• Journal of electromagnetic engineering and science
• /
• 제4권4호
• /
• pp.183-189
• /
• 2004

In this paper, the Eigen-RAKE receiver in wideband direct sequence code-division multiple access(DS-CDMA) systems with downlink smart antenna is analyzed for different spreading bandwidths(1.25 MHz, 5 MHz, 10 MHz) and different channel environments(macro, micro). The realistic spatio-temporal wideband multipath channel is assumed, one of which is standardized multiple-input single-output(MISO) radio channel model for WCDMA link-level simulations proposed by $3^{rd}$ generation partnership project(3GPP) contributions. We assumed spatial scattering phenomenon in which many unresolvable path signals within a limited range of spatial angle simultaneously contribute to the signals received at the receiver. Several multipaths within one chip are distinguished into each one and the first multipath components are selected as the desired signal and the others are considered self-interference. Downlink DS-CDMA system with eigenbeamformer using wider bandwidth present better performance than that using narrow bandwidth system by employing Eigen-RAKE receiver of many number of branches. It is shown that the downlink eigenbeamformer is more effective in typical urban macro cellular environments when using Eigen-RAKE receiver.

• 한국정보통신학회논문지
• /
• 제8권5호
• /
• pp.970-976
• /
• 2004

본 논문에서는 MRC(Maximal Ratio Combing) 결합 기법을 사용한 RAKE 수신기에서 채널 추정 알고리즘에 따른 성능을 분석한다. 채널 추정 알고리즘에는 WMSA(Weighted Multi-Slot Averaging), 동일 이득 채널 추정 (Equal Cain Estimation ; ECE), 심볼 단위 채널 추정(Symbol-to-Symbol Estimation ; SSE)의 세 가지가 있는데 상업용 시뮬레이션 틀인 HP사의 ADS를 이용하여 비동기 방식 IMT-2000시스템(3GPP)을 대상으로 성능을 분석한다. 성능 분석을 위해서 본 논문은 Jakes 페이딩 채널 모델을 사용한다. 모의실험 결과를 통하여, 저속 도플러(3Km/h)일 때 WMSA 알고리즘이 다른 알고리즘 성능보다 더 좋음을 알 수 있다. 그러나 고속 도플러(120Km/h)일 때, 간단한 구조를 갖는 ECE 알고리즘이 보다 더 유용함을 알 수 있다.

• 한국통신학회논문지
• /
• 제29권5C호
• /
• pp.601-610
• /
• 2004

본 논문에서는 IMT-2000 3GPP 규격의 비동기 역방향 링크 DS-CDMA 시스템에서 신호 구조 기반 Constant Modulus Algorithm (U)을 이용하는 적응 배열 안테나 RAKE 시스템의 성능을 평가한다. 또한, 참조 신호 기반 Least Mean Square (LMS)방식을 이용하는 배열 안테나 시스템과 비교한다. Monte Carlo 실험에서 다중경로, 경로간 감쇄지수, 확산이득 다중사용자 둥과 같은 환경 파라미터가 고려된다. 결과로부터 신호 전력을 분산시키는 다중 경로의 경우 CMA을 이용하는 적응 배열 안테나가 LMS를 이용하는 배열 안테나에 비해 더 큰 수용 용량을 얻을 수 있음을 알 수 있다.

• 한국안전학회지
• /
• 제24권2호
• /
• pp.7-12
• /
• 2009

The machining process of ceramics can be characterized by cracking and brittle fracture. In the machining of ceramics, edge chipping and crack propagation are the principal reasons to cause surface integrity deterioration. Such phenomenon can cause not only poor dimensional and geometric accuracy, but also possible failure of the ceramic parts. Thus, traditional ceramics are very difficult-to-cut materials. Generally, ceramics are machined using conventional method such as grinding and polishing. However these processes are generally costly and have low MRR(material removal rate). To overcome such problems, in this paper, h-BN powder, which gives good cutting property, is added for the fabrication of machinable ceramics by volume of 10 and 15%. The purpose of this study is an analysis of endmill's rake angle for appropriate tools design and manufacturing for the machinable ceramics. In this study, Experimental works are executed to measure cutting force, surface roughness, tool fracture, on different axial rake angle of endmills. Cutting parameters, namely, feed, cutting speed and depth of cut are used to accomplish purpose of this paper. Required experiments are performed, and the results are investigated.

• Journal of Biosystems Engineering
• /
• 제30권3호
• /
• pp.161-165
• /
• 2005

In this study, peeling test of the Altari radish on kimchi pre-processing system for mechanization was performed with the longitudinal plane peeling type with wider cutting blade than that of the peeled chip's. To determine the optimum cutter shape to match this plane peeling type, the peeling tests depending on variable cutting speed, rake angle and blade angle using the blade with thickness as 2 m and width as 50mm were performed, and the patterns of the peeled chips and peeling resistances were investigated. As the result of the tests, the rake angle of the blade with clean peeled surface of the Altari radish was over $45^{\circ}$, and the blade angle and rake angle with the minimum peeling resistance was $20^{\circ}\;and\;60^{\circ}$, respectively. The optimum peeling conditions were; the peeling speed 0.2m/s, blade angle $20^{\circ}$ and the rake angle $60^{\circ}$, and the peeling resistance of each blade was 15 N.

