• Title/Summary/Keyword: RETENTION AREA

Search Result 491, Processing Time 0.027 seconds

A Case Study on Development of Stormwater Retention and Infiltration Pond System (우수저류 및 침투연못 시스템개발 사례연구 - 우수 저류 및 침투 효과를 중심으로 -)

  • Lee, Jae Chul;Yoon, Yeo Jin
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.6 no.4
    • /
    • pp.52-61
    • /
    • 2003
  • This study was carried out to analyze the effects of stormwater retention and infiltration pond on reduction of flood peak and volume in a experimentally developed ecological pond. The experimental site has 542$m^2$ watershed area, 1,310mm yearly-averaged rainfall. And the area of the retention pond is 60$m^2$, the maximum water depth is 0.5m, the maximum and average storage is 15$m^3$and 9.3$m^3$d. And the area of infiltration pond is 58$m^2$, and the water depth varies 0.2m~0.5m. The monitoring system consists of one rainfall gage, one Parshall flume and acoustic water level gage, two rectangular weirs and acoustic water level gage for discharge gaging, and one data recording unit. Data from ten storm events in total, three storm events in year 2000 and seven storm events in year 2001, were collected. From the data the evaporation rate was achieved with the water balance equation, and the result shows 5.0mm/day in average. The result from the analysis of the effects on reduction of flood peak and volume, is that 14% reduction of flood volume and 15% reduction of flood peak in retention pond and 49% reduction of flood volume in infiltration pond.

The Retention and Chemical Composition of NVOCs (Natural volatile organic compounds) in a Warm Temperate Forest (난대림의 NVOCs 잔존량 및 성분 특성)

  • Sujin, Jang;Dohyun, Ryu;Kiwan, An
    • Journal of Environmental Science International
    • /
    • v.31 no.11
    • /
    • pp.901-910
    • /
    • 2022
  • The aim of this study was to investigate the amount (i.e., retention volume) and chemical composition of Natural volatile organic compounds (NVOCs) across different sites in a temperate forest. The three forest sites that were considered include riparian zones (site 1), streams (site 2), and densely-canopied areas (site 3). From May to October 2021, a mini pump was used to measure the collected NVOCs. These measurements were conducted once a month, from 10:30 am to 11:30 am; these times encompass peak visitation times. In the tree layers of the site 1 and 2, Quercus acuta was dominant, whereas Camellia japonica dominated their subtree layers. On the other hand, the tree layer of site 3 was dominated by Castanopsis sieboldii, whereas Camellia japonica dominated its subtree layer. The retention volume and chemical composition of NVOCs was as follows: benzaldehyde (107.528ppm), α-pinene (37.868ppm), linalool (16.258ppm), eucalyptol (14.818ppm), and sabinene hydrate (14.679ppm). In particular, the retention volume of benzaldehyde decreased as temperature increased. In contrast, the retention volume of α-pinene increased as the temperature increased. The differences in forest topography across the studies sites were in the following order: riparian area> forest area> stream area.

Soil water retention and hysteresis behaviors of different clayey soils at high suctions

  • Li, Ze;Gao, You;Yu, Haihao;Chen, Bo;Wang, Long
    • Geomechanics and Engineering
    • /
    • v.30 no.4
    • /
    • pp.373-382
    • /
    • 2022
  • Unsaturated soil at high suctions is widespread. Many civil engineering projects are related to the hydro-mechanical behavior of unsaturated soils at high suctions, particularly in arid and semiarid areas. To investigate water retention behaviors of nine clayey soils (one is classified as fat clay and the others are classified as lean clay according to the unified soil classification system), the high suction (3.29-286.7 MPa) was imposed on the specimens at zero net stress by the vapor equilibrium technique. In this paper, the effect of void ratio on the water retention behavior at high suction was discussed in detail. Validation data showed that soil types, i.e., different mineralogical compositions, are critical in the soil water retention behavior at a high suction range. Second, the hysteresis behavior at a high suction range is mainly related to the clay content and the specific surface area. And the mechanism of water retention and hysteresis behavior at high suctions was discussed. Moreover, the maximum suction is not a unique value, and it is crucial to determine the maximum suction value accurately, especially for the shear strength prediction at high suctions. If the soil consists of hydrophilic minerals such as montmorillonite and illite, the maximum suction will be lower than 106 kPa. Finally, using the area of hysteresis to quantify the degree of hysteresis at a high suction range is proposed. There was a good correlation between the area of hydraulic hysteresis and the specific surface area.

