• Journal of Ginseng Research
• /
• v.32 no.2
• /
• pp.127-134
• /
• 2008

This study was carried out to investigate the changes of ginsenosides composition in Korean red ginseng water extract (RGWE) after heated with high temperatures above $100^{\circ}C$. RGWEs were adjusted with pH 3.0, pH 7.0 and pH 10.0, respectively, and then heated at 100,110 and $120^{\circ}C$ for 30 minutes by using autoclave. Total ginsenosides of RGWE treated with heating showed decreasing tendency when compared with control. By TLC analysis, decreasing effect of ginsenosides in RGWE were significantly observed in the acidic condition of pH 3.0, particulary. By HPLC analysis, total ginsenoside of control showed 1.89%, while those of RGWE treated with 100, 110 and $120^{\circ}C$ showed 1.22, 1.05 and 0.97%, respectively. The ratio of protopanaxadiol (PD) to protopanaxatriol (Pr) saponins in control was 1.89, while that of PD/PT in treated RGWEs were level of 1.33 to 1.47. By the result of decreased ratio of PD/PT in RGWE, it was considered that PD type saponin such as ginsenoside$-Rb_{1}$, $-Rb_{1}$, -Rc and -Rd was more unstable than PT type saponin such as ginsenoside-Re and Rg against high temperature heating above $100^{\circ}C$.

• Journal of Radiation Protection and Research
• /
• v.28 no.2
• /
• pp.87-95
• /
• 2003

The fabrication process and the structure of PIN semiconductor detectors have been designed optimally by simulation for doping concentration and width of p+ layer, impurities re-contribution due to annealing and the current distribution due to guard ring at the sliced edges. The characteristics to radiation response has been also simulated in terms of Monte Carlo Method. The device has been fabricated on n type, $400\;{\Omega}cm$, orientation <100>, Floating-Zone silicon wafer using the simulation results. The leakage current density of $0.7nA/cm^2/100{\mu}m$ is achieved by this process. The good linearity of radiation response to Cs-137 was kept within the exposure ranges between 5 mR/h and 25 R/h. This proposed process could be applied for fabricating a PIN semiconductor detector for measuring individual dose.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.2
• /
• pp.162-165
• /
• 2005

A series of fluorine and hydroxyl containing jasmonate derivatives, which were chemically synthesized in our institute, were investigated for their effects on the biosynthesis and heterogeneity of ginsenosides in suspension cultures of Panax notoginseng cells. Com-pared to the control (without addition of elicitors), $100{\mu}M$ of each of the jasmonate was added on day 4 to the suspension cultures of P. notoginseng cells. It was observed that, jasmonates greatly enhanced the ginsenoside content and the ratio of Rb group to Rg group (i.e. $(Rb_1\;+\;Rd)/(Rg_1\;+\;Re)$ in the P. notoginseng cells. Some of the synthetic jasmonates, such as pentafluoropropyl jasmonate (PFPJA), 2-hydroxyethyl jasmonate (HEJA) and 2-hydroxye-thoxyethyl jasmonate (HEEJA), could promote the ginsenoside content to $2.55\;\pm\;0.11,\;3.65\;\pm\;0.13\;and\;2.94\;\pm\;0.06$mg/100 mg DW, respectively, compared to that of $0.64\;\pm\;0.06$mg/100 mg DW for the control and $2.17\;\pm\;0.04$ mg/100 mg DW by the commercially available methyl jasmonate (MJA); and they could change the respective Rb:Rg ratio to $1.60\;\pm\;0.04,\;1.87\;\pm\;0.01\;and\;1.56\;\pm\;0.05$, compared to that of $0.47\;\pm\;0.01$ for the control and $1.42\;\pm\;0.06$ by MJA. The results suggest that suitable esterification of MJA with fluorine or hydroxyl group could in-crease the elicitation activity to induce plant secondary metabolism. The information obtained from this study is useful for hyper-production of heterogeneous products by plant cell cultures.

• Resources Recycling
• /
• v.29 no.6
• /
• pp.73-78
• /
• 2020

To use a tailing obtained from coal beneficiation as a raw material for glass material, the behaviors of phase transformation of the tailing was investigated according to sintered temperature with the addition of Na2CO3. As a result of the experiment, mullite was formed at 700~1,100 ℃, and the mullite and the cristobalite just only existed at 1,450 ℃. The glassification ratio of the coal tailing was to be 97.9 wt.% at 1,450 ℃ with the addition of Na2CO3 to tailing weight ratios of 10 wt.%. However, in the case of sample of coal tailing with 20 wt.% Na2CO3 added, nepheline(Na2O·Al2O3·2SiO2) was produced during the re-sintering(2nd sintering) at 1,100 ℃. From the results, the suitable addition amount of Na2CO3 for glassification of coal tailing was found around 10 wt.%.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.7
• /
• pp.557-570
• /
• 2014

The heat transfer, pressure loss, and thermal performance in a cooling channel were evaluated for various new fan-shaped pin-fin geometries using three-dimensional Reynolds-averaged Navier-Stokes equations. The turbulence was modeled using the low-Reynolds-number SST turbulence model in the Reynolds number range of 5,000-100,000. The numerical results for the area-averaged Nusselt numbers were validated by comparing them with the experimental data under the same conditions. A parametric study for three types of fan-shaped pin-fin geometries was performed with two parameters, namely, the leading and trailing reduction angles.

