• Journal of Nutrition and Health
• /
• 제34권1호
• /
• pp.54-61
• /
• 2001

The Ca and P balance studies were carried out with two different diets varying Ca levels : the current Korean RDA level(normal Ca diet) and the high level (High Ca diet) which was determined by adding 2SD to mean Ca intake of all subjects. The subjects were sever healthy adult woman, aged from 25 to 32 years old. The metabolic studies were conducted for two weeks with a days recess in between : during the fist week with normal Ca diet and during the second week with high Ca diet. The composition of nutrients excepting Ca of both diets was similar to subjects usual intake. The result were summarized as follows: Mean daily Ca intake was 728.8mg from norma Ca diet and 945.5mg from high Ca diet. Fecal excretion of Ca increased significantly(p<0.05) on high Ca diet, but urinary excretion of Ca did not show any differences between the two diet periods. There were also no significant differences in Ca retention between the two diet periods but it tended to be greater during high Ca diet period: 112.1mg/day during normal Ca diet period vs 208.2mg/day during high Ca diet period. Mean apparent Ca absorption was 41.2% on normal Ca diet and 42.1% on high Ca diet, indicating it was not affected by high Ca intake level used in this study. On the contrary, P retention was significantly increased up to 109.4mg/day with high Ca diet as compared to- 41mg/day with normal Ca diet. There were no significant differences in fecal and urinary excretion of P but those to be lower during high Ca diet period. The above results showed that higher Ca intake more than current RDA(700mg/day), in the level of 945.5mg/day, could increase Ca retention through Ca absorption comparable to the rate appeared on RDA level intake. P retention was also improved by high Ca intake. Therefore, higher Ca intake than the current RDA level seemed to produce favorable effects on bone health in adult women. However, the current RDA level seemed to be relatively appropriate, considering the results that all the subjects but one maintained positive Ca balance with normal Ca diet. (Korean J Nutrition 34(1):54-61, 2001)

• 한국진공학회지
• /
• 제20권5호
• /
• pp.345-355
• /
• 2011

GaAs나 InP 기반의 high electron mobility transistor (HEMT) 소자들은 우수한 마이크로파 및 밀리미터파 주파수 특성 및 이에 따른 우수한 저잡음 특성을 가지고 있다. GaAs 기판 위에 점진적으로 성장된 메타몰픽(Metamorphic) HEMTs (MHEMTs)는 InP 기판 위에 성정한 HEMT에 비해 비용 측면에서 커다란 장점을 가지고 있다. 본 논문에서는 이러한 MHEMT의 DC/RF 소신호 특성을 예측하기 위하여 InAlAs/InGaAs/GaAs MHEMT 소자들의 DC/RF 소신호 주파수 특성을 시뮬레이션하였다. 2차원 소자 시뮬레이터의 hydrodynamic 전송 모델을 사용하여 $In_{0.52}Al_{0.48}As/In_{0.53}Ga_{0.47}As$ 이종접합 구조를 갖는 제작된 0.1-${\mu}m$ ${\Gamma}$-게이트 MHEMT 소자에 대하여 파라미터 보정 작업을 수행한 후, MHEMT 소자들에 대해 DC 특성 및 RF 소신호 주파수 특성을 시뮬레이션하고 실험 데이터와 비교 분석하였다. 또한, 게이트 리세스 구조에 따른 MHEMT 소자들의 DC/RF 특성을 시뮬레이션하고 비교 분석하였다.

• 한국추진공학회지
• /
• 제10권4호
• /
• pp.26-33
• /
• 2006

우주 발사체에서 고밀도 추진제를 사용함으로써 추진제 저장 탱크의 소형화에 따른 구조비 향상으로 발사체 성능 측면에서 이득을 볼 수 있다. 한국의 우주 발사체 개발에서는 로켓 연료로 발사체 선진국에서 사용하는 탄화수소계 연료인 RP-1이나 RG-1보다 밀도가 낮은 Jet A-1을 연료로 사용한다. 본 논문에서는 탄화수소계 연료 고밀도화의 일환으로 개발된 두 종류의 연료에 대해 수류시험, 연소시험 결과를 제시하고 그 결과를 Jet A-1과 비교하였다. 결론적으로, 두 종류의 고밀도 연료는 Jet A-1과 동등하거나 높은 연소성능을 나타내었으며 외부혼합형 분사기에서 연료 간 성능차이가 더 뚜렷하게 나타났다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.149-152
• /
• 2008

