• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.3 no.2
• /
• pp.194-203
• /
• 1993

Quality Control programs for industrial hygiene laboratory have successfully been operated since the 1st round was initiated in April 1992. Three rounds have been completed. Overall analytical performance of participants was improved through a subsquent round. The first round had a large variation among analytical results of all participants, 26.34%~504.22% of coefficient of variation. But the variation of analytical performance in the 2nd and 3rd rounds decreased to 40.42%~52.55% and 10.74%~20.98%, respectively. The difference of analytical performance among participants was decreased by operation of subsquent round. By distribution of Running Performance Index (RPI), over 50% of participants belongs to Category 3 in the first round. The average percentage of participants assigned to Category 3 in the 2nd and 3rd round was decreased to 37.2%. A definite analytical performance improvement of participants seems to be obtained. "A" and "B" group have more participants assigned to Category 3 than those of "C" group through the distribution of RPI by group divided to similar participant. By the distribution of RPI all participants, the percent of participant being over 200 RPI in the 1st round was 43%~52%, but decreased to 9%~29% and 9%~27%, in the 2nd and 3rd round, respectively. These results mentioned above indicate that the analytical performance of all participants have been improved by subsquent Quality Control Program although newcomers joined and a few participants droped out. But, there are some participants with poor analytical performance. Industrial Health Research Institute (IHRI) will offer service such as education, communication and visitation to them, and improve quality of their analytical performance in the future.

• Journal of Broadcast Engineering
• /
• v.13 no.1
• /
• pp.152-161
• /
• 2008

We investigate that when we restrict the encoding modes on the enhancement layer based on that of the base layer exploiting the high correlation between the best modes at base and enhancement layers, we should determine the set of surviving search modes to yield the minimum excessive RD-cost caused by the restriction. Based on these sets, we implement a fast mode decision algorithm for H.264 Scalable Extension (SE). Simulation results show that the proposed algorithm is superior in the sense of the RD-performance to the conventional mode restriction method which is based on the conditional probabilities of the best modes.

• The Korean Journal of Mycology
• /
• v.14 no.3
• /
• pp.195-200
• /
• 1986

The enzyme produced by a strain of Rhizopus japonicus was able to covert selectively ginsenoside $Rb_1$ which was the most abundant ginseng saponin, into ginsenoside Rd which was known to be superior to ginsenoside $Rb_1$ pharmaceutically. This specific conversion of ginsenoside $Rb_1$ without any change of other ginsenoside patterns was confirmed by thin layer chromatography and high performance liquid chromatograpy quantitatively. The amount of ginsenoside Rd was increased to 4.8 and 34.7 folds by enzymatic conversion of ginsenoside $Rb_1$ in total saponin and ginsenoside Rb group saponin, respectively. The increased amount of ginsenoside Rd corresponded to total amount of released glucose and decreased amount of ginsenoside $Rb_1$ accurately.

• Rapid Communication in Photoscience
• /
• v.3 no.1
• /
• pp.16-19
• /
• 2014

Anodic self-organized titania nanotube (TNT) arrays have a great potential as efficient electron-transport materials for dye-sensitized solar cells (DSSC). Herewith we report the photovoltaic and kinetic investigations for a series of heteroleptic ruthenium complexes (RD16-RD18) sensitized on TNT films for DSSC applications. We found that the RD16 device had an enhanced short-circuit current density ($J_{SC}/mAcm^{-2}=15.0$) and an efficiency of power conversion (${\eta}=7.2%$) greater than that of a N719 device (${\eta}=7.1%$) due to the increasing light-harvesting and the broadened spectral features with thiophene-based ligands. However, the device made of RD17 (adding one more hexyl chain) showed smaller $J_{SC}(14.1mAcm^{-2})$ and poorer ${\eta}(6.8%)$ compare to those of RD16 due to smaller amount of dye-loading and less efficient electron injection for the RD17 device than for the RD16 device. For the RD18 dye (adding one more thiophene unit and one more hexyl chain), we found that the device showed even lower $J_{SC}(13.2mAcm^{-2}) $ that led to a poorest device performance (${\eta}=6.2%$) for the RD18 device. These results are against to those obtained from the same dyes sensitized on $TiO_2$ nanoparticle films and they can be rationalized according to the electron transport kinetics measured using the methods of charge extraction and transient photovoltage decays.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.450-457
• /
• 2003

