• 한국전자파학회논문지
• /
• 제25권11호
• /
• pp.1190-1196
• /
• 2014

본 논문은 넓은 고도 범위와 낮은 측정 오차를 갖는 주파수 변조 연속파(FMCW) 레이더 고도계의 설계 방안을 제안한다. 측정 고도의 동적 범위를 줄이기 위해 전파 고도계의 송신 경로에 광 지연선을 적용하여 넓은 고도 범위를 얻을 수 있다. 송신 전력과 수신단 이득을 제어하여 또한 수신 전력의 동적 범위를 줄일 수 있다. 더불어, 직접 디지털 합성기를 사용하여 변조 선형성을 향상시키고, 기준 클럭 신호를 위상 고정 루프의 옵셋(offset) 주파수로 사용하여 위상잡음을 최소화함으로써 낮은 고도 측정오차를 갖는다.

• Journal of Radiation Protection and Research
• /
• 제28권4호
• /
• pp.291-298
• /
• 2003

The KN-12 transport cask has been designed to transport 12 PWR spent nuclear fuel assemblies and to comply with the regulatory requirements for a Type B(U) package. The containment boundary of the cask is defined by a cask body, a cask lid, lid bolts with nuts, O-ring seals and a bolted closure lid. The containment vessel for the cask consists of a forged thick-walled carbon steel cylindrical body with an integrally-welded carbon steel bottom and is closed by a lid made of stainless steel, which is fastened to the cask body by lid bolts with nuts and sealed by double elastomer O-rings. In the cask lid an opening is closed by a plug with an O-ring seal and covered by the bolted closure lid sealed with an O-ring. The cask must maintain a radioactivity release rate of not more than the regulatory limit for normal transport conditions and for hypothetical accident conditions, as required by the related regulations. The containment requirements of the cask are satisfied by maintaining a maximum air reference leak rate of $2.7{\times}10^{-4}ref.cm^3s^{-1}$ or a helium leak rate of $3.3{\times}10^{-4}cm^3s^{-1}$ for normal transport conditions and for hypothetical accident conditions.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.675-678
• /
• 2008

The effect of wave and current interactions on jet-like current flowing against waves was investigated based on numerical simulations. The numerical simulations are conducted by a combined model system of REF/DIF(a wave model) plus SHORECIRC(a current model) and a Boussinesq equation model, FUNWAVE. In the simulations, regular and irregular waves refracted due to the jet-like opposing current were focused along the core region of current, and the jet-like current was earlier spreaded when the waves had larger wave heights. The numerical results show that the rapid change of wave height distribution in transverse direction near current inlet plays a significant role to spread the jet-like current. In other words, the gradients of radiation stress forcing in transverse direction have a more significant effect on the jet-like current than its relatively small gradients forcing in flowing direction, which tend to accelerate the current, do. In conclusion, it is indispensible to take into account the interaction effect of wave transformation and current characteristics when waves meet the opposing jet-like current such as river mouth.

• 한국공작기계학회논문집
• /
• 제18권2호
• /
• pp.170-177
• /
• 2009

The objective of this study is to evaluate an acoustic emission (AE) source characterization and fracture behavior of the SM45C steel by using back-propagation neural network (BPN). In previous research Ref. [8] about k-nearest neighbor classifier (k-NNC) continuity, we used K-means clustering method as an unsupervised learning method for obtaining multi-variate AE main data sets, such as AE counts, energy, amplitude, risetime, duration and counts to peak. Similarly, we applied k-NNC and BPN as a supervised learning method for obtaining multi-variate AE working data sets. According to the error of convergence for determinant criterion Wilk's ${\lambda}$, heuristic criteria D&B(Rij) and Tou values are discussed. As a result, in k-NNC before fracture signal is detected or when fracture signal is detected, showed that produce some empty classes in BPN. And we confirmed that could save trouble in AE signal processing if suitable error of convergence or acceptable encoding error give to BPN.

