• Electrical & Electronic Materials
• /
• v.7 no.5
• /
• pp.376-382
• /
• 1994

In this study we developed a program(DEVSIM) to simulate the two dimensional distribution of the electrostatic potential and the electric field of the arbitrary structure consisting of GaAs/AlGaAs semiconductor and metal as well as dielectric. By the comparision of the electric field distribution of GaAs MESFETs with the various recess gates we proposed a suitable device structure to improve the breakdown characteristics of MESFET. According to the results of simulation the breakdown characteristics were improved as the thickness of the active epitaxial layer was decreased. And the planar structure, which had the highly doped layer under the drain for the ohmic contact, was the worst because the highly doped layer prevented the space charge layer below the gate from extending to the drain, which produced the narrow spaced distribution of the electrostatic potential contours resulting in the high electric field near the drain end. Instead of the planar structure with the highly doped drain the recess gate structure having the highly doped epitaxial drain layer show the better breakdown characteristics by allowing the extention of the space charge layer to the drain. Especially, the structure in which the part of the drain epitaxial layer near the gate show the more improvement of the breakdown characteristics.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.451-454
• /
• 2006

This paper describes the results of cold flow test and hot firing tests of an uni-element coaxial swirl injector and hot firing tests of a subscale combustor, as to the development effort of coaxial swirl injector for high performance liquid rocket engine combustor. A major design parameter for coaxial swirl injector is the recess number of a bi-swirl injector. The results of hot firing tests of the uni-element injector combustor and the sub-scale combustor are analyzed to investigate the effect of the recess number influencing on the combustion performance and pressure fluctuation. The test results of a cold flow test of the unielement combustor shows that it was shown that the change in recess number has significant effect on mixing characteristics and efficiency, while the effect of recess number on atomization characteristic is not The results of a series of firing tests using unielement and subscale combustor show that the recess length significantly affects the hydraulic characteristics, the combustion efficiency, and the dynamics of the liquid oxygen/kerosene bi-swirl injector. As a point of combustion performance, combustion efficiencies are 90% for unielement combustor and 95% for subscale combustor. The difference in the characteristic velocities between the unielement combustor and the subscale combustor may be caused by the difference in thermal loss to the combustor wall and the relative lengths of the combustion chamber. For a mixed type coaxial swirl combustor, the pressure drop across the injector increases as recess number becomes larger. The low frequency pressure fluctuation observed in unielement combustor can be related to the propellant mixing characteristics of the coaxial bi-swirl injector. The effect of the recess number on the pressure fluctuation inside the combustion chamber is more significant in un i-element combustor than the subscale combustor, of which the phenomena are also observed in time domain and frequency domain.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.9
• /
• pp.644-650
• /
• 2003

In this paper, we have studied characteristics of PHEMT's fabricated by two difference types of gate recess for improving performance of the device in millimeter wave applications. PHEMT's were fabricated using wide and narrow recesses. Maximum transconductance(g$_{m}$) of PHEMT's using the wide recess was 332.7 mS/mm, and that of PHEMT's using narrow recess was 504.6 mS/mm. From small signal performance measurements, cutoff frequency(f$_{T}$) and maximum stable oscillation frequency(f$_{max}$) of PHEMT's using wide recess were 113 GHz and 172 GHz, respectively. f$_{T}$ and f$_{max}$ of PHEMT using narrow recess were 101 GHz and 142 GHz, respectively. The measured data of the fabricated PHEMTs' were carefully studied and analyzed.d.tudied and analyzed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.1
• /
• pp.47-59
• /
• 2022

Four swirl coaxial injectors with different recess lengths were manufactured using an additive manufacturing method. Single-injection and bi-injection cold-flow experiments were performed using water and air as simulated propellants in an atmospheric pressure environment. According to the recess length and propellant flow conditions, the injection pressure drop and discharge coefficient were investigated, and the breakup length and spray angle were measured using an image processing technique. In the bi-injection pressure drop and discharge coefficient results, the liquid-side injector was not affected by the recess. For the gas-side injector, however, the injection pressure drop increased and the discharge coefficient decreased as the recess length increased. The breakup length in the single-injection increased with the increase of the recess, but decreased in the bi-injection.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.3
• /
• pp.17-24
• /
• 2016

