• Proceedings of KOSOMES biannual meeting
• /
• 2007.05a
• /
• pp.1-7
• /
• 2007

OPRC-HNS Protocol places the responsibility for having on-board a pollution incident emergency plan, notifying other States the incident facts in case of being affected by that incident, development of national contingency plan, international co-operation in pollution response, research and development, technical co-operation, promotion of bilateral and multilateral co-operation in preparedness and response, providing of information service, promotion of education and training, providing of technical services and technical assistance, etc. on parties to pursue their goals. After joining OPRC-HNS protocol, the government is required to inspect current status of matters related to HNS for its relevance on any laws. Additional items including establishment of component organization playing a role of managing response institution, manpower and resources, purchase response resource, development of response technique, and those also to enforce education and training to promote the party's duty. The facts described above drive up to analyze the benefits and burdens of relevant industry which appears in those procedure.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.9
• /
• pp.5-17
• /
• 2022

Recently, several studies have been conducted on virtual fixed-point and elastic soil spring methods to simulate the soil-pile interaction in response to spectrum analysis of pile-supported structures. However, the soil spring stiffness has not been properly considered due to the seismic load magnitude, and studies on the response spectrum analysis of pile-supported structures considering this circumstance are inadequate. Therefore, in this study, the response spectrum analysis was performed considering the soil spring stiffness according to the seismic load magnitude, and the dynamic behavior of the pile-supported structure was evaluated by comparing it with existing virtual fixed-point and elastic soil spring methods. Comparing the experiment and analysis, the moment differences occurred up to 117% and 21% in the virtual fixed-point and elastic soil spring models, respectively. Moreover, when the analysis was performed using an API p-y curve considering the soil spring stiffness according to the seismic load magnitude, the moment difference between the experiment and analysis was derived at a maximum of < 4%, and it is the most accurate method to simulate the experimental model response.

• Korean Journal of Poultry Science
• /
• v.33 no.1
• /
• pp.25-32
• /
• 2006

This experiment was conducted to investigate the effects of dietary Vita2000 on growth performances and immune response in broiler chickens. One-day-old male chicks were fed diets containing 0, 0.5 and 1% Vita2000 (with or without antibiotics) for 5 wks. There were no significant differences in daily weight gain among the treatments, but feed intake in 1% Vita2000 groups (T3 and T4) were significantly lower than control (P<0.05). The relative abdominal fat weight and the level of crude fat in leg meat on groups fed diets containing 1% Vita2000 (T3 and T4) were significantly decreased as compared to those of control (P<0.05). The content of cholesterol in leg meat was not affect by dietary treatment. The intestinal total microbes, Coli form, Lactic acid bacteria and Salmonella spp. from bird fed 1% Vita2000 diets was significantly reduced compared to those of control. The production of IB antibody in chicks fed diet containing 0.5% Vita2000 was significantly higher than that of control groups. The overall results indicate that dietary Vita2000 may be a valuable alternative to antibiotics for optimizing growth performances, particularly for reducing the abdominal fat of broiler chicks.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.04a
• /
• pp.170-177
• /
• 2000

Recently many high-rise apartment buildings are constructed using the box system which is composed only of concrete walls and slabs. Commercial softwares such as ETABS used for the analysis of high-rise apartment buildings are employing the rigid diaphragm assumption for simplicity in the analysis procedure. In general the flexural stiffness of floor slabs are ignored in the analysis, This assumption may be reasonable for the estimation of seismic response of framed structures. But in the case of the box system used in the apartment buildings floor slabs has major effects on the lateral stiffness of the structure. So if the flexural stiffness of slabs in the box system is ignored the lateral stiffness may be significantly underestimated, For these reasons it is recommended to use plate elements to represent the floor slabs. In the study A typical frame structure and a box system structure are chosen as the example structure. When a 20 story frame structure is subjected to the static lateral loads the displacements of the roof are 15.33cm and 17.52cm for the cases with and without the flexural stiffness of the floor slabs. And in case of box system the roof displacement was reduced from 16.18cm to 8.61cm The model without the flexural stiffness of floor slabs turned out to elongate the natural periods of vibration accordingly.

• Structural Engineering and Mechanics
• /
• v.48 no.4
• /
• pp.455-466
• /
• 2013

In recent years, many countries have added railway noise to the issues covered by noise regulations. It is known that the rail is the dominant source of rolling noise at frequency range of 500Hz-2000Hz for the conventional speeds (<160km/h). One of the effective ways to reduce noise from railway track is using a rail vibration absorber. To study the acoustic performance of rail absorber, the decay rates of vibration have long been used by researcher. In this paper, A FE model of a periodic supported rail with infinite element in ABAQUS is developed to study the acoustic performance of the rail absorber. To compute the decay rates, acceleration responses along the rail transferred to MATLAB to obtain response levels in frequency domain and then by processing the response levels, the decay rates obtained for each1/3octav band. Continous rail absorber is represented by a steel layer and an elastomer layer. The decay rates for conventional rail and rail with one-side absorber and also, the rail with two side absorber are obtained and compared. Then, to improve the system of rail absorber, a steel plate with elastomer layer is added to bottom of the rail foot. The vertical decay rate results show that the decay rate of rail vibration along the track is significantly increased around the tuned frequency of the absorber and thus the rail vibration energy is substantially reduced in the corresponding frequency region and also effective in rail noise reduction.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.5
• /
• pp.115-123
• /
• 2000

