• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.8 s.179
• /
• pp.1931-1939
• /
• 2000

Operating excitation forces of the linear vibratory system are normally determined by direct measurement techniques using load cells, strain gauges, etc. But, hydraulic forces of the rotating turbomachinery such as centrifugal pumps are exerted on an impeller due to asymmety of the flow by the interaction between pump impeller and volute. So, investigations of wide range of hydraulic designs and geometric deviations are difficult by direct method. This paper presents a hybrid approach for fourier transformed operational excitation forces, which uses pseudo-inverse matrix of the transfer matrix for the system and the measured vibrational data with standard installed pump. The determination of the transfer function matrix is based on a linear rotor/stationary system and steady state harmonic response in finite element analysis. And, vibrational data is collected in both vertical and horizontal directions at inboard and outboard bearing housings. The results of the process may be enhanced by making acceleration measurements at many more locations than there are forces to be determined.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.5
• /
• pp.694-697
• /
• 2000

Laying hens kept in different light and dark periods of the day at high ambient temperature of maximum $35^{\circ}C$ were challenged to $38.5{\pm}0.5^{\circ}C$ acute heat 3 hours daily for 7 consecutive days. They were found to have a significant (p<0.01) acclimatization response (rectal temperature) to heat stress during the dark period compared to those exposed to the same temperature during the light period. The blood pH was not significantly different. The partial pressure of carbon dioxide ($PCO_2$) was significantly high (p<0.01) except in day 4. Similarly the blood bicarbonate ($HCO_3$) concentration was significantly high (p<0.05) except day three and day four. Acute heat exposure in the first day increased the body temperature in both groups (Light and Dark) reaching $44^{\circ}C$, followed by gradual reduction in body temperature. The dark treated birds showed rapid reduction in body temperature ($42.88^{\circ}C$) and adaptation to high temperature during days 2-4 but that this was lost to some extent in days 6-8. However this was not obvious in the light treated birds. It is concluded that darkness reduce hyperthermia and enhance acclimatization responses during acute heat stress.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.8
• /
• pp.1044-1049
• /
• 2000

Three wethers fitted with silastic catheters for collection of pancreatic juice, and cannulas located in the abomasum and the duodenum were used to investigate the effects of different hay and energy intake on pancreatic exocrine secretion. The wethers were fed Italian ryegrass hay or alfalfa hay at maintenance energy requirement and alfalfa hay ad libitum. High energy intake from alfalfa significantly increased abomasal flow of dry matter and both the concentration and daily secretion of ${\alpha}-amylase $. The high energy intake also tended to increase daily secretion of lipase, trypsin and chymotrypsin through the large volume of pancreatic juice. Compared with Italian ryegrass hay, alfalfa hay at the maintenance decreased abomasal dry matter flow, but increased concentration of ${\alpha}-amylase $ in the pancreatic juice, and tended to increase daily secretion of ${\alpha}-amylase $. The secretion of the other enzymes was not different between the two hays at maintenance intake. These results suggest that the kind of hay could change the concentration of ${\alpha}-amylase $ in the pancreatic juice, and that the intake level of alfalfa hay affects the ${\alpha}-amylase $ concentration and the juice volume secreted from the pancreas.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.9
• /
• pp.1323-1328
• /
• 2000

Bovine colostrum, which contains a large quantity of immunoglobulins, is indispensable for newborn animals. The establishment of a new procedure for preserving colostrum without losing the immunological activity is significant. We examined the effect of high hydrostatic pressure treatment (100~500 MPa) on the preservability and the immunochemical activity of bovine colostrum. When high hydrostatic pressure treatment was 300 MPa or more, the increase of the total viable count, coliforms and psychrotrophic gram-negative bacteria was suppressed effectively. In particular, the number of coliforms in colostrum treated at 300 MPa or more hardly increased for 35 days at $4{^{\circ}C}$. At 400 MPa or more, both gelling of the colostrum and denaturation of immunoglobulins were observed. However, if the pressure was 300 MPa, immunoglobulins were scarcely influenced and the neutralizing titers against the bovine coronavirus did not decrease. Therefore, it was suggested that 300 MPa was the best pressure for good preservability of colostrum without reducing the immunochemical response.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.7 s.178
• /
• pp.1681-1688
• /
• 2000

A dynamic model for the prediction of surface topography in high speed end milling process is developed. In this model the effect of tool runout, tool deflection and spindle vibration were taken in to account. An equivalent diameter of end mill is obtained by finite element method and tool deflection experiment. A modal parameter of machine tool is extracted by using frequency response function. The tool deflection, spindle vibration chip thickness and cutting force were calculated in dynamic cutting condition. The tooth pass is calculated at the current angular position for each point of contact between the tool and the workpiece. The new dynamic model for surface predition are compared with several investigated model. It is shown that new dynamic model is more effective to predict surface topography than other suggested models. In high speed end milling, the tool vibration has more effect on surface topography than the tool deflection.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.1
• /
• pp.56-62
• /
• 2012

This paper presents design and implementation of the speed controller for DC motor system using Embeded Target for TI C2000 DSP library in Matlab/Simulink is introduced. Speed controller are easily design and implemented by using the Matlab/Simulink program. Feedback of motor speed is processed through eZdsp F2812 AID converter using encoder and pulse meter as speed sensor. Real-time program of controller is drawn using Simulink and converted program code for speed control of P control, PID control and parameter estimation base adaptive control is downloaded into the TI eZdsp 2812 board. Experiments were carried out to examine validity of speed response for implemented controllers. And even if controlled plant becomes alteration studied controller design and implementation easily method.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.799-800
• /
• 2006