• 정보보호학회지
• /
• 제29권6호
• /
• pp.13-22
• /
• 2019

기존의 NTFS, HFS+, Ext4와 같은 전통적인 파일시스템들은 디스크 사용, 공간 관리, 데이터 암호화 등 여러 측면에서 한계점을 가지고 있었다. 특히 디스크 사용 측면에서 기본적으로 단일 디스크 안에서 동작하도록 설계되었기 때문에 여러 개의 디스크에서 동작하도록 하려면 RAID와 같은 별도의 구성이 필요했다. 이에 따라 주요 운영체제들은 위와 같은 기존 파일시스템들의 한계점들을 극복하도록 설계된 Pooled Storage 파일시스템들을 공개하였다. Pooled Storage 파일시스템에 관한 연구는 2017년 여름 미국 오스틴에서 열린 DFRWS 학회에서 독일의 Jan-Niclas Hilgert에 의해 발표된 이후 디지털 포렌식 학계 및 산업계에서 집중적인 연구개발이 진행되고 있다. 2017년 Hilgert는 ZFS 파일시스템에 대한 분석기능을 공개소프트웨어인 SleuthKit에 추가한 기술을 발표하였고, 2018년 DFRWS에서는 BtrFS 파일시스템에 대한 분석기능을 공개하였다. BlackBag Technologies의 Joe Syle은 APFS 파일시스템에 대한 분석기능을 SleuthKit에 추가한 결과를 DFRWS 2018에서 발표하였다. 노르웨이의 Rune Nordvik은 2019년 DFRWS에서 REFS를 역공학을 통하여 분석한 결과를 공개하였다. 국내에서는 고려대학교를 중심으로 ReFS에 대한 연구가 진행 중이다. 본 논문에서는 주요 운영체제들이 공개한 Pooled Storage 파일시스템 형태의 차세대 파일시스템인 ReFS, APFS, BtrFS를 소개하고 각 파일시스템의 특징과 주요 기능들을 설명한다.

• 아동학회지
• /
• 제37권1호
• /
• pp.7-16
• /
• 2016

Objective: It aimed at proposing the Korean Journal of Child Studies' strategy to be promoted to international journal based on the style and format of scholarly journals and journal metrics. Methods: The review of the journal in not only print version, but also an online version was done from the perspective of style and format. The total citation and impact factor were manually calculated from Web of Science Core Collection. Results: More professional level manuscript editing is required for maintaining the consistency of the style and format. The verso page and back matters should be improved to international level. Journal homepage should be reconstructed by adopting digital standards for the journal, including journal article tag suite, CrossMark, FundRef, ORCID, and text and data mining. To become an international journal, transformation into English journal and deposition to PubMed Central is mandatory. Conclusion: Since the editor's and society members' performance is top-notch, it will be possible to promote the journal up to international level soon. Society should guarantee the term of editor for enough time and support her with full cost and complete consent.

• 한국축산식품학회지
• /
• 제40권5호
• /
• pp.722-733
• /
• 2020

This study was aimed to investigate the physicochemical properties, texture, and antioxidant, and antimicrobial activities of regular-fat sausages (RFSs) mixed with 0.25 and 0.5% of oven-dried and freeze-dried grape tomato powder (GTP, 150 ㎛) during storage at 4℃. RFSs were made by six treatments that included: control (CTL), REF (sausages with 0.1% ascorbic acid alone), F1GTPSs (F1) and F2GTPSs (F2) (sausages with 0.25% and 0.5% freeze-dried GTP), and O1GTPSs (O1) and O2GTPSs (O2) (sausages with 0.25% and 0.5% GTP oven-dried at 100℃). Sausages with added oven-dried grape tomato powders (OGTPs) showed decreased pH, lightness (L^⁎), total plate count (TPC), and thiobarbituric acid-reactive substances (TBARS) compared to the sausages mixed with freeze-dried GTP (FGTPSs), but also had the highest redness (a^⁎) and yellowness (b^⁎) values among the treatments. With increasing levels of GTP, the hardness and chewiness of the sausages gradually decreased and these were decreased more in the FGTPSs (F) than in the OGTPSs (O). Compared to the FGTPSs, OGTPSs had higher antioxidant and antimicrobial activities, which extend the shelf-life of meat products. Application of OGTP to RFSs resulted in higher lipid antioxidant, antimicrobial activities, improving physicochemical properties and extended the shelf-life.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.132-134
• /
• 2018