In this paper, a block FIR(Finite Impulse Response) filtering architecture is proposed for IF digital down converter. Digital down converter consists of digital mixers. decimation filters and down samplers. In this proposed structure, it is shown that a efficient parallel decimation filter architecture can be produced by cancellation of inherent up sampling of the block filter and following down sampler Furthermore. it is shown that computational complexity of the proposed architecture is reduced by exploiting the block FIR structure and zero values of the digital mixers.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.13 no.2
• /
• pp.165-181
• /
• 2000

Sinichengpaeum has been widely used in the oriental medical treatment of nasal diseases. These studies were performed done to investigate the effect of Sinicheng- paeum on the anti-allergic action We studied the vascular permeability response induced by the histamine and serotonin injection(allergy Ⅰ type), homologous PCA provoked by the IgE-like antibody against EWA(allergy Ⅳ type), contact dermatitis induced by picryl chloride(allergy Ⅳ type), delayed type hypersensitivity response to SRBC (allergy Ⅳ type), and the amount of eosinophil and IgE. The results were as follows: 1. The effect of Sinichengpaeum on vascular permeability responses to intradermal histamine and serotonin were significant. 2. In the homologous PCA provoked by the IgE-like antibody against white egg albumin, Sinichengpaeum showed a significant effect. 3. In the delayed type hypersensitivity responses to picryl chloride, Sini-chengpaeum provoked a significant effect. 4. After reaction provoked by picryl chloride, Sinichengpaeum showed an insignficant effect on amount of eosinophil, but a significant effect in IgE amount. 5. In the delayed type hypersensitivity responses to SRBC, Sinichengpaeum provoked a significant effect. 6. After reaction provoked by SRBC, Sinichengpaeum showed a significant effect on amount of cosinophil, but an insignificant effect in IgE amount.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04a
• /
• pp.152-154
• /
• 2000

Electro_optical characteristics in AC-PDP are confined by a lots of parameters. especially driving pulse shape is very important to improve AC-PDP's luminosity and efficiency. In that experiment measure the luminosity, IR(Infra Red) peak value and response time as the increase of 1st, 2rd sustain pulse width. The VDS(Versatile Driving Simulator -developed by kwangwoon university-) was used to make driving pulse shape. It is found that IR response time after displacement current, Luminosity and IR peak value are changed on account of 1st,2rd sustain pulse width.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.159-166
• /
• 2000

Non-destructive out-hole tests, impact-echo and impact-response are widely applied to evaluate integrity of drilled shafts. In these tests, vibratory motions of drilled shafts are interpreted, which induced by impacts on the shaft head. In applying the tests to evaluating integrity of shaft, it has been attended whether the tests have resolutions enough to distinguish existence of slime at between the shaft end and a bearing soil deposit. To distinguish existence of slime by tests, modes of shaft vibrations need to be reasonably interpreted, which generally vary according to a shaft boundary condition such as, a free-free or a free-fixed condition. The boundary condition of a shaft is, however, found to be significantly affected by stiffness of soil deposits around shaft as well as penetration depths of shaft into a bearing soil deposit. Thus, these effects on the boundary condition of a shaft should be considered reasonably in interpreting test results to decide the existence of slime. To investigate the effects, in this study, vibratory motions of shafts constructed in various soil conditions and end penetration depths are examined analytically. Based on the studies, variations of boundary condition are characterized in terms of soil stiffness contrast between a shaft perimeter and a shaft end, and also the ratio of a penetration depth to a shaft length. The results can be applied to verify the applicability of tests to identify the slime.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.2
• /
• pp.52-58
• /
• 2000

the quality of a TV is closely connected with the high quality surface of Braun tube. To get high quality surface an improved grinding system is needed. It has three main parts : the housing part of supporting frame the outershaft part rotat-ed by motor and the innershaft part having eccentricity from the rotation axis of the outershaft. the housing part and the outershaft part are connected by outerbearings, The outershaft part and the innershaft part are connected by innerbearings. Although the outershaft part is rotated at high-speed the innershaft part is not rotated by offset coupling. The high quality grinding surface can be obtained by this mechanism of panel surface grinder, Because the innershaft is unbalanced by eccentricity from rotation axis of outershaft the unbalancing vibration is resulted In this rotor system with high-speed rota-tion the unbalancing vibration makes the opertion unstable. In this research the transfer function is obtained bythe frequency response analysis of finite element model. The simu-lation result is proved by comparing with the experimental result measured by signal analyzer Then the results are corre-lated. in order to improve the design an optimization method is used instead of two-planes balancing method The parts of the 3-dimensional panel surface grinder satisfy the each constraint, The result shows that the design of the panel surface grinder can be optimized.