• Proceedings of the IEEK Conference
• /
• 2002.06c
• /
• pp.165-168
• /
• 2002

This paper has been designed and implemented of web security system using RF card A security mechanism that was proposed in this paper provides web services on card reader reads RF card of user only. In this paper, user authentication and server authentication was provided by challenge/response mechanism. Also, this system was provides confidentiality of communication messages.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.583-586
• /
• 2000

A passive RF smart card incorporating a non volatile memory element is powered by inductive coupling to a proximately located RF reader. Therefore, the power consumption in the smart card should be low. In this study, we designed the low power passive RF smart card that is operated at 125kHz to apply to the subway ticket system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.626-629
• /
• 2003

In this paper, a system that implementation of Biometric System Using RF-ID. We organize a certification system which the security is strengthened, the information is flowed out and the presentation will do the possibility not to be abused. The loss of the credit card and problems which there is many of forgery back are happening. To solve such problems, We organized the system to use after we stored a fingerprint data at RF Card and going through certification necessary formalities. Various research to be related uses this system and is predicted. The development to common use goods will be possible through a certification procedure.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.713-716
• /
• 2003

In recent, the contactless IC card is widely used in traffic, access control system and so forth. Contactless smart cards use a technology that enables card readers to provide power for transactions and communications without making physical contact with the cards. Usually electromagnetic signal is used for communication between the card and the reader. Contactless card is highly suitable for large quantity of card access and data transaction. And its use becomes a general tendency more and more because of the development of RF technology and improvement of requirement for user convenience. This paper describes the hardware module to process contactless protocol for implementation contactless IC card. And the hardware module consists of specific digital logic circuits that analyze digital signal from analog circuit and then generate data & status signal for CPU, and that convert the data from CPU into digital signal for analog circuit.

• Journal of Korean Society of Transportation
• /
• v.28 no.2
• /
• pp.7-19
• /
• 2010

Users of metropolitan railroad is increased continuously because of its various advantage such as comfortableness, convenience and punctuality. Thus, several local government including Seoul considered new installation or extension of railroads and four railroad operators maintain seventeen lines at present. After public transportation reforms in 2004 and integrated discount fare system in 2007, public transportation become more convenient in many aspects. However, these trials gives much more complex allocating problems of revenues among public transportation operators. In this paper, we deal with revenue allocating problems among public transportation operators after integrated discount fare system in 2007. Specifically, this study focuses on allocating revenues to metropolitan railroad operators by using RF card data. This research roughly proposes the methodology of O/D extraction from RF card data, generalized cost estimation and allocating revenue algorithm. We use RF card data in order to draw out exact individual O/D data and try to compare our results with those of Korea Smart Card Company. In generalized cost estimation, survey study about transfer factors is conducted for accurate estimation of generalized cost function. Lastly, new allocating revenue algorithm using k-path and non-dominated path concept is suggested. It is expected that case study is also performed with real revenues and O/D data in order to check up the application. Preposed methodology in this research can contribute to solve present and future revenue allocating issues according to the introduction of LRT and private railroad.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1270-1272
• /
• 2003

Smart card system is being used in many countries to improve access to their transportation systems. Especially for subway system that typically see high volumes of passengers at specific times of the days, it's critical to find a ray to collect fares without unnecessarily delaying passengers. The card consists of antenna, modulation and demodulation block, power supply module and memory. The antenna receives the power and data signal from reader. The FRAM is used as the inner memory. And it is a non-volatile memory and complements the problems, that is high consumption and low data processing speed, of using conventional EEPROM in the passive smart cart. In this paper, we analyze and design the RF passive smart card to apply to the fare collection for the subway gate system.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.35-42
• /
• 2003

We have studied DC energy conversion of RF card by wireless communication. In order to attain an objective, it used the system which is a Rectenna. The main purpose of energy conversion system is the operation of the circuits at RF-ID system. The proposed RF-ID system is a lot classified with the reader and tag. Reader is a kind of the base station role supporting RF energy. And priority tag convert RF energy from the reader it was delivered with a wireless to DC energy. The energy which is converted like Tag. It transmits to the reader characteristic ID of each card. The tag is mainly divided into rectifier, power module, memory and controller. The FRAM maintains the data like a ROM in no-power situation. And the advantage is a low power element compared with other EEPROM. There are two considerations, when RF energy is converted into DC source by wireless. One is energy amount supported from the reader, the other is high power efficiency. This paper presents a study of simulation and experiments on the RF-DC conversion circuit in tag by the power efficiency concentrated.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.217-219
• /
• 2004

In recent years, the smart card is wifely applied for wireless communication, tracking, transportation logistics, diagnostic monitoring, access control and security. RF-ID system is universally applicable. Passive RF-ID system consists from reader and passive tag. The reader transmits energy and simple information to a tag by wireless and the power from the reader is transformed for controller, FRAM and Bluetooth module. in this paper, an analysis and design of smart card for the transmission of the car movement data is presented.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.75-77
• /
• 2008

Flexible electronics devices such as plastic display, thin film battery, membrane switch, organic memory for smart card applications will be presented. The performance and power consumption of various display technologies will be compared for OTP requirement in smart cards. Wireless power transmission by RF coupling through an antenna provides a potential power solution to smart cards. Finally, the general trend of smart card future developments will be discussed.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.71-71
• /
• 2012

Memory 반도체 Test공정에서 사용되는 Probe Card의 Probing Area가 넓어지면서 종래에 사용되던 Cantilever제품의 사용이 불가능하게 되고, MEMS공정을 사용한 새로운 형태의 Advanced제품이 시장에 출현을 하였다. MEMS형의 제품은 다수의 Micro Spring을 MLC(Multi Layer Ceramic)위에 MEMS 공정을 사용하여 생성하는 방식으로서 MLC는 좁은 지역에 다수의 Pin을 생성 할 수 있는 공간을 만들어 주며, 또 다른 이유는 전기적 특성인 임피던스를 맞추고 다수의 Pin의 압력에 의하여 생기는 하중을 Ceramic기판으로 지탱하기 위한 목적도 있다. 이에 MLC와 같은 전기적 특성을 임피던스를 맞춘 RF-CPCB를 사용하여 작은 면적에 다수의 Pin접합이 가능한 방법을 마련한 후, 이 RF-PCB를 부착하여 Pin의 하중을 받는 Wafer와 유사한 열팽창을 갖는 Substrate를 사용하여 MLC를 대체하여 다양한 온도 조건에서 사용이 가능하며, 복잡하고 공정비가 많이 드는 MEMS 공정에 의한 일괄 Micro Spring 생성 공정을 전주 도금 또는 2D방식의 도금 Pin으로 대체하였으며, Probe Card의 중요한 물리적 특성인 Pin들의 정렬도를 마련하기 위해 Photo Process를 사용한 Wafer로 만든 Wafer Pin Array Frame을 사용하여 2D 제작 Pin을 일괄 또는 부분 접합이 가능한 방법으로 Probe Array Head를 제작하여 이들을 부착하여 Probe Array Head를 이전의 MEMS공정 방법에 비해 쉽고 빠르게 만들어 probe Card를 제작 할 수 있게 되었다.