In this paper, we studied the effect of asymmetrical 3rd order IMD of power amplifier due to changes in modulation frequency on IMD cancellation performance. The phase extraction method for determining asymmetric rate for phase distortion of IMD is proposed and the phase difference between lower and upper 3rd order IMD is measured by this method. The phase compensation circuit to decrease the phase difference is also designed and fabricated. From the measurement results using the phase compensation circuit applied to 5 W RF power amplifier fur PCS applications, the 3rd order IMD cancellation performance can be achieved up to 2-tone spacing 1.5 MHz (phase difference within 10$^{\circ}$).

• Journal of the Korean Society of Industry Convergence
• /
• v.15 no.1
• /
• pp.29-36
• /
• 2012

Reinforced concrete shear walls and X-type steel braces were applied in seismic retrofit techniques for seismic performance evaluation of school buildings constructed in accordance with standard design announced by the ordinance of the ministry of construction in 1980s. Seismic performance evaluation was based on FEMA 356 using response spectrum as elastic analysis and conducted to pushover analysis with nonlinear static analysis. The maximum displacement ratio between floors in 4th and 3rd floors of the existing school buildings was less than 1.0%, which was functioning level in FEMA 356. However, because plastic hinge occurs somewhat in structural members according to the results of pushover analysis, partial reinforcement will be required. X-direction of the maximum lateral displacement of reinforced concrete shear walls than X-type steel braces was 45% and 32% in 4th and 3rd floors of school buildings, and Y-direction was 18% and 17%, respectively.

• Atmosphere
• /
• v.21 no.4
• /
• pp.497-506
• /
• 2011

Korean mid- and upper-level aviation turbulence guidance (KTG) system is developed using the unified model (UM)-based regional data assimilation and prediction system (RDAPS) of the Korea Meteorological Administration. The KTG system includes three steps. First, the KTG system calculates a suite of diagnostics in the UM-RDAPS domain. Second, component diagnostics that have different units and numerical magnitudes are normalized into the values between 0 and 1, according to their own thresholds in the KTG system. Finally, normalized diagnostics are combined into one KTG predictor by measuring the weighting scores based on the probability of detection, which is calculated using the observed pilot reports (PIREPs) exclusively of moderate-or-greater (MOG) and null (NIL) intensities. To investigate the optimal performance of the KTG system, two types (RD-KTG and UM-KTG) of the KTG systems are developed and evaluated using the PIREPs over Korea and East Asia. Component diagnostics and their thresholds in the RD-KTG are founded on the 8-yrs (2002.12-2010.11) MM5-based RDAPS (previous version of the RDAPS; ${\Delta}x$ = 30 km) and PIREPs data, while those in the UM-KTG are based on the 6 months (2010.12-2011.5) UM-based RDAPS (${\Delta}x$ = 12 km) and PIREPs data. In comparison between the RD-KTG and UM-KTG, overall performance of the UM-KTG (0.815) is better than that of the RD-KTG (0.79) during the recent 6 months, because forecasting skill for the upper-level wind is higher in the UM-RDAPS than in the MM5-RDAPS. It is also found that the UM-KTG is more efficient than the RD-KTG according to the statistical evaluations and sensitivity tests to the number of component diagnostics.