The reacting flows of gaseous hydrogen/liquid oxygen 2D coaxial shear injector with varying recess length are numerically analyzed. The standard ${\kappa}-e$ model and laminar flamelet model are adopted for the steady turbulent combustion with the ideal and real gas equations. As the recess length increases, the recirculating region in the combustion chamber expands and the vorticity is intensified. Also, the variations of temperature, products, and pressure are strongly related to the recess length. The results show that an efficient combustor can be obtained by the introduction of the recessed injector.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.3
• /
• pp.9-17
• /
• 2006

The influences of recess length of a liquid/liquid swirl coaxial injector on spray characteristics were investigated. It was revealed that the internal impinging phenomenon played an important role in the spray characteristics, such as spray angle and breakup length. Also, as the recess length increased, the mean drop size increased due to the increase of effective film thickness and mixing efficiency increased, but in the case of very deep recess length, the mixing efficiency decreased.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.249-252
• /
• 2002

we have studied the characteristics of PHEMT's with gate recess etching method. The DC characterization of PHTMT fabricated with the wide single recess methods is a maximum drain current density of 319.4 ㎃/mm and a peak transconductance of 336.7 ㎳/mm. The RF measurements were obtained in the frequency range of 1~50GHz. At 50GHz, 3.69dB of 521 gain were obtained and a current gain cut-off frequency(f$_{T}$) of 113 CH and a maximum frequency of oscillation(f$_{max}$) of 172 Ghz were achieved from this device. On the other hand, a maximum drain current of 367 mA/mm, a peak transconduclancc of 504.6 mS/mm, S$_{21}$ gain of 2.94 dB, a current gain cut-off frequency(f$_{T}$) of 101 CH and a maximum frequency of oscillation(f$_{max}$) of 113 fa were achieved from the PHEMT's fabricated by the .narrow single recess methods.methods.

• Korean Journal of Poultry Science
• /
• v.27 no.3
• /
• pp.259-266
• /
• 2000

This study was carried out to investigate the embryonic developmental changes of the pineal gland during incubating period in the Korean pheasant. The pheasant embryos and fetuses were killed after 3, 4, 6, 9, 12, 15, 19 and 23 (hatching) days of incubation. The morphological characteristics of a pineal gland were determined in all embryos and fetuses using the whole - mount technique, light microscopy and morphometry. The time of the first apparition of the pineal anlage, as a derivative of the roof of the third ventricle, was fixed at 3 days of incubation. The pineal vesicles appeared as solid mammilliform projections, which subsequently presented a central lumen, at 4 days of incubation. The pineal parenchyma was composed of the tubular pineal recess, the lobules surrounded with septum originating from the capsule and the follicles possessed central lumen at 23 days of incubation. The length, width and area of the pineal gland were increased markedly at 9 and 15 days of incubation. These results suggest that the pineal recess has an important role in the pineal development after hatching.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.704-708
• /
• 2017

A spray characteristics is carried out in a numerical simulation of swirl coaxial injector. The water and nitrogen are the oxidizer and fuel is used in cold flow condition. The simulation is carried out in 3d model with varying recess length. Reynolds stress turbulence and volume of fluid model were chosen to perform the simulation. The spray characteristics have been investigated as well as the influence of the inlet swirl strength of the internal flow. Effect of recess length is studied for the axial and radial velocity decreased with a reduced length of inner injector due to the decline vortex intensity.

• Journal of the Korean Society of Radiology
• /
• v.81 no.6
• /
• pp.1364-1376
• /
• 2020

A pericardial recess is frequently seen in patients undergoing chest computed tomography (CT). It is important to be aware of the normal anatomy of the pericardium as it is often mistaken for normal variants and/or disease. Therefore, we will describe the anatomy and location of the pericardial recess and the specific findings in various diseases associated with the pericardial recess.