• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.325-330
• /
• 2000

The objective of this study is firstly to frame up the seismic safety of concrete gravity dams. It is necessary to analyze seismic response and evaluate seismic performance of concrete gravity dams during earthquake. In this study, seismic damage and dynamic analysis of concrete gravity dams using SAP2000 program are performed. Additional dynamic water pressure due to earthquake considered as additional mass for numerical seismic analysis. But, further research will be needed for the seismic stability of dams.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.449-450
• /
• 2003

Performance of photochemical models and their response to emission controls are heavily dependent on the inputs to the model. Two key inputs to these models are accurate meteorological and emissions data. But they can contain significant errors which contribute to uncertainties in photochemical simulation (Kumar and Russell, 1996; Sistla et al., 1996; Pielke and Uliase, 1998; Barna and Lamb, 2000; Nelson L. Seaman, 2000: Hogrefe et al., 2001; Biswas et al., 2001).(omitted)

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.7
• /
• pp.3213-3218
• /
• 2012

When patients with advanced breast cancer (ABC) are treated with neoadjuvant chemotherapy (NACT), efficacy is monitored by the extent of tumor shrinkage. Since their publication in 1981, World Health Organization (WHO) guidelines have been widely practiced in clinical trials and oncologic practice, for standardized tumor response evaluation. With advances in cancer treatment and tumor imaging, a simpler criterion based on one-dimensional rather than bi-dimensional (WHO) tumor measurement, named Response Evaluation Criteria in Solid Tumors (RECIST) was introduced in 2000. Both approaches have four response categories: complete response, partial response, stable disease and progressive disease (PD). Bi-dimensional measurement data of 151 patients with ABC were analysed with WHO and RECIST criteria to compare their response categories and inter criteria reproducibility by Kappa statistics. There was 94% concordance and 9/151 patients were recategorized with RECIST including 6/12 PD cases. RECIST therefore under-estimates and delays diagnosis of PD. This is undesirable because it may delay or negate switch over to alternate therapy. Analysis was repeated with a new criteria named RECIST-Breast (RECIST-B), with a lower threshold for PD (${\geq}10%$ rather than ${\geq}20%$ increase of RECIST). This showed higher concordance of 97% with WHO criteria and re-categorization of only 4/151 patients (1/12 PD cases). RECIST-B criteria therefore have advantages of both ease of measurement and calculations combined with excellent concordance with WHO criteria, providing a practical clinical tool for response evaluation and offering good comparison with past and current clinical trials of NACT using WHO guidelines.

• Speech Sciences
• /
• v.14 no.4
• /
• pp.157-167
• /
• 2007

In this paper, we implemented a single-chip speech recognizer using the TMS320C2000 DSPs. For this implementation, we had developed very small-sized speaker-dependent recognition engine based on dynamic time warping, which is especially suited for embedded systems where the system resources are severely limited. We carried out some optimizations including speed optimization by programming time-critical functions in assembly language, and code size optimization and effective memory allocation. For the TMS320F2801 DSP which has 12Kbyte SRAM and 32Kbyte flash ROM, the recognizer developed can recognize 10 commands. For the TMS320F2808 DSP which has 36Kbyte SRAM and 128Kbyte flash ROM, it has additional capability of outputting the speech sound corresponding to the recognition result. The speech sounds for response, which are captured when the user trains commands, are encoded using ADPCM and saved on flash ROM. The single-chip recognizer needs few parts except for a DSP itself and an OP amp for amplifying microphone output and anti-aliasing. Therefore, this recognizer may play a similar role to dedicated speech recognition chips.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.5
• /
• pp.595-599
• /
• 2000

Fine wool sheep (n=18) maintained in a tropical environment were allocated to three treatment groups. Estrus was induced with two injections of $PGF_{2{\alpha}}$ (10 mg. im) at 10 days interval. Superovulation treatment started 2 days prior to the second injection of $PGF_{2{\alpha}}$. Each ewe was treated with a total dose of 25 units FSH (Super-OV) i.m. every 12 hover 3 days; Group 2 were also injected i.m. with 200 IU PMSG at the first injection of FSH; Group 3 was treated as in Group 2 and also with GnRH ($4{\mu}g$ Buserelin) at the onset of estrus. The ewes in estrus were mated with a fertile ram. Ovarian examination and recovery of embryo and ova were performed at laparoscopy and laparotomy on day 3 or 4 after mating. Data for onset of estrus, duration of estrus, number of corpora lutea (CL), number of unnovulated large follicle (LF), embryo recovery rate, embryo quality and fertilization recorded for the 3 groups. Ewes in the Group 1 set in estrus later (p<0.05; $50.0{\pm}7.29h$) than the ewes in Group 2 ($24.5{\pm}3.58$) and 3 ($32.5{\pm}3.58h$). The duration of estrus, ovarian size and ovarian response (number of CL and LF) did not differ significantly (p>0.05) among the 3 groups. The proportion of ewes with a superovulatory response (${\geq}2$ CL) was the lowest (50%) in Group 1 treated with FSH alone but ova/embryo recovery (100%) and fertilization (100%) was significantly (p<0.05) higher than Group 2 (58.3 and 85.7%, respectively) and Group 3 (48.6 and 50%, respectively). It is concluded that in tropical fine wool sheep, there is no difference in the 3 treatments for yield of good quality embryos but ovarian response and ovulation rate increased on additional use of PMSG and GnRH respectively to FSH alone.

