• Advances in materials Research
• /
• v.6 no.2
• /
• pp.221-231
• /
• 2017

The concept design of the typha strawbale masonry came up as a result of the urgent demand for a means of constructing sustainable buildings, both in rural and urban settlement, not only suitable for dwellers but for keeping farm products by structures that will respond to the environmental eco-system, coupled with the fact that such structures are also affordable, durable and easy to maintain during their service period. The effects of contact between plaster and the stacked strawbale of a masonry needs to be established and design optimization for durability and stability of the masonry be obtained. The assessment will involve the application of plaster materials (cement and natural earth) to the wall specimen panels. Past works have shown that plastered strawbale walls have adequate resistance against the appropriate vertical loads, and further showed that the earth plaster can bear higher stress than the cement plastered straw bale. There is the implication that the collapse or response of the earth-strawbale wall is significantly higher compared to that of cement-strawbale from other straw-based masonries. Therefore the allowable stresses of plastered typha strawbale shall be predicted for their optimum values using SAP2000. The stress stability of each masonry is obtained by analytical model using the best fit variables for the wall height and thickness.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2000.11a
• /
• pp.99-107
• /
• 2000

With the results of calculation for natural frequencies, the forced reponses of coupled vibration of propulsion shafting were analysed by the modal analysis method. For the forced response analysis, axial exciting forces, axial damper/detuner, propeller exciting forces and damping coefficients were extensively investigated. As the conclusion of this study, some items are cleared as next. - The torsional amplitudes are not influenced by the radial excitation forces. - The axial vibrational amplitudes are influenced by the tangential exciting forces. An increase of amplitude is observed for the speed range in the neighbourhood of any torsional critical speed. - The coupling effect becomes larger if torsional and axial critical speed are closer together. - The axial exciting force of propeller is relatively strong, comparing with those of axial forces of cylinder gas pressure and oscillating inertia of reciprocating mechanism. Therefore, as a resume one can say, that- Torsional vibration calculation with the classical one dimension model is still valid. - The influence of torsional excitation at each crank upon the axial vibration is impotent, especially in the neighbourhood of a torsional critical speed. That means that the calculation of axial vibration with the classical one dimension model is insufficient in most of cases. - The torsional exciting torque of propeller can be neglected in most of cases. But, the axial exciting forces of propeller can not be neglected for calculating axial vibration of propulsion shafting.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.629-634
• /
• 2000

Generally, the accuracy of motion control systems is strongly influenced by both the mechanical characteristics and servo characteristics of feed drive systems. In the fed drive systems of machine tools that consist of mechanical parts and electrical parts, a torsional vibration is often generated because of its elastic elements in torque transmission. Especially, a torsional vibration caused by the elasticity of mechanical elements might deteriorate the quick movement of system and lead to shorten the life time of the mechanical transmission elements. So it is necessary to analyze the electromechanical system mathematically to optimize the dynamic characteristics of the feed drive system. In this paper, based on the simplifies feed drive system model, radius errors due to position gain mismatch and servo response characteristic have been developed and an optimal criterion for tuning the gain of speed controller is discussed. The proportional and integral parameter gain of the feed drive controller are optimal design variables for the gain tuning of PI speed controller. Through the optimization problem formulation, both proportional and integral parameter are optimally tuned so as to compensate the radius errors by using the genetic algorithm. As a result, higher performance on circular profile tests has been achieved than the one with standard parameters.

• Computers and Concrete
• /
• v.21 no.4
• /
• pp.385-397
• /
• 2018

This study is focused on the investigation for similitude the requirements between prototype and scaled models to determine the structural behavior of concrete load bearing systems. The scaling concept has been utilized in many engineering branches, has been assisted to engineers and scientists for obtain the behavior of the prototype by using scaled model. The scaling can be done for two purposes, either scaling up or scaling down depending upon the application. Because, scaled down models are the experimentation on scaled models is cheaper than huge structures. These models also provide facilities for experimental work. Similarity relationships between systems are created either by field equations of the system or by dimensional analysis. Within this study, similarity relationships were obtained by both methods. The similarity relations obtained are applied to different load bearing systems and it is determined that the similarity relation is a general expression. In this study, as an example, column, frame, cantilever beam and simple beam are chosen and 1/2, 1/5 and 1/10 scales are applied. The results are compared with the analytical results which are obtained by creating of the finite element models with SAP2000 software of different scaled load bearing systems. The analysis results of all systems are examined and it is determined that the scale factors are constant depending on the scale types for different load bearing systems.