Determination of Optimum Design Capacity of Bio-retention for Improvement of Urban Water Cycle (도시 물 순환 개선을 위한 생태저류지의 최적설계용량 결정)

  • Lee, Okjeong;Choi, Jeonghyeon;Lee, Jeonghoon;Kim, Sangdan
    • Korean Chemical Engineering Research
    • /
    • v.55 no.6
    • /
    • pp.745-753
    • /
    • 2017
  • In this study, a design strategy is proposed to restore the distorted urban water cycle to the natural water cycle through the LID facility. This is accomplished by determining the optimal LID facility design capacity through which flow duration curves remain the same before and after urban development. A part of the Noksan National Industrial Complex in Busan was selected as the study area and EPA SWMM was constructed to simulate long-term stormwater for various land use scenarios and LID facility design capacity. In the case that the study area was assumed to be a forest area or an agricultural area before urban development, it was found that it was necessary to allocate 7.3% or 5.5% of the impervious area to the area of the bio-retention in order for the flow duration curve to remain the same as before urban development. As a result of the sensitivity analysis of the bio-retention design capacity according to regional rainfall characteristics, the design capacity of 3.8~5.5% of impervious area is needed for the development of agriculture area. Therefore, it can be seen that the optimum capacity can be significantly different according to regional rainfall characteristics. On the other hand, as a result of analyzing the sensitivity of the design capacity according to the variation of the depth of each layer constituting the bio-retention and the size of contributing catchment area, the sensitivity of the optimal design capacity with respect to the design specifications of the bio-retention and the size of contributing catchment area was not significant.

A CASE REPORT OF MUCOID RETENTION CYST IN MAXILLARY SINUS. (상악동 점액저유낭종의 일례)

  • Kim Han Pyoung
    • Journal of Korean Academy of Oral and Maxillofacial Radiology
    • /
    • v.3 no.1
    • /
    • pp.47-49
    • /
    • 1973
  • The author have observed mucoid retention cyst in the right maxillary sinus of the patient, 41 years old woman, complained discharging of purulent exudate on the right maxillary molar teeth area, and obtained the following conclusions; 1. The mucoid retention cyst in maxillary sinus casts a faint dome shaped shadow into the radiolucent image of maxillary sinus. 2. The mucoid retention cyst in maxillary sinus may be occured without a history of trauma. 3. Intraoral standard films are also valuable for the interpretation of the lesions in maxillary sinus but only extraoral roentgenograms.

  • PDF

The Evaluation of Geotextiles by Ultraviolet(UV) Effect during the Landfill Construction (폐기물 매립지의 부직포 포설시 UV 영향에 대한 평가)

  • 고재학;이재영
    • Proceedings of the Korean Society of Soil and Groundwater Environment Conference
    • /
    • 1998.11a
    • /
    • pp.206-215
    • /
    • 1998
  • Using of geosynthetics with linear materials(sand, gravel, clay soil) is rapidly increased in landfill. With geosynthetics, geotextiles often expose to solar radiation(Ultraviolet) on long terms during the installation. In this paper, the results will represent the strength retention rate and tensile retention rate of geotextiles between outdoor exposed and protected by 15cm thickness of soil. As a result of cumulating solar radiation in geotextiles was increased, the strength retentions rate of P.P(500g/$m^2$), P.P(700g/$m^2$) and P.P(1000g/$m^2$) were decreased and the lower weight of unit area of geotextiles, the faster decrease of strength retention rate. P.E.T(600g/$m^2$) was showed a distinctive trend that the strength retention rate increased. The tensile retention rate of tested geotextiles was decreased during the simulation. However, the strength and tensile retention rate of geotextiles covered by soil had changed insignificantly. Therefore, it can surmise that the soil covering will help geotextiles to be protected from UV effecting

  • PDF

Applied physics in relation to Denture Impression Making (의치인상채득(義齒印象採得)에 관련(關聯)되는 응용물리학(應用物理學))

  • Kim, Yeong-Su
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.9 no.1
    • /
    • pp.79-83
    • /
    • 1969
  • 1) 가능(可能)한한 조직(組織)이 변형(變形)되지 않아야 한다. 2) Atmospheric pressure를 이용(利用)하기 위(爲)하여 peripheral border 에 있어서의 조직변형(組織變形)이 필요(必要)한 경과(境過)는 그 정도(程度)가 eiastic force가 retentive force 보다 크지 않도록 최소한(最小限)으로 해야 한다. 3) Denture base와 조직(組織)의 원형간(原形間)에는 접촉(接觸)이 밀접(密接)해야 한다. 그래야 saliva의 film 균일(均一)하고 얇게 될 수 있다. 4) Atmospheric pressure는 denture의 retention과 중요(重要)한 연관성이 있으므로 physiologic seal area를 형성(形成)해 주는 것이 유리(有利)하다. 5) Ridge의 형태(形態)도 denture의 retention 대(對)한 하나의 중요(重要)한 인자(因子)이다. 6) Denture에 의(依)해서 피개(被蓋)되는 면적(面積)은 retention에 관계(關係)되는 한 인자(因子)로써 피개면적(被蓋面積)이 클수록 유지력(維持力)이 커진다. 7) Saliva의 viscosity도 retention의 한 인자(因子)가 된다. 8) Friction은 retention의 한 인자(因子)가 될수는 있으나 병인적(病因的)인 증상(症狀)을 유발(誘發)할수 있으므로 이용(利用)해서는 않된다.

