• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.997-1000
• /
• 2006

In this paper, we have used the 900Mha RF band and produced the transmitter-receivers to measure the distance of moving range of a crane. We selected the analog signal of 450Khz middle frequency band of the RF Baseset module, and the property data of phase response is analysed to estimate the range distance. We have earned the good results from the experiment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.461-462
• /
• 2016

IPS 측위는 GPS음영 지역인 실내의 특정 위치 정보를 판단하는 시스템으로 현재 위치에서 발생되는 신호 정보를 수집하는 시스템과 이 신호들로 구성된 실내 측위 지도, 측위 위치를 결정하기 위한 알고리즘 등에 따라 여러 종류로 나누어진다. 대표적인 IPS로 2.4Ghz, 5.0GHz 대역의 무선 신호(WiFi, BLE, Sensor Network, etc)를 활용하는 RF신호 기반 WPS 등이 있다. RF 신호를 기반으로 하는 실내 측위는 발생 기기의 고장, 장애물 발생, 채널 간섭 현상 등으로 인해 측위 시점 수집된 신호와 구축된 지도의 신호 정보가 달라 측위 정확도가 낮아지는 경우가 발생한다. 본 논문에서는 앞서 언급한 문제점을 해결하기 위해 기존 RF 환경을 사용하는 IPS 방안에 대하여 분석한다. 또한 RF 이외의 실내 측위 기술들에 대해서도 설명하고 측위 정확도를 위해 단일 측위 방식이 아닌 복합 측위 방식에 대한 설계를 제안한다.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.2
• /
• pp.29-33
• /
• 2021

A 5.8-GHz 1W wireless power transmission system was used for charging a smart phone. The voltage of one RF power receiver with antenna was not enough for charging. Several power receivers for charging a smart phone was connected serially. The voltage of several RF power receivers are highly enough for charging a smart phone within 50cm. However, the lack of current from small capacitances of RF-DC converters is not suitable for charging smart phone. It means very long charging time. In this paper, the voltage multiplier circuits for RF-DC converters were analyzed to increase the current and voltage at the same time to reduce the charging time in smartphone RF wireless charging. Through the analysis of multiplier circuits, the 7-stage parallel multiplier circuit with voltage-doubler units are suitable for charging the smartphone, which supplies 5V and 700mA at 3V@5.8GHz.

• Journal of Advanced Navigation Technology
• /
• v.18 no.5
• /
• pp.513-517
• /
• 2014

In this study, we implemented and designed an RF monitoring system to manage a dust collector wirelessly, which is manually operated. The dust collector prevents the emission of air pollutants and improves air condition. It is possible to implement a high-value monitoring system of a dust collector, the system will wirelessly monitor many important data such as the operating time, the amount of electricity consumption, and the differential pressure value of a large number of the dust collectors in an industrial site, the system also displays and saves these data on a manager's PC, and when an error occurs, the system sends the error message to a manager's mobile phone. Therefore, through the RF monitoring system implemented in this paper, it is possible to reduce unnecessary loss for recording information of each dust collector to stack emission management system (SEMS).

• Journal of Navigation and Port Research
• /
• v.28 no.10 s.96
• /
• pp.875-879
• /
• 2004

In this paper, sub-harmonic pumped(SHP) mixer using anti-parallel diode pair(APDP) is designed for 5 GHz band wireless communication system. Conventional mixers mix LO with RF, and obtain IF signal from the difference between LO and RF. As the frequency increase, LO signal requires higher LO power, better phase noise characteristics, more stable La. However, using APDP, the SHP mixer mixes the 2nd harmonics of LO signal. Therefore, the SHP mixer has an advantage that the LO signal frequency required for IF signal is reduced at half value of LO fundamental frequency. When LO power is 3 dBm, the conversion loss of manufactured SHP mixer is 12.83 dB. The isolation of LO/IF, 2LO/IF, RF/1F and LO/RF is 39.17 dB, 58 dB, 34 dB, and 67.9 dB. respectively. For this case, IP3 at input is 8 dBm.

• Journal of IKEEE
• /
• v.8 no.1 s.14
• /
• pp.79-85
• /
• 2004

In this paper, Sub harmonic mixer using anti-parallel diode pair is designed for 5.8 GHz Wireless LAN. Conventional mixers mix LO with RF and obtain IF signal from the difference between LO and RF. As frequency increase, LO signal is required increasing LO power, better phase noise, stable LO. But, using APDP, the SHP mixer mix the harmonics of LO signal. Therefore, Sub harmonic mixer is advantage that necessary LO signal frequency was used to operate the 1/2. When LO power is 3 dBm, the conversion loss of manufactured SHP mixer is 12.83 dB. The isolation of LO/IF, 2LO/IF, RF/IF and LO/RF is 39.17 dB, 58 dB, 34 dB, 67.9 dB. And IIP3 is 8 dBm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.1912-1921
• /
• 2015

In this paper, we introduce a testbed for testing the RF energy transfer technology in the Internet of Things (IoT) environment, and provide experimental results obtained by using the testbed. The IoT environment considered in this paper consists of a power beacon, which is able to wirelessly transfers energy via microwave, and multiple sensor nodes, which makes use of the energy received from the power beacon. We have implemented the testbed to experiment the RF energy transfer in such IoT environment. We have used off-the-shelf hardware components to build the testbed and have made the tesbed controlled by software so that various energy and data transmission protocol experiments can easily be conducted. We also provide experimental results and discuss the future research direction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9B
• /
• pp.1542-1550
• /
• 2000

Fiber optic link systems based on SCM scheme are widely used as efficient and economic RF signal links between base station and a central station in mobile communication networks. However, its performance can be seriously limited depending on the operational conditions of not only the optical transmission system but also the wireless link in various environments. In this paper, we propose an analytic model for performance analyses of the SCM fiber optic link for CDMA RF signal transmission in various link environments. We present optimal operational conditions taking account of the nonlinear effects of the optical transmission system, and the multiple access interference produced at the wireless link. It has been shown through the BER analyses in this paper that the selection of optical modulation index of the SCM fiber optic links can be found optimally to minimize the fiber optic link noises and intermodulation distortion due to LD.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.4
• /
• pp.808-814
• /
• 2007

In this paper, the measurement system of crane moving range is concerned with range recognition technology using phase and magnitude of radio wave. By the proposed technology, we design the radio transmitter and receiver and realize the measurement system, and save the data in disk that is earned from 900Mhz RF signal, middle frequency 450khz of analog signal. As a result of RF measurement, we got 9.3 dBm of RF output and 96 dBc@10khz of phase noise. Range information is earned the data through digital signal processing of IF signal. For the estimation of range measured, we analyze the difference between real range and measurement range, and also suggest the method to remove the measurement error using average processing and amplitude properties. A result is 0.12 and 0.00422 deviation in l0mn-30m and within 5m respectively, and then 2.4E-04 deviation in 4m by using compensation of level characteristics lately.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.5
• /
• pp.579-586
• /
• 2005

Recently, it has demanded to the wireless monitoring system in stand-alone PV power generation system. We propose the multiplex monitoring method using RF unit of low-price. RF unit consists of RF modem and communication controller. It is also able to use by repeater to communicate long distance. In this paper. two algorithms were programmed by CCS-C and C++ for multiplex monitoring method, The algorithm of choosing unit was used 'select and poll method' and the course assignment algorithm was embodied with 'Bellman-Ford algorithm'. The good result was achieved in the actual test without communication-data lose. The proposed method will be applied such as monitoring system of PV light on the wayside, monitoring system of unmanned lighthouse, monitoring system of refrigeration container on vessel and so on. It can be applied in the field that various ocean energy system.