• Journal of Yeungnam Medical Science
• /
• v.17 no.1
• /
• pp.1-11
• /
• 2000

Inhibition of cyclooxygenase(COX), and thus prevention of the formation of prostaglandins, provided a unifying explanation of the therapeutic and toxic actions of nonsteroidal anti-inflammatory drugs (NSAIDs). Recently, the discovery of the two isoforms of COX was made by molecular biologists studying neoplastic transformation in chick embryo cells. The constitutive enzyme, COX-1, is obviously responsible for the production of prostaglandins involved in housekeeping functions such as maintenance of integrity of the gastric mucosa, renal blood flow and platelet aggregation. The inducible form of COX (COX-2) is responsible for the formation of prostaglandins that pathologically affects inflammation, pain and fever. Clearly, all the experimental and clinical data support the hypothesis that the beneficial effects of NSAIDs are due to inhibition of the COX-2 enzyme, whereas the gastrotoxicity is due to inhibition of COX-1. The cox-2/COX-1 ratios of the NSAIDs in common use have been measured and compared with epidemiological data on their side effects. There is little evidence to suggest that one NSAID is clearly more effective than another, But substantial individual variability is present with respect to the pharmacology and pharmacokinetics of these drugs: therefore it is essential to adjust the dosage and choose specific drug to the patient's response.

• The Journal of Pediatrics of Korean Medicine
• /
• v.14 no.2
• /
• pp.47-60
• /
• 2000

The purpose of this research was to investigate the effects of Kami Kwiryong Tang (KKT) on the immune cells in BALB/c mice. KKT (500mg/kg) was administerd p.o. once a day for 7 days. KKT decreased the proliferation of thymocytes, but did not affect the proliferation of splenocytes. KKT enhanced the subpopulation of Th (CD4+CD8- single positive cells) cells in splenic T-lymphocytes, but decreased the subpopulation of Th cells in thymocytes. KKT enhanced the production of ${\gamma}$-interferon and interleukin-2, but did not affect the production of interleukin-4 in mice serum. KKT did not affect the production of nitric oxide, but enhanced the phagocytic activity in peritoneal macrophages. These results suggest that KKT is a potent prescription on immune response via the production of cytokines from splenic Th1 cells and the increase of phagocytic activity in vivo.

• The Journal of Asian Finance, Economics and Business
• /
• v.4 no.4
• /
• pp.51-60
• /
• 2017

India is the top recipient of workers' remittance flows; recent data indicate that the Remittances/GDP ratio has increased from 2.7% in 2000 to 3.36% in 2015. We apply a consumption behavior model, based on the "permanent income hypothesis", to estimate the consumption augmentation and the stability impact for the period of 1989-2014. The independent variables are: (i) real per capita income (exclusive of remittances) is the measure of "permanent income", (ii) remittances is the measure of "transitory income", and (iii) real interest rate as the indicator of consumers' ability for intertemporal consumption. The economic ramifications are important since current global risk factors could decrease flows in the future. The results indicate the significance of all three variables; there are: (i) evidence of significant consumption augmentation, (ii) consumption responds higher to remittances than to real income, the remittance elasticity is 0.571 and the income elasticity is 0.31, and (iii) evidence of pro-cyclical effect. The VAR model indicates some linkages and causality in the series that result in small response to the shocks. Policies to increase or stabilize remittance flows and to leverage remittances for economic development are important.

• Korean Journal of Cognitive Science
• /
• v.11 no.3_4
• /
• pp.73-81
• /
• 2000

This study was conducted to investigate some characteristics of representation of category knowledge and script knowledge. Using primed lexical decision task with higher level primers in the representation structure, Experiment 1 examined the interaction effects between knowledge type and concept typicality. It was found that the concept typicality has some effects in category representation, while it has no significant effect in script representation. In Experiment 2, primers of the lower hierarchy in the representation structure were employed. The results showed that the main effect of knowledge type was significant: the response time for category knowledge was faster than that for script knowledge. Typicality effect did not show in this experiment. The results of t the two experiments suggest that category knowledge is represented in hierarchy and typicality. while script knowledge may lack in that characteristics. Other aspects of the differences in characteristics of category- and script- knowledge representation were discussed,

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.3
• /
• pp.63-71
• /
• 2000

A new type of second-order digital peaking filters for professional-quality digital audio system is proposed whose frequency response can be elaborately controlled throughout the composite structure of a standard band-pass filter and a 0-dB bypass gain. The proposed method for designing the peaking filter uses the Q-compensation technique to prevent the Q-distortion caused by the variation of the gain factor and is reduced into a compact form which is proper to the real-time implementation. Methods are examined for computing its coefficients, which are exact and very straightforward to compute with small amount of the system resources.

• Korean Journal of Human Ecology
• /
• v.9 no.4
• /
• pp.491-503
• /
• 2000

The purpose of this study is to investigate the purchase behavior, response, and complaining behavior for discounting claims in clothing products. The subjects are composed of 360 female consumers. Data were collected through questionnaire. Descriptive analysis was used for analysis of this study. The findings of this study were as follows: First, female consumer used department store for buying discount apparel products the most. The percentage of buying casual or sports wear for discounting was the most. Most consumers purchased clothing products when discounting at 20-40 percentages. Second, even if, consumers tended to distrust discounting claims, they were satisfied with discount apparel products. Especially, they were satisfied with price, design, color, and size, while they were dissatisfied with sewing and fabric in discount products. Third, most consumer knew the knowledge of consumer rights, but most dissatisfied consumers did not assert positive consumer's right. Therefore, marketer should increase the accessibility of their complaint receiving mechanism for dissatisfied consumers in retail environment.