• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.8
• /
• pp.1424-1433
• /
• 2007

In this paper, we propose a hardware architecture to generate digital hologram using the modified CGH (Computer Generated Hologram) algorithm for hardware implementation and design to FPGA (Field Programmable Gate Array) platform. After analyzing the CGH algorithm, we propose an architecture of CGH cell which efficiently products digital hologram, and design CGH Kernel from configuring CGH Cell. Finally we implement CGH Processor using CGH Kernel, SDRAM Controller, DMA, etc. Performance of the proposed hardware can be proportionally increased through simply addition of CGH Cell in CGH Kernel, since a CGH Cell has operational independency. The proposed hardware was implemented using XC2VP70 FPGA of Xilinx and was stably operated in 200MHz clock frequency. It take 0.205 second for generating $1,280{\times}1,024$ digital hologram from 3 dimensional object which has 40,000 light sources.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.487-490
• /
• 2003

In this research, we will devise an obstacle avoidance algorithm for a previously unmanned vehicle. Whole systems consist mainly of the vehicle system and the control system. The two systems are separated; this system can communicate with the vehicle system and the control system through wireless RF (Radio Frequency) modules. These modules use wireless communication. And the vehicle system is operated on PIC Micro Controller. Obstacle avoidance method for unmanned vehicle is based on the Virtual Force Field (VFF) method. An obstacle exerts repulsive forces and the lane center point applies an attractive force to the unmanned vehicle. A resultant force vector, comprising of the sum of a target directed attractive force and repulsive forces from an obstacle, is calculated for a given unmanned vehicle position. With resultant force acting on the unmanned vehicle, the vehicle's new driving direction is calculated, the vehicle makes steering adjustments, and this algorithm is repeated.

• Journal of Broadcast Engineering
• /
• v.18 no.3
• /
• pp.491-494
• /
• 2013

This paper proposes a stochastic/dynamic routing protocol which aims the minimization of the summation of time average expected power expenditure with buffer stability in mobile ad-hoc 60 GHz wireless networks. By using 60 GHz RF, the wireless devices can transmit/receive 1080p HD video signals without compression. In addition, our algorithm works without centralized controller, so that the distributed operation is available. The novelty of the proposed algorithm was also verified by simulations.

• ETRI Journal
• /
• v.32 no.5
• /
• pp.827-830
• /
• 2010

For an adaptive cruise control (ACC) stop-and-go system in automotive applications, three radar sensors are needed because two 24 GHz short range radars are used for object detection in an adjacent lane, and one 77 GHz long-range radar is used for object detection in the center lane. In this letter, we propose a single sensor-based 24 GHz radar with a detection capability of up to 150 m and ${\pm}30^{\circ}$ for an ACC stop-and-go system. The developed radar is highly integrated with a high gain patch antenna, four channel receivers with GaAs RF ICs, and back-end processing board with subspace based digital beam forming algorithm.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10d
• /
• pp.619-624
• /
• 2007

향상된 성능의 3 세대 무선 인터넷 서비스를 제공하기 위해 등장한 IEEE 802.16 표준은 VoIP를 적용 할 수 있는 QoS 기능을 규정하고 있으며 WiMAX 포럼의 장비 제조사들은 저마다의 scheduling 기법 구현을 통해 WiMAX 네트워크에서 voice service가 가능하도록 장비를 설계하고 있다. 그럼에도 불구하고, WiMAX 무선 구간에서 사용되는 MAC header는 제한된 RF 자원의 사용에 부담을 주고 있으며, BS(base station)와 BSC(BS controller)간에 사용되는 tunneling protocol의 헤더 역시 VoIP packet에 붙게 되어 대역폭의 비효율화를 초래한다. 유선상에서의 overheader는 저렴한 Gigabit Ethernet 링크를 사용하면 대역폭이 충분히 커지므로 별 문제가 되지 않지만 무선 상의 overheader는 반드시 줄여져야만 효율적인 무선 자원 이용 및 voice quality의 향상을 가져올 수 있다. 따라서 본 연구에서는 지금까지 제안된 IP/UDP/RTP 헤더 압축 기법 및 WiMAX MAC header 압축 기법을 분석하여, 무선 구간 WiMAX 네트워크에서 VoIP 서비스를 효율적으로 제공할 수 있는 방안을 제시하고자 한다.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.10
• /
• pp.8-17
• /
• 1995

Recently, in a variety of the application fields, it is interested in GPS receiver as the use of GPS(Global Positioning System) is increased. In this paer, we propose that a type of new receiver of a simple structure as GPS data receiver. This proposed receiver consists of RF stage, local C/A(Coarse/Acquisition) code generator, C/A code correlator, data demodulator and microprocessor controller as a GPS single channel data receiver using the L1 carrier . It is confirmed that the proposed receiver operates well as GPS raw data receiver through experiment.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.232-235
• /
• 2000

Design and experiments of a nondestructive system to inspect deterioration of ACSR-OC (ACSR Outdoor Cross-linked Polyethylene Insulated Wire usually used in HV overhead distribution lines presented in this paper. ACSR-OC conductor built to pollutants air for a long period would be easily progress to corrode so that it may lead to the reduction of the effective cross section area of conductors. A fault diagnosis system consisting of a solenoid sensor, a constant current source with RF frequency signal processing unit and a motor driver/controller designed and implemented. This instrument can dot the sensor output variation due to deterioration corrosion, continuously. As a result, it was shown such corrosion detector can readily be utilized estimating the diameter change due to deterioration overhead distribution lines and in giving an warning or inform before severe aged conductor lead to fail.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.184-187
• /
• 2000

A network is an important portion of communications in these days. Because of many inconveniences of a wired-network, wireless solutions have been studied for many years. One of the results of those efforts is IEEE 802.11, wireless LAN. This paper briefly summarizes wireless LAN and specially focuses on the design of a network processor for the wireless LAN system. The processor has 16-bit instruction set suitably selected for network processing and low-power consumption. It is implemented and verified with a wireless LAN system model. The wireless LAN system is modeled in RTL excluding the RF module. The processor can be used in many wireless systems as a controller and utilized as a test module for the research of low-power schemes.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.21-24
• /
• 2001

Bluetooth wireless technology is a publicly available specification proposed for Radio Frequency (RF) communication for short-range and point-to-multipoint voice and data transfer. It operates in the 2.4GHz ISM(Industrial, Scientific and Medical) band and offers the potential for low-cost, broadband wireless access for various mobile and portable devices at range of about 10 meters. In this paper, we describe the structure and the test results of the bluetooth baseband module we have developed. This module has a UART interface for HCI and a audio codec for voice. The interface between controller and this module supports common control interface. An FPGA implementation of this module is tested for file and bit-stream transfers between PCs.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.5
• /
• pp.351-354
• /
• 2013

Thin-film transistors(TFTs) with silicon-zinc-tin-oxide(SiZnSnO, SZTO) channel layer are fabricated by rf sputtering method. Electrical properties were changed by different annealing treatment of dry annealing and wet annealing. This procedure improves electrical property especially, stability of oxide TFT. Improved electrical properties are ascribed to desorption of the negatively charged oxygen species from the surfaces by annealing treatment. The threshold voltage ($V_{th}$) shifted toward positive as increasing Si contents in SZTO system. Because the Si has a lower standard electrode potential (SEP) than that that of Sn, Zn, resulting in the degeneration of the oxygen vacancy ($V_O$). As a result, the Si acts as carrier suppressor and oxygen binder in the SZTO as well as a $V_{th}$ controller, resulting in the enhancement of stability of TFTs.