• Journal of Korean Library and Information Science Society
• /
• v.2
• /
• pp.1-21
• /
• 1975

Thc purposc of this .study is for ri~aking a model of building a library collcction dcnizn~cd on th.3 curriculum through thc inter-comparison of 15 standards for collcgc ant1 anivcrsily libraries in 5 countries (U. S. A.. Great Ikitain, Canada, Japan, and Icorca) Thc rcsult of thcscl colnpsrisons is as follow.. (1) Qu;~nlitalivc scope: of thc cull(:ction: (r/ Standards for a minimal collcction arc presented to about 100,000 vols (20-30 vols per student) for a ncw university and about 40,000 vols (40 vols pcr studcnt) for a nrnr collcge. $)$ Standards for a working collcction arc prescnted to 70-80 vols per student for a univer:aity and 50-60 vols per student for a college. $$ Standard for an intcnsive rescc~rch collcction is presented to morc than 100 vols p::r studcnt. (2) Stop: of the annual incrc;lsc cf thc collection: (i: Standard for a minimal collcction is ~~rescntcdto 1.4-2 vols per studcnt. $$ Standard for an intensive rrscarch or working collection is pcrsented to 4-5 vols pcr studcnt. (3) Scope of thc anni.1a1 budgetary standards: In Grcat I3ritain and U.S. A.. th-re aro assigned to 1 . 5 ~ 2 % of the collcge and university cxpcnditurr for books. $,$ In our country, it is prcscntcd to 3.5% of thc collcge and university expenditure for books, whcn my calculating by thc various factor analysis.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.5
• /
• pp.507-512
• /
• 2011

This study is concerned with the reliability analysis and its based design of midship section against the ultimate bending strength. Eight bulk carriers and seven oil tankers over 100m length are chosen for the present study. Target reliability indices for the two ship types have been derived based on the results reliability analysis of the present ship models. Reliability-based structural design codes are proposed for use in design of midship section of bulk carriers and oil tankers. The design codes proposed in this study have been successfully applied to re-design of midship section of the present ship types. It has been found that the proposed codes can provide more uniform structural design results.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.9
• /
• pp.1015-1021
• /
• 2004

Micro-resolution Particle Image Velocimetry(Micro-PIV) was used to measure the flow in a micro-branch(Micro-Bypass). In this paper, effects of particle lump at the tip of a Micro-branch and difficulties of Micro-PIV measurements for microfluidics with branch passage were described. Micro-bypass was composed of a straight channel(200(100)${\mu}$m width ${\times}$ 80${\mu}$m height) and two branches which has 100(50)${\mu}$m width ${\times}$ 80${\mu}$m height. One of branches was straight and the other was curved. Experiments were performed at three regions along streamwise direction(entrance, middle and exit of branch) and five planes along vertical direction (0, ${\pm}$10, ${\pm}$20 ${\mu}$m) for the range of Re=0.24, 1.2, 2.4. Numerical simulation was done to compare with the measurements and understand the effects of particle lump at the tip of branch. And another fluid(3% poly vinyl Alcohol aqueous solution) were adapted for this study, so there were no particle sticking. In this case, we could get velocity difference between straight and curved branches.

• Horticultural Science & Technology
• /
• v.30 no.3
• /
• pp.342-344
• /
• 2012

A new grafted cactus cultivar, called 'Hwangseon', Gymnocalycium mihanovichii, is a hybrid crossed between two orange color cultivars 'Geoseong' and 'Huhwang'. Mating was performed in the greenhouse of National Institute of Horticultural & Herbal Science (NIHHS) in 2005. The harvested seeds were sown at 100 mL volumetric flasks filled with 'Kyoto' medium. Seedling had been grafted into a young rootstock, Hylocereus trigonus, and cultured in vitro in 100 mL test tube for more than six months. After re-grafting and planting in the green house in 2006, their characteristics were evaluated three times until 2009. The new cultivar has a flat round shape and bright yellow skin color. In addition, it has 7 to 9 ribs with gray and straight spines on the body and produces an average of 12.3 offsets.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.35 no.2
• /
• pp.100-106
• /
• 2013

There are many challenges for reconstruction after intraoral tumor resection. Especially, palatomaxillary reconstruction has two primary goals: closure of the oronasal communication and re-creation of proper myomucosal function. Prosthodontic treatment using obturator and several surgical procedures are selected depending on the size and site of the defect, the difficulty of operative procedure, operation time and donor site problem. Above all, it is considered that radial forearm free flap is the first choice for palatal reconstruction. Our department introduces a novel method using tunnelized-facial artery myomucosal island flap for palatomaxillary defect reconstruction, which can successfully reduce donor-site morbidity, and duration of surgery and hospitalization.