• 한국광학회지
• /
• 제15권4호
• /
• pp.349-354
• /
• 2004

XFP(10 Gb/s Small Form Factor Pluggable) 트랜시버 모듈에 사용되는 광송신 서브어셈블리(TOSA: Transmitter Optical Sub-assembly)를 열적, 전기적 측면에서 설계, 제작 및 평가하였다. 저가격이며 소형인 TOSA를 제작하기 위해서 바이어스 티 및 정합저항등을 AlN서브마운트 위에 집적하였다. 10 Gb/s의 초고속 전기 신호의 입력을 위해 CPW형 마이크로파 전송로를 스템 구조체내에 도입하였다. 소자의 전기적 특성 분석을 위해 서브마운트내에 실장되는 각종 전기광학 부품들과 스템 구조체들을 고속회로 모델링 하였다. 제작한 TOSA의 특성평가를 통해, 85$^{\circ}C$에서 11 GHz 이상의 -3 dB 대역폭을 얻을 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제7권4호
• /
• pp.570-575
• /
• 2012

In a wireless communication RF transmitter, the output of a quadrature modulator (QM) is distorted by not only the linear imperfection features such as in/quadrature-phase (I/Q) input gain imbalance, local phase imbalance, and local gain imbalance but also the nonlinear imperfection features such as direct current (DC) offset and mixer nonlinearity related to in-band spurious signal. In this paper, we propose the unified QM model to analyze the combined effects of the linear and nonlinear imperfection features on the performance of the QM. The unified QM model consists of two identical nonlinear systems and modified I/Q inputs based on the two-port nonlinear mixer model. The unified QM model shows that the output signals can be expressed by mixer circuit parameters such as intercept point and gain as well as the imperfection features. The proposed approach is validated by not only simulation but also measurement.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1391-1392
• /
• 2008

The modulation quality of the I/Q modulator in a wireless transmitter usually affects system performance and it mostly depends on both a nonlinearity and a distortion, from the third order intermodulation(IM3) signal and the imperfection features such as an input amplitude error and a local phase error, respectively. This paper focused on how much the Single Sideband Ratio(SSR), which indicates the signal distortion, changes according to the variation of the imperfection features. Since a desired signal, side band and IM3 signals at the I/Q modulator output are also represented with those power series coefficients and the imperfection features, the effects of the imperfection features on SSR can be clearly analyzed.

• International journal of advanced smart convergence
• /
• 제11권4호
• /
• pp.41-46
• /
• 2022

This study is a Ku-band array antenna for the manufacture of low-orbit satellite communication terminals, designed to have miniaturization, high gain, and wide beam width. The transmission of low-orbit satellite communication has a right-rotating circularly polarized wave, and the reception has a left-rotating circularly polarized wave. The 4×8 array antenna was separated for transmission and reception, and it was combined with the RF circuit part of the transmitter and receiver, and was terminated in the form of a waveguide for RF signal impedance matching in the form of a transition from the microstrip line to the waveguide. The 30° beam width of the receiver maximum gain of 19 dBi and the 29° beam width of the transmitter maximum gain of 18 dBi are shown. Through this antenna configuration, the system was configured to suit the low-orbit satellite transmission/reception characteristics.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.402-403
• /
• 2011

본 논문에서는 LTE-Advanced 시스템에 적용할 수 있는 $0.13-{\mu}m$ CMOS RF Front-end 송신기를 제안한다. 제안하는 RF Front-end 송신기는 3GPP의 E-UTRA Band 7 주파수인 2500 ~ 2570 MHz 대역을 지원하며 +10 dBm의 출력 P1dB 특성을 가지고, 실제 동작에서는 +0 dBm 출력 전력을 제공한다. 회로의 성능은 레이아웃 후 Post Layout Simulation을 통해 검증하였으며, +0 dBm 출력 시 1.2 V의 공급 전압원으로부터 상향주파수변환기는 14 mA, 그리고 구동증폭기는 28 mA를 소모한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1666-1668
• /
• 2004

By wireless transmission data, there is high possibility to get distortion and lose by noise and barrier on wireless. If the data check damaged and lost at receiver, can't make it clear and can't judge whether this data is right or not. Therefore, by wireless transmission data need the data error check algorithm in order to decrease the data's distortion and lose and to monitoring the transmission data as real time. This study consists of RF station for wireless transmission, Water Level Meter station for water level measurement and Error check algorithm for error check of transmission data. This study is also that investigation and search for error check algorithm in order to wireless digital data transmission in condition of the least data's damage and lose. Designed transmitter and receiver with one - chip micro process to protect to swell the volume of circuit. Had designed RF transmitter - receiver station simply by means of ATMEL one - chip micro process in the systems. Used 10mW of the best RF power and 448MHz-449MHz on frequency band which can get permission to use by Frequency Law made by Korean government

