Transactions of the Korean Society of Mechanical Engineers B (대한기계학회논문집B)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of Thermal Performances of Various Fan-Shaped Pin-Fin Geometries

다양한 부채꼴 핀휜 형상의 열성능 평가

  • Received : 2013.09.04
  • Accepted : 2014.05.09
  • Published : 2014.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

The heat transfer, pressure loss, and thermal performance in a cooling channel were evaluated for various new fan-shaped pin-fin geometries using three-dimensional Reynolds-averaged Navier-Stokes equations. The turbulence was modeled using the low-Reynolds-number SST turbulence model in the Reynolds number range of 5,000-100,000. The numerical results for the area-averaged Nusselt numbers were validated by comparing them with the experimental data under the same conditions. A parametric study for three types of fan-shaped pin-fin geometries was performed with two parameters, namely, the leading and trailing reduction angles.

본 연구에서는 삼차원 RANS 방정식을 이용하여 냉각 유로 내에 부착하는 새로운 핀휜의 다양한 부채꼴 형상에 대해 열전달, 압력강하, 열성능을 평가하였다. 레이놀즈수가 5,000부터 100,000인 경우에 대하여 수치해석을 수행하였으며, 난류모델로는 Low-Re SST 모델을 사용하였다. 수치해석의 정당성을 확보하기 위하여 실험과 동일한 조건에서 면적 평균 누셀트수에 대한 실험값과 계산값을 비교하였다. 앞전 각도와 뒷전 각도를 매개변수로 하여 세 종류의 부채꼴 핀휜의 형상 변화에 따른 열성능을 평가하였다.

Keywords

References

  1. Metzger, D. E., Fan, C. S. and Haley, S. W., 1984, "Effect of Pin Shape and Array Orientation on Heat Transfer, Pressure Loss and Pin Fin Arrays," ASME Journal of Engineering for Gas Turbines and Power, Vol. 106, pp. 252-257. https://doi.org/10.1115/1.3239545
  2. Ames, F. E., Dvorak, L. A. and Morrow, M. J., 2004, "Turbulent Augmentation of Internal Convection Over Pins in Staggered Pin Fin Arrays," Proceedings of ASME Turbo Expo, GT2004-53889.
  3. Chang, S. W., Yang, T. L., Huang, C. C. and Chiang, K. F., 2008, "Endwall Heat Transfer and Pressure Drop in Rectangular Channels with Attached and Detached Circular Pin-Fin Array," International Journal of Heat and Mass Transfer, Vol. 51, pp. 5247-5259. https://doi.org/10.1016/j.ijheatmasstransfer.2008.02.046
  4. Ireland, P. T. and Jones, T. V., 1986, "Detailed Measurement of Heat Transfer on and around a Pedestal in Fully Developed Passage Flow," Proceedings of the 8th International Conference, San Francisco, Vol. 3, pp. 975-980.
  5. Chyu, M. K. and Goldstein, R. J., 1991, "Influence of an Array of Wall-Mounted Cylinders on the Mass Transfer from a Flat Surface," International Journal of Heat and Mass Transfer, Vol. 34, pp. 2175-2186. https://doi.org/10.1016/0017-9310(91)90044-F
  6. Won, S. Y., Mahmood, G. I. and Ligrani, P. M., 2004, "Spatially-Resolved Heat Transfer and Flow Structure in a Rectangular Channel with Pin Fins," International Journal of Heat and Mass Transfer, Vol. 47, pp. 1731-1743. https://doi.org/10.1016/j.ijheatmasstransfer.2003.10.007
  7. Goldstein, R. J. and Chen, S. B., 1998, "Flow and Mass Transfer Performance in Short Pin-Fin Channels with Different Fin Shapes," International Journal of Rotating Machinery, Vol. 4, pp. 113-128. https://doi.org/10.1155/S1023621X98000104
  8. Kim, K. Y. and Moon, M. A., 2009, "Optimization of a Stepped Circular Pin-Fin Array to Enhance Heat Transfer Performance," Heat and Mass Transfer, Vol. 46, pp. 63-74. https://doi.org/10.1007/s00231-009-0544-3
  9. Sahiti, N., Lemouedda, A., Stojkovic, D., Durst, F. and Franz, E., 2006, "Performance Comparison of Pin Fin In-Duct Flow Arrays with Various Pin Cross-Sections," Applied Thermal Engineering, Vol. 26, pp. 1176-1192. https://doi.org/10.1016/j.applthermaleng.2005.10.042
  10. Chyu, M. K., Yen, C. H. and Siw, S., 2007, "Comparison of Heat Transfer from Staggered Pin Fin Arrays with Circular, Cubic and Diamond Shaped Elements," Proceedings of ASME Turbo Expo, GT2007-28306.
  11. Ansys CFX-11.0, 2006, Ansys Inc.
  12. Menter, F. R., 1994, "Two-Equation Eddy- Viscosity Turbulence Models for Engineering Applications," AIAA Journal, Vol. 32, pp. 1598-1605. https://doi.org/10.2514/3.12149
  13. Launder, B. E. and Spalding, D. B., 1974, "The Numerical Computation of Turbulent Flow," Computer Methods in Applied Mechanics and Engineering, Vol. 3, pp. 269-289. https://doi.org/10.1016/0045-7825(74)90029-2
  14. Wilcox, D. C., 1988, "Reassessment of the Scale-Determining Equation for Advanced Turbulence Models," AIAA Journal, Vol. 26, pp. 1299-1310. https://doi.org/10.2514/3.10041
  15. Bardina, J. E., Huang, P. G. and Coakley, T., 1997, "Turbulence Modeling Validation," Fluid Dynamics Conference, 28th AIAA, pp. 1997-2121.
  16. Simoneau, R. J. and VanFossen, G. J., 1984, "Effect of Location in an Array on Heat Transfer to a Short Cylinder in Crossflow," ASME Journal of Heat Transfer, Vol. 106, pp. 42-48. https://doi.org/10.1115/1.3246657
  17. Moon, M. A. and Kim, K. Y., 2013, "Heat Transfer Performance of a New Fan-Shaped Pin-Fin in Internal Cooling Channel," Proceedings of ASME Turbo Expo, GT2013-94193.
  18. Moon, M. A. and Kim K. Y., 2014, "Analysis and Optimization of a Fan-Shaped Pin-Fin in a Rectangular Cooling Channel," International Journal of Heat and Mass Transfer, Vol. 72, pp. 148-162. https://doi.org/10.1016/j.ijheatmasstransfer.2013.12.085
  19. Dittus, F. W. and Boelter, L. M., 1930, "Heat Transfer in Automobile Radiators of the Turbulator Type," University of California, Berkeley Publication, Vol. 2, pp. 443-461.
  20. Petukhov, B. S., 1970, "Advances in Heat Transfer, Academic Press," New York, Vol. 6, pp. 503-504. https://doi.org/10.1016/S0065-2717(08)70153-9
  21. Chang, S. W., Yang, T. L., Huang, C. C. and Ching, K. F., 2008, "Endwall Heat Transfer and Pressure Drop in Rectangular Channels with Attached and Detached Circular Pin-Fin Array," International Journal of Heat and Mass Transfer, Vol. 51, pp. 5247-5259. https://doi.org/10.1016/j.ijheatmasstransfer.2008.02.046