• Journal of applied mathematics & informatics
• /
• v.12 no.1_2
• /
• pp.155-164
• /
• 2003

A method is proposed to predict the distances between given residue pairs (between C$\sub$${\alpha}$/ atoms) of a protein using a sequence to structure mapping by indefinite quadratic approximation. The prediction technique requires a data fitting in three dimensional space with coordinates of the residues of known structured proteins and leads to a numerical ref resentation of 20 amino acids by minimizing a large least norm iteratively. These approximations are used in distance prediction for given residue pairs. Some computational experience on a test set of small proteins from Brookhaven Protein Data Bank are given.

• Journal of Power Electronics
• /
• v.18 no.3
• /
• pp.826-840
• /
• 2018

This paper presents a distributed maximum power point tracking (DMPPT) algorithm based on the reference voltage perturbation (RVP) method for the PV modules of a series PV string. The proposed RVP-DMPPT algorithm is developed to accurately track the maximum power point (MPP) for each PV module operating under all atmospheric conditions with a reduced hardware overhead. To study the influence of parameters such as the controller reference voltage ($V_{ref}$) and PV current ($I_{pv}$) on the PV string voltage, a small signal model of a unidirectional differential power processing (DPP) based PV-Bus architecture is developed. The steady state and dynamic performances of the proposed RVP DMPPT algorithm and small signal model of the unidirectional DPP based PV-Bus architecture are demonstrated with simulations and experimental results. The accuracy of the RVP DMPPT algorithm is demonstrated by obtaining a tracking efficiency of 99.4% from the experiment.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.138-141
• /
• 2004

Finite element method is very effective method to simulate the forming processes with good prediction of the deformation behaviour. For the finite element modeling of sheet mental forming the accurate tool model is required. Due to the geometrical complexity of real-size part stamping tools it is hard to make FE model for real-size auto-body stamping parts. In this paper, it was focussed on the drawability factors on auto-body panel stamping by AUTOFORM with using tool planing alloy to reduce law price as well as high precision from Design Optimization of die. According to this study, the results of simulation will give engineers good information to access the Design Optimization of die.

• International Journal of Aeronautical and Space Sciences
• /
• v.5 no.2
• /
• pp.62-70
• /
• 2004

CFD method has been coupled with a time-marching free-wake model by usingfield velocity approach suggested by J. D. Baeder (Ref. 1). The coupled method hasbeen applied to rectangular and BERP-like blades and the calculated perfonnance dataare compared with the experimental results.For hovering analysis, the present method could yield sufficiently good resultswith reasonable computation time and is particularly suitable for the flow fieldanalysis with the complex shaped blade.

• Mass Spectrometry Letters
• /
• v.1 no.1
• /
• pp.5-8
• /
• 2010

In the present study, collisionally-activated dissociation (CAD) experiments were performed under low energy collision conditions in six peptides containing a disulfide bond. Fragments produced as a result of the cleavage of a disulfide bond were obtained after CAD in four peptides (bactenecin, TGF-$\alpha$, cortistantin, and linearly linked peptide, Scheme 1) with basic amino acid residues. In contrast, the CAD analysis of two peptides with no basic residue (oxytocin and tocinoic acid) rarely produced fragments indicative of cleavage of a disulfide bond. These results are consistent with the mobile proton model suggested by the McLuckey and O'air groups (ref. 22 and 23); nonmobile protons sequestered at basic amino acid residues appear to promote the cleavage of disulfide bonds.

• Journal of Magnetics
• /
• v.18 no.2
• /
• pp.178-182
• /
• 2013

We have developed a new non-conventional electron paramagnetic resonance (EPR) spectrometer, in which no resonant cavity was used. We previously demonstrated a wide frequency range operation of an EPR spectrometer using two loop antennas, one for a microwave transmission and the other for signal detection [1]. In contrast to Ref. [1], the utilization of a microstrip antenna as a transmitter enhanced a capability of wide-band operation. The replacement of conventional capacitors with varactor diodes makes resonance condition easily reproducible without any mechanical action during tuning and matching procedure since the capacitance of the diodes is controlled electronically. The operation of the new EPR spectrometer was tested by measuring a signal of 1,1-diphenil-2-picrylhydrazyl (DPPH) sample in the frequency range of 0.8-2.5 GHz.

• Language and Information
• /
• v.11 no.2
• /
• pp.67-86
• /
• 2007

The semantic literature on definiteness and specificity shows that the former is relatively an established notion, whereas the latter is still a vague notion that needs to be more clarified and confirmed. Given this, Ionin (2006) argues for the reality of specificity based on the informal use of this. She proposes this in spoken English as a specificity marker which has a semantic feature indicating "peaker intent to refer" and "noteworthiness." She also provides as evidence the results of some crosslinguistics studies including an L2 acquisition study with both L1-Russian and L1-Korean L2-English learners. However, this paper will argue that the informal use of this does not seem to mark specificity according to Ionin's definition of specificity. It will also be argued that the L2 acquisition study cannot be used as evidence for the reality of specificity. Based on these arguments, this paper will try to redefine specificity, based on the notions of existence and uniqueness.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10c
• /
• pp.49-51
• /
• 2001

현재 국내의 시각 관련 전문가들이 일반적으로 사용하는 자동 시각 굴절력-곡률계(Auto Ref-Keratometer)는 대부분 일본 제품들을 포함하는 외국산들이다. 최근 국내에서도 일부 기업에서 시각 측정기 부문에서의 개발을 행하고 있으나 아직 외국 제품들에는 정확도, 성능 등에서 크게 미흡한 수준을 보이고 있다 이에 좀 더 개선된 성능의 광학 부문, 소프트웨어 부문, 전자 하드웨어 부문등이 요구되고 있다. 이에 본 연구에서는 하드웨어의 변경 없이 전자 부문 소프트웨어의 다양한 변경을 가할 수 있도록 해 주어 개발 기간을 크게 줄일 수 있고 고객 데이터베이스 구축 등의 응용 확장도 가능하도록 범용성을 갖추 자동 시각 굴절력 곡률계의 전자 부문 하드웨어를 설계하였다. 본 전자 부문 하드웨어 시스템은 동시 개발 중인 광학 부문, 전자 부문 소프트웨어와 연동되어 외국 제품에 비교시 정확도와 성능면에서 근소하나마 향상된 결과를 낼 수 있게 하였을 뿐 아니라 향후 발전 가능성도 크게 향상시킬 수 있었다.

• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.451-456
• /
• 2005

The mathematical model for the heat exchangers of absorber and desorber is made in the elementary control volume method and the thermodynamic properties of working fluid. water/ammonia mixture. are calculated by some fundamental subroutines in RefProp 7.0 and flash subroutines made by authors The simulation results show that two-stage cycle has higher COP than single stage if temperature lift is high: the performance of single stage compression cycle can be improved by increase of absorber pressure. but the performance of two-stage compression cycle can not be improved in this way : the compressor discharging temperature of two-stage compression is much lower than that of single stage cycle. which is very important to the safety operation of CA heat pump. Major parameter comparison between the cycles at their optimal configurations is also given.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.522-527
• /
• 1997

A total of 386 critical flow data points from 19 runs of 27 runs in the Marviken Test were selected and compared with the predictions by the correlations based on the critical flow scaling parameters. The results show that the critical mass flux in the very large diameter pipe can be also characterized by two scaling parameters such as discharge coefficient and dimensionless subcooling( $C_{d, ref}$ and $\Delta$ $T^{*}$$_{sub}$). The agreement between the measured data and the predictions are excellent.t.ons are excellent.t.