• 한국전기전자재료학회논문지
• /
• 제25권6호
• /
• pp.439-444
• /
• 2012

For the application of photo-detector as active layer, we have studied how to deposit SiGe thin film using an independent Si target and Ge target, respectively. Both targets were synthesized by purity of 99.999%. Plasma generators were generated by radio frequency (rf, 13.56 MHz) and direct current (dc) power. When Ge and Si targets were sputtered by dc and rf power, respectively, we could observe the growth of highly crystalline Ge thin film at the temperature of $400^{\circ}C$ from the result of raman spectroscopy and X-ray diffraction method. However, SiGe thin film did not deposit above method. Inversely, we changed target position like that Ge and Si targets were sputtered by rf and dc power, respectively. Although Ge crystalline growth without Si target sputtering deteriorated considerably, the growth of SiGe thin film was observed with increase of Si dc power. SiGe thin film was evaluated as microcrystalline phase which included (111) and (220) plane by X-ray diffraction method.

• 대한전자공학회논문지TC
• /
• 제44권6호
• /
• pp.31-39
• /
• 2007

본 논문에서는 코드분할다중접속방식을 사용하는 이동통신 시스템에서 기지국의 순방향 송신전력 및 파일롯 전력 등 RF 파라미터를 실시가 또는 주기적으로 측정하여 분석함으로써 시스템의 장애를 미연에 방지하고 셀커버리지 확대, 가입자 수용용량 증가 등 최적의 서비스 품질을 확보하고 투자효율을 극대화하기 위한 방안을 제시하였다. 순방향 전력 측정에서는 디텍터 내의 국부발진기 주파수를 가변함으로써 모든 채널의 송신출력을 측정할 수 있도록 하였다. 채널전력의 측정에 의하여 통화량 증가에 따른 송신출력의 변화를 관찰할 수 있으며, 순방향 $E_c/I_o$ 와의 비교를 통하여 파일롯 채널의 전력을 유추함으로써 대전력증폭기 등 송신부 모듈의 열화를 판독할 수 있도록 하였다. 일련의 모든 측정에는 CDMA 레벨디텍터에 의한 정밀 계측에 이은 정확한 분석이 이루어져야 하므로 변조방식 차이에서 오는 Crest factor 가 상이함으로 인한 측정상의 오차를 극복할 수 있도록 설계하였다.

• 전기학회논문지
• /
• 제57권6호
• /
• pp.1032-1035
• /
• 2008

In this paper, a DC power management scheme is proposed for efficient battery operation of 60-GHz receivers. It consists of a rectenna and a zero-cross detector. The harmonic rejection capability of a circular sector antenna is used to simplify the rectenna. The zero-cross detector is introduced to increase sensitivity. When the received power density is larger than 0.013 $mW/cm^2$, it can generate enough DC power to activate an RF receiver. Experimental data is used to verify the proposed idea.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1239-1241
• /
• 2001

This research addresses a new vehicle detecting scheme which uses MR(Megneto Resistive) sensor. A vehicle detector which includes two MR sensors for detecting car presence and speed, sensor voltage amplifiers, signal processor, microprocessor, RF data transceiver and a simple car moving simulator is constructed. From experimental results with the vehicle detector the proposed vehicle detecting scheme was verified.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.776-779
• /
• 2004

A RF front-end module is designed for GIS(Gas Insulated Substation) which is employed for effective and efficient very high voltage transmission. Major advantage of the unit is improved PO detection sensitivity through minimizing the effect of surrounding interference signals, which is achieved by controlling the gain and the selection of the frequency band, for the precise detection of any UHF PO (Partial Discharge) disturbance occurred in the GIS due to some unwanted problems. For the development of the module, various switches for providing selected signal paths, wideband LNA, 3 BPF for selecting detection frequency band, and video detector are designed, fabricated and measured on 1 mm FR4 substrate with various RF components. The detection sensitivity of the unit was <-60 dBm that is sufficient to detect UHF PO signals as low as 1 pC. It is believed that the value is enough to detect the signal occurred in GIS.

• 한국초전도ㆍ저온공학회논문지
• /
• 제16권4호
• /
• pp.1-6
• /
• 2014

Superconducting quantum interference device (SQUID) is a sensitive detector of magnetic flux signals. Up to now, the main application of SQUIDs has been measurements of magnetic flux signals in the frequency range from near DC to several MHz. Recently, cryogenic low-noise radio-frequency (RF) amplifiers based on DC SQUID are under development aiming to detect RF signals with sensitivity approaching quantum limit. In this paper, we review the recent progress of cryogenic low-noise RF amplifiers based on SQUID technology.

• 한국약용작물학회지
• /
• 제9권1호
• /
• pp.21-25
• /
• 2001

인삼의 주종 사포닌인 7종 사포닌($Rb_1,\;Rb_2,\;Rc,\;Rd,\;Re,\;Rf\;and\;Rg_1$)을 고속액체크로마토그라피로 분석하는 일반적인 방법인 순상 column에서 $Rg_1$, Re 및 Rf가 명확히 분리되지 않는 문제점을 개선하기위하여 본 연구를 수행하였다. 고속액체크로마토그라피를 이웅하여 역상 ${\mu}{\beta}ondapak$ ODS컬럼으로 인삼중 주종 사포닌인 7종 ginsenosides $Rg_{1},\;Re,\;Rf,\;Rb_{1},\;RC,\;Rb_{2}$ 및 Rd를 양호하게 분리하였다. 이때 분석 조건으로 이동상 용매 조성은 (A) $H_{2}O$, (B) methyl cyanaide을 (A) 90/(B) 10에서 (A) 0/(B) 100으로 기울기 용리를 이용하였으며, 기울기 용리 제어장치를 사용하여 용리시켰다. 용매 흐름속도는 1.5ml/min, 검출기는 UV detector(203nm)이었다. 이 방법은 분리능과 재현성 및 회수율이 양호하므로, 앞으로 인삼중 ginsenosides 분석에 응용될 수 있을 것으로 사료된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1712-1714
• /
• 2001

This paper deals with the development and application of an inner corrosion detector for the ACSR(Aluminum Conductor Steel Reinforced) power lines. The detector runs on an ACSR power line and inspects the inner corrosion of the conductor using the technology of the nondestructive eddy current test. It is consists of an ECT sensor, signal processing units, a RF transmitter/receiver, and etc.. The experimental result through field tests shows the detector can efficiently find both the zinc and aluminum loss of ACSR power lines.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2371-2373
• /
• 1999

This paper deals with the development, reliability, specification and performances of the ACSR inner corrosion detector system. It is designed to run on ACSR automatically and to inspect the corrosion of the line with on-line continuously. And it comprises a sensor a constant current source, a signal processing unit, a RF transmitter and receiver unit. Also separable encircling coil sensor is proposed in order to detect inner corrosion of the overhead ground wires. In conclusion, this detector can realize the nondestructive detecting of an ACSR inner corrosion.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1963-1965
• /
• 2000

This paper deals with a problem of detecting the inner corrosion of the ACSR(Aluminum Conductor Steel Reinforced) power lines using a detector which consists of an ECT(Eddy Current Test) sensor, a constant current service, a signal processing unit, and a RF transmitter/receiver unit. The detector runs on the ACSR transmission line and inspects the corrosion of the conductor using the technic of the nondestructive eddy current test. The experimental result shows this detector can efficiently find the zinc loss in ACSR power lines.