• Journal of Korean Institute of Industrial Engineers
• /
• v.38 no.1
• /
• pp.25-30
• /
• 2012

Desirability approaches have been proposed to find an optimum of multiple response problem. The existing desirability approaches use either of mean or min of individual desirability in aggregation of multiple responses. However, in order to find an optimum having high mean and low dispersion among individual desirability, the dispersion needs to be simultaneously considered with its mean. This study proposes bias and variance (BV) method which aggregates bias (ideal target-mean) and variance of individual desirability in multiple response optimization. The proposed BV method was applied to an example to evaluate its usefulness by comparing with existing methods. Evaluation results showed that the solution of BV method was a fairly good compared with DS (Derringer and Suich, 1980) and KL (Kim and Lin, 2000) methods. The BV method can be utilized to multiple response surface problems when decision makers want to find an optimum having high mean and low variance among responses.

• Earthquakes and Structures
• /
• v.8 no.5
• /
• pp.1241-1254
• /
• 2015

Spatially variable ground motions can be significant on the seismic response of a structure due to the incoherency of the incident wave. Incoherence of the incident wave is resulted from wave passage and wave scattering. In this study, wave passage effect on the response spectrum of a building structure built on a soft soil layer was investigated utilizing a finite element program of P3DASS (Pseudo 3-dimensional Dynamic Analysis of a Structure-soil System). P3DASS was developed for the axisymmetric problem in the cylindrical coordinate, but it is modified to apply anti-symmetric input earthquake motions. Study results were compared with the experimental results to verify the reliability of P3DASS program for the shear wave velocity of 250 m/s and the apparent shear wave velocities of 2000-3500 m/s. Studied transfer functions of input motions between surface mat foundation and free ground surface were well-agreed to the experimental ones with a small difference in all frequency ranges, showing some reductions of the transfer function in the high frequency range. Also wave passage effect on the elastic response spectrum reduced the elastic seismic response of a SDOF system somewhat in the short period range.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.619-624
• /
• 2000

Design of experiments based on Taguchi's orthogonal array is utilized for exploring the design space and for building response surface models of insulator and isolator database in order to facilitate the effective solution of multi-objective optimization commonly occurred in NVH problems. Response surface models, called engineering database of design space, provide an efficient means to rapidly model the trade-off among many conflicting NVH goals in automotive. In the design of insulator and isolator in automotive interior part, it is important not only to construct effective matrices of NVH but also to build up engineering database of current products. The experimental design especially based on orthogonal array and the nonlinear optimization algorithms are successfully used together to obtain the optimal design of insulator and isolator. The $2^{nd}$ order response surface models of absorption coefficient and insertion loss are constructed by using modified Taguchi's $L_{12}2^13^7$ orthogonal array and successfully used in optimal design of insulator and isolator.

• Journal of fish pathology
• /
• v.13 no.1
• /
• pp.31-36
• /
• 2000

The stress of consecutive blood collectings resulted in evident elevation of plasma glucose level and significant lowering of chemiluminescent response of peripheral blood phagocytes in sea bass (Lateolabrax japonicus). Fish responded to the consecutive stressors in cumulative manners. The plasma glucose level in response to consecutive stressors depended on the stressor intervals. When the plasma glucose level of individual fish was compared with the chemiluminescent response, statistically significant (P<0.05) negative correlations existed.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.5
• /
• pp.305-312
• /
• 2000

This study deals with the dynamic response of a rotor in Switched Reluctance Motor(SRM) caused by the unbalance force such as the unbalanced mass and electromagnetic force. The method to analyze the mechanical response of the rotor supported on the bearing is based on an extension of the 3-dimensional Transfer Matrix Method(TMM) coupled with the electromagnetic force calculated by Maxwell stress tensor. The displacement of the rotor as a function of frequency according to the position of the unbalanced mass is evaluated from the frequency response function (FRF). The rotor behaviour with the electromagnetic force is compared with that without the electromagnetic force. In addition, the resonance speeds and the vibration modes are analyzed and demonstrated in this paper. These results are useful in designing the mechanical rotor and in balancing properly the rotor to reduce vibration and noise.