• 한국통신학회논문지
• /
• 제31권5A호
• /
• pp.509-516
• /
• 2006

위성 DMB(Digital Multimedia Broadcasting) 시스템은 중앙의 송신기인 위성과 지상보조 중계기인 Gap-filler로 구성되는 단일 주파수 망이다. NLOS 환경의 음영지역을 커버하기 위해서는 다수의 Gap-filler 설치가 필요한데, 이로 인해 다중경로 성분이 증가하여 Finger의 수가 제한된 현 RAKE 수신기의 성능을 저하시킨다. 이에 본 논문은 RAKE 수신기를 대신하여 주파수 영역 등화기를 사용하되, 현재 시스템의 변경을 최소화하기 위하여 기존 주파수 영역 등화기 기술에서 필요로 한 보호구간을 사용하지 않는 것으로 하고, 시뮬레이션을 통해 그 성능을 분석한다. 시뮬레이션 결과를 통해 주파수 영역 등화기는 현 RAKE 수신기보다 Gap-filer 개수의 증가에 둔감하고, 보다 큰 CDM 채널 용량을 가질 수 있음을 확인할 수 있다. 뿐만 아니라, 다양한 채널 모델에서의 결과는 주파수 영역 등화기가 기존의 시스템에서도 환경에 따라 충분히 사용가능할 수 있음을 말해준다.

• 한국정밀공학회지
• /
• 제4권3호
• /
• pp.44-51
• /
• 1987

In metal cutting various types of chips are produced in consequence of cutting conditions. Flow-type chips have been studied in most cases because they are easier to be analyzed, but the actual surfaces of chips are not smooth, but crushed. This paper deals with saw-toothed chips, special types of flow-type chips, which have deep concaves and high convexes and sharp angles on the free surface. I tried to establish the theory of saw-toothed chip mechanism through experimental observation, that is, the mathmatical model of the cutting energy and cutting mechanism through the geometrical observation of the chips by using a microscope. The results obtained are as follows: 1. The mechanism of saw-toothed chips is diffenent from that of general flow-chips. 2. In the case of saw-toothed chips, the shear angle must be measured by the hypotenuse angle and the rake angle, and the shear angle is more affected by the rake angle than by the hypotenbuse angle. 3. The friction angle is represented by .beta. = . pi. /4+ .alpha./ sub n/- .phi. which is different from Merchant's equation. 4. The pitch and the slip are greatly influenced by depth of cut, but the influence of the rake angle on it is small. 5. The normal stress and the shear stress on the shear plane decrease with the increase of the cutting depth, and they are almost independent on the variation of a rake angle. 6. The unit friction energy on the tool face, the unit shear energy on the shear plane, and the total cutting energy per unit volume decrease with the increase of rake angle and cutting depth.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.153-156
• /
• 2000

In this paper, the performance of the parallel interference cancellation(PIC) with RAKE receiver is more precisely analyzed in the uplink multipath fading channel. There is some difference between the proposed analysis method and the previous ones. Namely, it can be confirmed that the proposed analysis method by using stochastical characteristics is more accurate than the previous ones. It is also verified that the analysis result is similar to simulation as the number of user is increased. It is assumed that the channel estimation is perfect and the delay of multipath is Tc in the simulation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 제14회 신호처리 합동 학술대회 논문집
• /
• pp.591-594
• /
• 2001

In the W-CDMA system, cell search is one of the imporant functions of the mobile station searching for a cell and achieving spreading code and time synchronization to its downlink scrembling code. For the methods of cell search to optimize codes, three stages are considered: 1) slot synchronization, 2) frame synchronization, and 3) scrambling code identification. Channels for cell search are Primary Synchronization Channel (P-SCH), Secondary Synchronization Channel(S-SCH), and Common Pilot Channel (CPICH). In this paper, cell search is analyzed based on simulation. Rake receiver provides improvement of Performance as an increase of bandwidth because there are more available multipaths. In this paper, the performance of W-CDMA system employing RAKE receiver is evaluated by computer simulation over the types of ITU_R wideband channel model and spreading rate. The result shows that the performance of CDMA adapting RAKE receiver is improved by the increase of multipath components in equal level of the received power.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.32-37
• /
• 2001

In the present industry, there are necessary to cut not only iron metals but also non-ferrous metals such as aluminum, brass, plastic and wood(Paulownia). therefore it had been made the studies of non-ferrous metals by many scientists. we hope this kind of study will continue. The purpose of this study is to conduct the basic experiment about influencing of change the side rake angle at turning of non-ferrous metals. As the results, the surface roughnesses were on the increase with a increase of side-rake angle at the case of the plastic, brass, aluminum, and paulownia.