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.993-997
• /
• 2004

A data error inspection algorithm for wireless digital data communication was developed. Original data converted By wireless digital data error inspection algorithm. Wireless digital data is high possibility to get distortion and lose by noise and barrier on wireless. If the data check damaged and lost at receiver, can't make it clear and can't judge whether this data is right or not. Therefore, by wireless transmission data need the data error inspection algorithm in order to decrease the data distortion and lose and to monitoring the transmission data as real time. This study consists of RF station for wireless transmission, Water Level Meter station for water level measurement and Error inspection algorithm for error check of transmission data. This study is also that investigation and search for error inspection algorithm in order to wireless digital data transmission in condition of the least data's damage and lose. Designed transmitter and receiver with one - chip micro process to protect to swell the volume of circuit. Had designed RF transmitter - receiver station simply by means of ATMEL one - chip micro processing the systems. Used 10mW of the best RF power and 448MHz-449MHz on frequency band which is open to public touse free within the limited power.

• Journal of Communications and Networks
• /
• 제18권3호
• /
• pp.340-350
• /
• 2016

The performance of large-scale cognitive radio (CR) networks with secondary users sustained by opportunistically harvesting radio-frequency (RF) energy from nearby primary transmissions is investigated. Using an advanced RF energy harvester, a secondary user is assumed to be able to collect ambient primary RF energy as long as it lies inside the harvesting zone of an active primary transmitter (PT). A variable power (VP) transmission mode is proposed, and an energy-based opportunistic spectrum access (OSA) strategy is considered, under which a secondary transmitter (ST) is allowed to transmit only if its harvested energy is larger than a predefined transmission threshold and it is outside the guard zones of all active PTs. The transmission probability of the STs is derived. The outage probabilities and the throughputs of the primary and the secondary networks, respectively, are characterized. Compared with prior work, the throughput can be increased by as much as 29%. The energy-based OSA strategy can be generally applied to a non-CR setup, where distributed power beacons (PBs) are deployed to power coexisting wireless signal transmitters (WSTs) in a wireless powered sensor network.

• ETRI Journal
• /
• 제46권2호
• /
• pp.323-332
• /
• 2024

Receiver and transmitter monolithic microwave integrated circuit (MMIC) multifunction chips (MFCs) for active phased-array antennas for Ka-band satellite communication (SATCOM) terminals have been designed and fabricated using a 0.15-㎛ GaAs pseudomorphic high-electron mobility transistor (pHEMT) process. The MFCs consist of four-channel radio frequency (RF) paths and a 4:1 combiner. Each channel provides several functions such as signal amplification, 6-bit phase shifting, and 5-bit attenuation with a 44-bit serial-to-parallel converter (SPC). RF pads are implemented on the bottom side of the chip to remove the parasitic inductance induced by wire bonding. The area of the fabricated chips is 5.2 mm × 4.2 mm. The receiver chip exhibits a gain of 18 dB and a noise figure of 2.0 dB over a frequency range from 17 GHz to 21 GHz with a low direct current (DC) power of 0.36 W. The transmitter chip provides a gain of 20 dB and a 1-dB gain compression point (P1dB) of 18.4 dBm over a frequency range from 28 GHz to 31 GHz with a low DC power of 0.85 W. The P1dB can be increased to 20.6 dBm at a higher bias of +4.5 V.

• 한국전자파학회논문지
• /
• 제25권4호
• /
• pp.393-400
• /
• 2014

본 논문에서는 Ka 대역에서 정지 궤도 위성과 통신이 가능한 지상 단말 송신기를 미국 국방부에서 권고하는 MILSTD-188-164A 규격을 준수하도록 설계하였다. 설계된 송신기의 안테나는 이중 옵셋 그레고리안 반사판 형상을 사용하여 코러게이트 급전혼, 주름형 편파기와 직교 모드 변환기로 구성하였고, 해당 규격의 방사 패턴과 ESD 패턴, 축비 규격을 만족하도록 설계되었다. 설계된 송신기의 RF부는 Ka 대역으로 주파수를 상향 변환해 주는 상향 변환반과 병렬 구조의 pHEMT MMIC 소자를 이용하여 소형/저전력/경량의 고출력 특성을 갖는 고출력 증폭반으로 해당 규격의 VSWR, 불요파/고조파 억압, 출력평탄도 및 위상 잡음 등의 사양을 만족하도록 설계되었다.