Wrought Si-steels are generally used for electromagnetic valves, which are needed good response. To date, Hitachi Powdered Metals Co., Ltd. have produced Fe-Si base sintered magnetic material, EU-52, which shows a magnetic flux density of more than 1.25T at 2000A/m and a maximum permeability of more than 3500. However these magnetic properties are lower than that of wrought Si-steels. Because EU-52 has a low density of $7.2Mg/m^3$. For improving the magnetic properties, it is necessary to increase the density of sintered cores. To increase density, a new mixing method of coating fine Si powders on atomized iron powders was developed, for avoiding the Kirkendall effect. As the result, developed P/M Fe-Si magnetic cores shows higher density of $7.38Mg/m^3$, higher magnetic flux density of 1.48T at 2000A/m and higher maximum permeability of 6800.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.199-203
• /
• 2004

In this paper, we only describe the digital block of two-channel 18-bit analog-to-digital (A/D) converter employing sigma-delta method and xl28 decimation. The device contains two fourth comb filters with 1-bit input from sigma­delta modulator. each followed by a digital half band FIR(Finite Impulse Response) filters. The external analog sigma-delta modulators are sampled at 6.144MHz and the digital words are output at 48kHz. The fourth-order comb filter has designed 3 types of ways for optimal power consumption and signal-to-noise ratio. The following 3 digital filters are designed with 12tap, 22tap and 116tap to meet the specification. These filters eliminate images of the base band audio signal that exist at multiples of the input sample rate. We also designed these filters with 8bit and 16bit filter coefficient to analysis signal-to-noise ratio and hardware complexity. It also included digital output interface block for I2S serial data protocol, test circuit and internal input vector generator. It is fabricated with 0.35um HYNIX standard CMOS cell library with 3.3V supply voltage and the chip size is 2000um by 2000um. The function and the performance have been verified using Verilog XL logic simulator and Matlab tool.

• Environmental Mutagens and Carcinogens
• /
• v.20 no.1
• /
• pp.1-6
• /
• 2000

자궁내 반응에 대한 용량 의존적인 효과를 검색하기 위해 에스트로겐 agonist 및 antagonist를 사용하여 미성숙 랫드에서 uterotrophic assay를 실시하였다. 김(2000) 등은 이미 난소절제랫드를 이용한 3-day uterotrophic assay에서 에스트로겐성 물질에 대한 검색 시험을 실시한 바 있다. 양성대조물질인 17-ethinyl estradiol (EE)을 미성숙랫드에 매일 3일간 피하 투여하였으며, EE의 에스트로겐 활성을 차단하기 위한 항에스트로겐성 물질인 ZM189.154은 EE와 병행 투여하였다. 본 시험 결과 EE 1.0$\mu\textrm{g}$/kg 이상 투여군에서는 자공 비대와 fluid 저류등이 대조군에 비해 육안적으로 뚜렷하게 나타났다. 자궁무게(wet 및 blotted)는 용량 의존적으로 증가하였으며, 특히, EE 1.0$\mu\textrm{g}$/kg 이상에서는 유의성있는 증가를 나타내었다. 또한 질무게 증가도 자궁무게 증가와 일치 하였다. EE 0.3$\mu\textrm{g}$/kg을 투여한 후 ZM189, 154 0.1 mg/kg 및 1.0 mg/kg 투여와 비교할 때 EE에 의해 유도된 에스트로겐 활성이 용량 의존적으로 감소되었으나 유의성 있는 결과는 ZM189, 154 1.0 mg/kg군에서만 나타났다. 본 연구결과 EE는 uterotrophic assay에서 자궁 무게 (wet와 blotted)를 용량 의존적으로 증가시켰으며, ZM189, 154 1.0mg/kg은 EE의 에스트로겐 활성을 유의하게 감소시켰다. 따라서 미성숙 랫드를 이용한 3-day uterotrophic assay는 내분비계 장애물질 검색 시험법으로 우수하다는 것을 알 수 있었다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.307-310
• /
• 2000

평판에서 발생되는 램파가 물체 내에 존재할 수 있는 미세 결함과의 상호작용에 의해 비선형 음향효과를 발생시키는지 관찰하고 이로부터 결함의 존재 유$\cdot$무를 확인하고자 했다. 이차원의 판형 매질로서 $2000{\times}110{\times}2{\cal}mm^3$인 강철판을 사용했으며 결함은 강철판의 임의의 위치에 인위적으로 미세틈새를 형성하여 모델화시켰다. 488kHz의 저주파수 연속파와 톤버스트 형태의 1MHz 고주파수 음파를 입사시켰다. 결함의 유$\cdot$무에 따른 강철판에서의 수신음파에 대한 주파수 응답을 통하여 비선형 음향반응인 배진동 주파수와 합$\cdot$차 주파수의 발생을 관측함으로써 매질 내의 결함 유$\cdot$무를 판별하고자 했다. 결함이 존재할 경우, 존재하지 않을 경우와 비교했을 때 배진동 주파수는 진폭이 15dB, 합$\cdot$차주파수는 진폭이 18dB이상 증가됨을 관찰함으로써 평판에서의 결함의 존재 유$\cdot$무를 확인할 수 있었다.