본 논문은 태양광발전 시스템에서 P&O 방식 기반의 제어 기법인 duty 제어와 전류 제어 방식의 최대전력점 추종특성을 동일모드 조건에서 비교하였으며, 시뮬레이션 및 실험을 통해 검증하였다. Duty 제어 방식은 P-V 특성곡선을 이용하여 전력과 전압의 변화량을 통해 duty 증감을 결정함으로써 동작점을 결정한다. 이와 달리, 전류 제어 방식은 P-I 특성곡선을 이용하여 전력과 전류의 변화량을 통해 전류 지령치를 생성하고 비례-적분제어기를 통해 전류제어를 수행하여 동작점을 결정한다. 두 가지 제어 방식의 정확한 비교를 위해 등가의 ${\Delta}duty$ 및 ${\Delta}I_{ref}$의 값을 선정하여 모드 변화에 따른 ${\Delta}V$의 변화를 동일하게 맞추었다. DC - DC 부스트 컨버터를 이용하여 시뮬레이션과 실험에 두 제어 방식의 태양광발전 시스템을 구성하여 태양광 전압과 전류, 에너지 측면에서 특성을 비교하였다. 최대 전력점이 1.7kW인 특성곡선 조건 하에서, 시뮬레이션과 실험의 결과로 두 방식은 동일 MPPT 모드 시 동일한 동작점에 존재하며, 같은 값의 전력을 출력하여 동일한 성능의 효율을 보임을 검증하였다.

• 한국통신학회논문지
• /
• 제21권7호
• /
• pp.1850-1860
• /
• 1996

We present the results for the design ofantireflection (AR) coatings on facets of a multilayered structure waveguide device. The method, whose results agree very well with the reusults of the rigorous method in the case of a symmetric three layer structure deveice, is extended for the design of AR coatings on the facets of a multilayered structure waveguide device. the field profile in a multilayered structure waveguide necessary for the use of the extended method is obtained from the transfer matrix method. The virtual four layered structure method (VFLM) is proposed to reduce the time for the design ofAR coatings because the time for the design of AR coatings using the extended method increases as the number of layers increases. The optimum coating parameters and tolerance mapsfor two different six layered waveguide devices in Ref. [9] and [10] are obtained using the extendedmethod and the VFLM,and for the three different cases approximated as three layered waveguide devices to compare the results of each case. The results of the VFLM are similar to those of the extended methodcompared to those of the three layered structure waveguide. The main reason for the above results is that the field profile in the device calculated usingthe VFLM is similar to that calculated using the extended method compared to that for three layered structure wavegjide. We conclude that the extended method or VFLM should be used for the design of AR coatings on facets of a deice required for the facet reflectivity less than 10$^{-3}$ such as a semiconductor otical amplifier.

• 제어로봇시스템학회논문지
• /
• 제11권8호
• /
• pp.726-732
• /
• 2005

This paper proposes an autolanding guidance and control algorithm with the lateral guidance law. This algorithm is basically formulated and designed in feedback linearization based on singular perturbation. Main features of this algorithm are two facts. One of those is that when a certain situation happens that airplane must realign to the runway suddenly assigned due to unexpected environment change around the landing site, the heading guidance in this algorithm is very valuable, and the other is the fact that the inner loop control of this algorithm is able to be designed directly based on the Handling Quality Requirements that most flight control systems must be satisfied with. To illustrate the potential of this algorithm, 6-DOF nonlinear simulation based on the nonlinear airplane model shown in Ref.[11] is carried out. The simulation results showed that the altitude response to the given landing trajectory is accurate, and the airplane heading alignment to the assigned runway from the lateral deviation is successful. It is noted that this algorithm is also applicable to unmanned aerial vehicle, which can be retrieved in autolanding technique, where the runway far retrieving the vehicle is in any direction for example at war field.