• 전기학회논문지P
• /
• 제53권2호
• /
• pp.94-99
• /
• 2004

In this paper, We design a RF control system capable of handling multiple POS thermal printers. The system has three parts including embedded master controller, RF controller and high-speed thermal printer. Specially the designed linux embedded controller has simple structure and high performance to connect the TCP/IP network. The effectiveness of the developed RF control system is shown by proposed food ordering system.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 추계학술대회
• /
• pp.583-584
• /
• 2022

드론의 발전으로 인해 드론의 임무는 다양한 분야에서 수행되며, 광범위한 영역에서 비가시권(BVLOS, Beyond Visual Line Of Sight) 비행한다. 대부분 드론은 무선 주파수(RF, Radio Frequency) 통신을 통해 운용되고 약 1-2 km의 제한된 반경에서만 비행이 가능하다. 이를 극복하기 위해 본 논문에서는 RF와 LTE (Long Term Evolution)를 활용하여 BVLOS에서 임무를 수행하는 드론을 조종하기 위한 다중 통신 프로토콜 기반 드론 조종 시스템을 제안한다. 제안한 시스템은 크게 조종부와 드론부로 이루어진다. 조종부는 조종기에서 발생한 하나의 조종 신호를 RF와 LTE를 통해 전송한다. 드론부는 RF와 LTE를 통해 이중으로 전송된 조종 신호를 통신 프로토콜의 우선순위에 따라 분류하여 FC (Flight Controller)로 전달한다. 제안한 조종 시스템을 통해 RF 통신 거리 한계를 극복하고 통신 연결 불능 상황을 방지할 수 있다.

• 디지털콘텐츠학회 논문지
• /
• 제17권3호
• /
• pp.173-180
• /
• 2016

본 논문에서는 종래의 보안관리 시스템과 송수신 모듈의 단점을 개선하기 위해 유무선 복합기능의 송수신 모듈과 이를 사용한 신뢰성 높은 실시간 보안시스템을 제안한다. 제안하는 복합 송수신모듈은 RF 제어 회로와 무선 송수신 회로로 구성된다. RF제어회로는 저전력 협대역 RF 송수신 시스템으로서 마이크로프로세서의 레지스터에 저장되어 있는 특정 주파수 대역을 불러올 수 있고, 임의로 값을 쓰거나 읽어 들여 임의 주파수의 송신출력을 사용자가 제어할 수 있도록 설계한다. RF 송신 모듈의 동작을 위한 구동 알고리듬을 제시하고 설계한 복합 송수신 모듈과 동작 알고리듬을 시작품으로 구현하여 실험을 통해 유효성을 확인한다.

• 전기전자학회논문지
• /
• 제15권4호
• /
• pp.287-292
• /
• 2011

The RF4Control stack is used with microcontrollers and IEEE(R) 802.15.4 transceivers. This paper explains the setup and power consumption measurements for the transceiver based remote controller and target node. It is assumed the reader of this paper has knowledge about RF4CE. The current consumption measurements are made using the ZigBee Platform included with the RF4Control stack. he current consumption measurements are presented, and battery life time is calculated for an remote controller. Note that the results presented in this paper are intended as a guideline only. A variety of factors will influence the battery life calculation and final measurements and calculations should be performed on ZigBee RF4CE Certified Platform.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.288-290
• /
• 2006

This paper presents the real-time water tank wireless control in a ship using duplex RF modules and PLC(Programmable logic Controller). The purpose of this paper is developing HMI(Human Machine Interface) for automation equipments. The system can low a cost because long wires are no more used. Analog signals of the water gauge and flow meter are changed to discrete signals by the micro-processor. The PLC checks the volume of water and runs On or Off of the valve and pump. Duplex RF modules send and receive data between the water tank and control room. Everywhere the Internet is used, operators are able to check the status of the system by the web-server.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권12호
• /
• pp.560-564
• /
• 2006

ZnO thin films were prepared by RF magnetron sputter deposition on p-Si(100) wafer with various cooling rates of substrate temperature such as the substrates were pre-heated to $400^{\circ}C$ before the deposition and then cooled down naturally or slowly to $300^{\circ}C,\;200^{\circ}C,\;100^{\circ}C$, and R.T. by the temperature controller during the deposition. Crystalline and micro-structural characteristics of the films were investigated by XRD and SEM. ZnO films which cooled down naturally or slowly by the temperature controller during the deposition, especially the film were deposited with cooling down from $400^{\circ}C\;to\;200^{\circ}C$ slowly. showed the most outstanding c-axis preferred orientation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1067-1070
• /
• 2003

In this paper, we present a remote measurement system for the wireless monitoring of ECU Sensor Signals of vehicle. In order to measure the ECU sensor signals, the interface circuit is designed to communicate ECU and designed terminal wirelessly according to the ISO, SAE regulation of communication protocol standard. A micro-controller 80C196KC is used for communicating ECU sensor signals. ECU sensor signals are transmitted to the RF-wireless terminal that was developed using the micro controller 80386EX. LCD, and RF-module. 80386EX software is programmed to monitor the ECU sensor signals using the Borland C++ compiler in which the half duplex method was used for the RS232 communication. The algorithms for measuring the ECU sensor signals are verified to monitor ECU state. At the same time, the information to fix the vehicle's problem can be shown on the developed monitoring software. The possibility for remote measurement of ECU sensor signals using 80386EX is also verified through the developed systems and algorithms.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2239-2241
• /
• 2003

A new RF control system of Pohang Accelerator Laboratory (PAL) storage ring is a subsystem upgraded PAL control system, which is based upon Experimental Physics and Industrial Control System (EPICS). There are 5 control components, Low Level RF System (LRS), Klystron System, Circulator System, Cavity System, Local Cooling Water System (LCW) at the storage ring of PAL. The new RF control system for the storage ring has been under development for one years, first versions of individual VME (Versa Module Europa) Input/output modules under construction and system integration begun. In this system, VMEbus-based hardware is widely used for front-end controllers (FDS), Input/output controller (IOC). A number of Programmable Logic Controller (PLC) and SUN workstations are also used for Operator Interfaces (OPI) in the control system. This paper describes the development VME I/O module to the new control system and how the design of this new system.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 추계학술논문발표회 논문집
• /
• pp.7-10
• /
• 2008

In our study, Monitoring RF System in real-time on leakage of gas cylinder is developed. The system is consisted of Pressure Transmitting part, Main Controller and Operating program. The pressure data of gas cylinder are transmitted to the modem of main controller part by RF module of Pressure Transmitting part and the data received through the modem are recorded in real-time and showed the situation of gas cylinder on the PC monitor. Through the test on the case of the artificial pressure-reduction, the detecting performance. of the developed system is conformed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2009년도 정기총회 및 추계학술대회 논문집
• /
• pp.243-245
• /
• 2009

In this paper, wireless remote controller for welderss are implemented using RF communication. It can be used for general welding power sources. Sometimes, wireless remote controllers for welders are needed because welding torches are far away from welding sources in the case of big ship-building or big tank constructions. In order to use the wireless remote controllers, digital cpu-based welding systems are essential for digital interfaces. But, in this paper, using digital resistors makes wireless remote controllers be easily applied to digital or analog welders. To demonstrate the practical significance of our results, some experimental results are presented.