  • PDF

Estimation for Retention Factor of Isoflavones in Physico-Chemical Properties

  • Lee, Seung-Ki;Row, Kyung-Ho
    • Bulletin of the Korean Chemical Society
    • /
    • v.24 no.9
    • /
    • pp.1265-1268
    • /
    • 2003
  • The estimation of retention factors by correlation equations with physico-chmical properties maybe helpful in chromatographic work. The physico-chemical properties were water solubility (S), hydrophobicity (P), total energy ($E_t$), connectivity index 1 ($^1{\chi}$), hydrophilic-lipophlic balance (x) and hydrophilic surface area (h) of isoflavones. The retention factors were experimentally measured by RP-HPLC. Especially, the empirical regulations of water solubility and hydrophobicity were expressed in a linear form. The equation between retention factors and various physico-chemical properties of isoflavones was suggested as $k = a_0 + a_1\;log S + a_2log\;P^Q + a_3(E_t) + a_4(^1{\chi}) + a_5(x) + a_6(h)$, and the correlation coefficients estimated were relatively higher than 0.95. The empirical equations might be successfully used for a prediction of the various chromatographic characteristics of substances, with a similar chemical structure.

THE EFFECT OF SIZE AND SHAPE OF RETENTION ELEMENT ON COMPOSITE TO METAL BOND STRENGTH (유지요소의 크기와 형태가 간접복합레진과 금속간의 결합강도에 미치는 영향)

  • Lee, Yun-Jung;Jeon, Young-Chan;Jeong, Chang-Mo
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.45 no.5
    • /
    • pp.665-674
    • /
    • 2007
  • Purpose: The purpose of this study was to investigate the effect of sire and shape of retention element on the bond strength of indirect composite resin and metal. Material and method: The metal disk specimens, each 6mm in diameter, were cast from CrCo alloy. They were divided into 8 groups by applied retention element. retention bead group $B2\;({\phi}\;0.2mm),\;B4\;({\phi}\;0.4mm),\;B6\;({\phi}\;0.6mm),\;B8\;({\phi}\;0.8mm)$, retention crystal group C2 (0.2mm), C5 (0.5mm), C8 (0.8mm) and sandblasting group SB ($110{\mu}m\;Al_2O_3$ blasting) as control. Eighty-eight metal specimens were veneered with $TESCERA^{(R)}$ Indirect resin system. One specimen of each group was sectioned and the resin-metal bonding pattern at the interface was observed under measuring microscope. Other specimens were then tested for tensile bond strength on an Instron universal testing machine at a crosshead speed of 2mm/min. Results: 1. Compared to sandblasting, beads or crystals increased the resin-metal bond strength (P<.05). 2. 0.2mm retention crystals were most effective in improving the resin-metal bond strength (P>.05). 3. 0.2mm beads showed the highest bond strength among retention bead groups, but there was no statistically significant difference (P>.05). 4. Retention crystals tend to be higher in bond strength than retention beads due to wider surface area. 5. The larger retention element, the larger the undercut for the mechanical retention, but the gap at resin-metal interface was also increased. Conclusion: Within the limitations of this study, 0.2mm retention crystals were most effective in improving the resin-metal bond strength.

Influences of Workplace Bullying, Social Support and Resilience on Retention Intention among Hospital Nurses: The Mediating Effect of Professional Quality of Life (병원간호사의 직장 내 괴롭힘, 사회적 지지, 회복탄력성이 재직의도에 미치는 영향: 전문직 삶의 질의 매개효과)

  • Kim, Jin Sun;Lee, Hang Shim
    • Journal of Korean Clinical Nursing Research
    • /
    • v.27 no.1
    • /
    • pp.23-34
    • /
    • 2021
  • Purpose: The purpose of this study is to examine the mediating effect of professional quality of life among hospital nurses in the effects of workplace bullying, social support and resilience on retention intention. Methods: A descriptive and cross-sectional study was conducted on 414 hospital nurses who worked for at least two months at a general hospital in the Seoul metropolitan area. The data were analyzed using IBM SPSS 23.0/AMOS 22.0 programs and employed reliability verification, descriptive statistics include frequency analysis, confirmatory factor analysis, structural equation modeling, and bootstrapping. Results: As a result of the study's structural modeling verification, workplace bullying had a negative effect, social support had a positive effect, resilience had a positive effect on professional quality of life, and professional quality of life had a positive effect on retention intention. Also, workplace bullying, social support, and resilience did not directly impact on retention intention. However, the professional quality of life had a complete mediating effect in the relationships between workplace bullying, social support, resilience and retention intention. The study results verified the mediating effect of professional quality of life affecting the retention intention. Conclusion: In order to improve professional quality of life and retention intention, strategies to prevent workplace bullying and promote social support and resilience are needed.