30톤급 액체로켓엔진 실물형 연소기의 형상에 따른 연소특성속도에 대한 연구를 수행하였다. 본 연구에서 연소기의 형상은 연소기 헤드와 분리가 가능한 내열재 및 채널 냉각형 연소실(${\varepsilon}$=3.2), 그리고 일체형인 팽창비가 각각 3.5와 12인 재생냉각형 연소기이다. 연소압력은 약 53${\sim}$60 bar 그리고 추진제 유량은 약 89 kg/s이고, 적용된 분사기는 리세스수가 1.0인 동축 와류형이다. 설계점 연소시험에서 팽창비가 12인 일체형 재생냉각 방식의 연소기가 가장 큰 연소특성속도를 보였는데 이는 추진제인 케로신이 분무되기 전 챔버 냉각으로 인한 온도 상승에 따른 엔탈피의 증가 및 연소압력의 증가에 기인한 것이다.

• Child Health Nursing Research
• /
• 제10권1호
• /
• pp.22-28
• /
• 2004

Purpose: The purpose of this study was to identify the effect of hand acupuncture on reduction of headache. Method: This study used a quasi-experimental pre-test and post-test design. 45 middle school girls who complained of headache were selected as subjects. The study lasted from November 2002 to June 2003. There were 22 girls in the experimental group while 23 girls were control group; convenience assignment was used. The two groups were homogeneous on characteristics. The experimental group received hand acupuncture. The treatment was to puncture corresponding points (A33, B27, M1, I2) on both the palm and the back of a hand with disposable acupuncture needles, and then remove them after a 20-30 minutes recess during which the subjects reclined on a bed. The data were analyzed using the SPSS PC with Fisher's Exact -test, and Mann Whitney U-test. Result: The results of this study were as follows: 1) In the experimental group, objective pain decreased after hand acupuncture (U= -2.51, p= .01). As for the objective pain degree, a significant reduction in voice change was observed in the experimental groups (U= -2.35, p= .02). Facial expressional changes were observed (U= -1.87, p= .06) and perspiration degree (U= -.99, p= .32) has reduced. However, these differences were not statistically significant between the experimental and control group. 2) Subjective pain degree decreased after hand acupuncture in the experimental as compared to the control group. 3) No statistical significant difference in comfort (U= -.29, p= .78) or distress (U= -1.51, p= .13) between experimental and control group were found. Conclusion: These findings indicate that hand acupuncture is an effective method for reducing headache. Therefore, hand acupuncture can be considered as an independent nursing intervention for headache reduction.

• 한국군사과학기술학회지
• /
• 제9권4호
• /
• pp.137-144
• /
• 2006

단일요소 분사기(35kgf급)의 성능시험을 통해서 입증된 recess 2mm의 축소 모사된 로켓엔진(지상추력 250kgf급 다중요소 스월 동축형 분사기)을 설계, 해석, 제작, 시험하고, 이를 통하여 주요한 설계변수에 대한 검증과정을 수행하였다. 단일요소 및 다중요소 인젝터의 분무현상을 수치 해석적으로 모사하여 중첩에 의한 분무의 변화를 해석적으로 고찰하고 적용성 및 타당성을 확인하였다. 그리고 다중요소 분사기에 대한 연소성능시험을 통하여 엔진의 정상 연소성능을 평가하고 이를 단일요소 인젝터의 연소성능과 비교하여, 대형 로켓개발에 앞서 필요한 각 축소모델에 대한 특정 스케일에서의 다중요소 인젝터에 의한 연소성능을 평가하고 설계 자료를 확보, 합리적인 분사기 설계 변수자료를 확립하였다.

