruce board during high temperature environment service.In the dry-air oven test, in-use temperature related to resin exudation of 110℃ could be obtained by the appropriate kiln drying without any special treatment, and the in-use temperature of the radio-frequency/vacuum (RF/V)-dried boards was about 20℃ higher than that of the conventional kiln-dried boards.In the autoclave test, resin exudation was not found from any board dried in the conventional kiln and in the RF/V kiln after the low pressure steam explosion (SE) treating, while for the control resin exudations were more severe in the autoclave test above 130℃ than in the dry-air oven test. It, therefore, would be suggested that resin exudation during high temperature service condition can be prevented more effectively by super-heated steaming green boards than by high-temperature drying boards with low moisture.

• Korean Journal of Psychosomatic Medicine
• /
• v.28 no.1
• /
• pp.8-19
• /
• 2020

Objectives : The purpose of this study was to examine whether the MMPI-2-RF serves as a useful tool to differentiate between the subtypes of high risk of suicide among psychiatric outpatients. Methods : Patients were recruited from the department of psychiatry of university hospital. Participants were diagnosed using DSM-5 criteria by board certified psychiatrists. Their medical records were reviewed retrospectively. And participants were put into 4 groups (Suicide ideation, Suicide attempt, Non-suicidal self-injury, and general psychiatric diagnosis as a control group). For statistical comparison, the MANCOVA with gender as a covariate was used. Results : The results indicated that as previous research with non-clinical sample suggested, psychiatric outpatients with high suicide risk also have significantly higher Emotional/Internalizing Dysfunction, Helplessness/Hopelessness, Suicidal/Death Ideation, Demoralization, Cognitive complaints, Cynicism, Dysfunctional negative thoughts than general psychiatric patients group. But group differences within the high suicide risk patients have not been observed. However, suicide attempt group and NSSI group has higher Behavioral/Externalizing Dysfunction, RC4, AGG than general psychiatric patients group. But there was no difference between suicidal idea group and general psychiatric patients group. Conclusions : There was no group difference observed between all three subtypes, which mean the MMPI2-RF may not be the useful diagnostic tool to navigate high suicide risk subtypes. Even though there was no difference observed in the suicide ideation group, suicide attempt group and NSSI group have higher aggression and externalization. So those indexes could serve as a useful marker to investigate riskiness of suicide related symptoms.