• Journal of Veterinary Clinics
• /
• v.15 no.2
• /
• pp.427-431
• /
• 1998

This study was undertaken to investigate the effect of exercise induced pulmonary hemorrhage(EIPH) on the finishing position of racehorses, 400 bleeders(305: 1 time, 76: 2 times, 19: 3 times, total: 514 cases) which had bled(EIPH) from their nostrils after their races at the Seoul racecourse during the 5 years period('93-'97) were analyzed for this study. The ratio of bleeders to total racehorses in finishing position 1-3,4-6, 7-9 or above 10 was 0.55, 0.84, 0.90 or 1.13%, respectively. There is tendency to higher incidence of bleeding in the later positioned racehorses group. To analyze the correlation between EIPH and finishing position, finishing potion of each EIPHed horses' was checked at 7 successive races(3 races each before/after EIPH. The average final position at the -3rd race, -2nd racer -lst racer EIPHed race, 1st race,2nd race and 3rd race of each bleeder was 5.85. 5.94, 6.21, 7.32, 7.20, 6.51 and 6.53, respectively. Raring times were adjusted to 1,000 m equivalent. Average racing times of the -3rd race,-2nd racer -lst raced EIPHed race, 1st race, 2nd race and 3rd race of each bleeder was 67.1, 67.1, 67.2, 67.6, 67.5, 67.4 and 67.3 second, respectively. Bleeders which finished the race within 1 second following the winners were 25. 3% of total bleeders. The rest 74.7% reached at the finish line 1 second later than the winners. Particularly 46.3% of bleeders were above 2 second later. Therefore this study suggested that bleeding has effect on performance of the racehorse, consequently it make bleeders be placed later positions.

• Journal of Broadcast Engineering
• /
• v.12 no.6
• /
• pp.585-595
• /
• 2007

Distributed video coding is a new video coding paradigm based on Slepian-Wolf and Wyner-Ziv's information theory Distributed video coding whose decoder exploits side information transfers its computational burden from encoder to decoder, so that encoding with light computational power can be realized. RD performance is superior than that of standard video coding without motion compensation process but still has a gap with that of coding with motion compensation process. This parer introduces basic theory of distributed video coding and its structure and then shows RD performances of DVCs whose coding style is different from each other and of a DVC as a spatial scalable video coder.

• Animal Bioscience
• /
• v.37 no.8
• /
• pp.1333-1344
• /
• 2024

Objective: Litter size and piglet loss at birth significantly impact piglet production and are closely associated with sow parity. Understanding how these traits vary across different parities is crucial for effective herd management. This study investigates the patterns of the number of born alive piglets (NBA), number of piglet losses (NPL), and the proportion of piglet losses (PPL) at birth in Landrace sows under tropical conditions. Additionally, it aims to identify the most suitable model for describing these patterns. Methods: A dataset comprising 2,322 consecutive reproductive records from 258 Landrace sows, spanning parities from 1 to 9, was analyzed. Modeling approaches including 2nd and 3rd degree polynomial models, the Wood gamma function, and a longitudinal model were applied at the individual level to predict NBA, NPL, and PPL. The choice of the best-fitting model was determined based on the lowest mean and standard deviation of the difference between predicted and actual values, Akaike information criterion (AIC), and Bayesian information criterion (BIC). Results: Sow parity significantly influenced NBA, NPL, and PPL (p<0.0001). NBA increased until the 4th parity and then declined. In contrast, NPL and PPL decreased until the 2nd parity and then steadily increased until the 8th parity. The 2nd and 3rd degree polynomials, and longitudinal models showed no significant differences in predicting NBA, NPL, and PPL (p>0.05). The 3rd degree polynomial model had the lowest prediction standard deviation and yielded the smallest AIC and BIC. Conclusion: The 3rd degree polynomial model offers the most suitable description of NBA, NPL, and PPL patterns. It holds promise for applications in genetic evaluations to enhance litter size and reduce piglet loss at birth in sows. These findings highlight the importance of accounting for sow parity effects in swine breeding programs, particularly in tropical conditions, to optimize piglet production and sow performance.