• 한국환경보건학회지
• /
• 제13권2호
• /
• pp.25-33
• /
• 1987

This study was carried out to evaluate student exposures to dust in classroom of middle schools. A total of four schools, such as two in an urban and two in a rural area, were selected for this study. In this study, airborne dust concentrations were measured during a period from July 8 to July 18, 1986. Additional measurements of dust concentrations were conducted from November 4 to 7, 1986 to compare the results by seasonal variation. The results of this study were as follows. 1. Respirable dust concentrations were measured by both filtration method (C mg/m$^3$) and Digital Aerosol Monitor (cpm) to calculate anexchange factor K. K- value was 0.159 as follows. $K=\frac{c}{cpm} = \frac{2.71}{17.09} = 0.159$ 2. In summer when windows were opened, the concentrations of airborne respirable dusts measured by filter sampling method were 0.54-1.37 mg/m$^3$ in the morning and 0.79-1.75 mg/m$^3$ in the afternoon. Thus, higher levels were indicated in the afternoon. Meanwhile, the concentrations of airborne respirable dusts measured in winter were approximately twice as high as those in summer. 3. The highest dust concentrations were determined in School D which is a coeducational school with classroom of concrete floor. Walking roads in School D were not paved and students did not wear indoor-shoes. Dust levels in School D were approximately twice as high as levels in School B. All of the measured dust levels in four schools exceeded Korean Standard for outdoor air, 0.3 mg/m$^3$ for 24 hours. Results by Digital Aerosol Monitor indicated that there was no significant difference in dust levels among grades. The concentration of airborne dusts in the classroom was 1.5-3.0 times higher than that in the hall way. The concentration of airborne dusts during recess was 1.3-1.6 times higher than that during class. In winter, the dust concentrations during clean-up exceeded the permissible exposure limit, 10 mg/m$^3$ (as total dusts), for occupational exposures. 4. The concentrations of total dusts measured in winter were 1.5-2.4 times higher than those of respirable dusts measured simultaneously.

• 한국전산유체공학회지
• /
• 제21권1호
• /
• pp.50-57
• /
• 2016

In various industries related with construction and military machinery, a large amount of power is normally required because such machinery operations, such as digging or breaking, take place under difficult working conditions in a rough environment. Thus, a hydraulic system needs to be applied as the major power transfer system. To produce and supply hydraulic power depending on the various load conditions, a hydraulic piston pump is utilized as a typical power source for a hydraulic system. In the present study, numerical simulations were conducted using the commercial program, Ansys CFX 14.5. To lubricate the moving parts as the pump starts to operate, a small amount of oil leaks out through the clearance between the orifice in the piston-shoe and the recess at the swash-plate. Taking this into consideration, a cylindrically shaped computational domain was modeled to maintain the same equivalent leakage area. To validate the numerical method applied herein, the numerical results of the flow rate at the discharge port were compared with the experimental data, and a good agreement between them was shown. Using the verified method, the effects of the discharge pressure and the angle of the swash-plate were also evaluated under several load conditions. The results of the present study can be useful information for a hydraulic piston pump used in many different manufacturing industries.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.139-143
• /
• 2007

추가 30톤급 액체로켓엔진 실물형 연소기에서 수행했던 연소시험의 전반적인 성능결과에 대해 기술하였다. 연소기 연소압력은 약 53${\sim}$60 bar 그리고 추진제 유량은 약 89 kg/s이다. 30톤급 실물형 연소기는 연소기 헤드, SUS 배플, 배플분사기, 내열재 연소실, 냉각채널 연소실 그리고 재생냉각 연소실 등으로 구성하였다. 연소특성속도는 약 1673부터 1730 m/sec이며, 비추력은 약 254에서 263 sec 정도의 값을 얻었다. 일반적으로 분사기의 RN 증가에 따라 연소특성속도는 증가하였다. 또한, 연소기의 비추력은 연소특성속도 증가에 따라 증가함을 보여 주었다.

• 한국추진공학회지
• /
• 제14권3호
• /
• pp.52-60
• /
• 2010

이중와류 동축형 분사기가 사용된 추력 30톤급 액체로켓엔진 연소기의 연소안정성시험을 강제교란방법을 이용하여 국내 지상연소시험설비에서 수행하였다. 시험에는 분사기 리세스 수, 배플 길이, 막냉각 및 연소실 직경과 같은 설계 요소가 변경된 연소기가 사용되었으며 시험결과는 이 변수들이 액체로켓엔진 연소기의 고주파 연소안정성과 깊은 관계가 있음을 보여주었다. 강제교란에 의한 액체로켓엔진 연소기의 연소안정성 분석에 있어서 감쇠시간 대신 진동 감분을 사용한 결과로부터 감쇠인자의 증가는 액체로켓엔진 연소기의 고주파 연소안정성 향상에 영향을 미침을 확인하였다.