• Journal of the Optical Society of Korea
• /
• v.10 no.1
• /
• pp.48-54
• /
• 2006

White-light scanning interferometry (WLI) and phase shifting interferometry (PSI) are increasingly used for surface topography measurements, particularly for areal measurements. In this paper, we compare surface profiling results obtained from above two optical methods with those obtained from stylus instruments. For moderately rough surfaces ($Ra{\approx}500\;nm$), roughness measurements obtained with WLI and the stylus method seem to provide close agreement on the same roughness samples. For surface roughness measurements in the 50 nm to 300 nm range of Ra, discrepancies between WLI and the stylus method are observed. In some cases the discrepancy is as large as 109% of the value obtained with the stylus method. By contrast, the PSI results are in good agreement with those of the stylus technique.

• Journal of Veterinary Clinics
• /
• v.18 no.3
• /
• pp.304-310
• /
• 2001

The joint disease including osteoarthris (OA) and rheumatoid arthritis (RA) are common in the horse. Many studies have been performed to develop biochemical markers reflecting the abnormalities of cartilage and synovial membrane. However, no specific, sensitive and clinically well established assay systems have been yet available to characterize the severity of joint diseases. Indeed, radiography is still doctor's best choice of assessing joint damage in OA/RA. This review focuses on biochemical molecules such as proteoglycan, collagen, matrix metalloproteinases (MMPs), lectin and cytokine to assess their potential value for not only predicting stage of joint disease but also monitoring treatment efficacy.

• Quality Improvement in Health Care
• /
• v.19 no.2
• /
• pp.68-80
• /
• 2013

Background: This study investigates improvements in non-value-added nursing activities in clinical work, in order to improve the efficiency and quality of nursing activities. Methods: The study was performed as a quality improvement project at a tertiary general hospital. The nursing activities that needed improvements were categories into admission care, discharge care, supply management, diagnostic work-up related activities, and others. The nursing time and frequency of non-value-added activities were compared across nine nursing units before and after implementation of the quality improvement program. Post-implementation patient and nurse satisfaction were subsequently analyzed. Result: Post-implementation, the time spent on non-value-added nursing activities was reduced and patients and nurses were satisfied with the improvements. Discussion: Reducing non-value-added activities in nursing can increase the work efficiency and ensure time for patient care, thus improving the quality of nursing care. For further study, accurate surveys on nursing activities based on nursing time are required.

• Journal of Distribution Science
• /
• v.21 no.1
• /
• pp.119-128
• /
• 2023

Purpose: Due to COVID-19, the rapidly changing untact culture from offline to online has spread rapidly, increasing the utilization of omni-channel. However, among the studies on consumers in the online market, there are not many studies that analyze Shopping Values and attitudes toward omnichannel Acceptance. Research design, data, and methodology: This study investigated through empirical analysis how Shopping Values and innovation propensity of consumers using omni channels affect omni channel Acceptance attitudes. The analysis results based on a total of 268 questionnaires using SPSS v.23 and AMOS v.23 statistical programs are as follows. Results: First, it was found that the perceived Value of omnichannel use had a positive effect on the innovation tendency, and the pleasure Value had a greater effect than the actual Value. Second, it was found that the practical and hedonic Value of the omnichannel had a positive effect on the attitude of service Acceptance. Third, it was found that Omni Channel's consumer innovation tendency had a positive effect on service Acceptance attitude. Conclusion: This study proved that Shopping Value perception and individual innovation propensity for omnichannel services have a positive effect on Acceptance attitude, and it is of academic significance in that it expanded understanding of what factors are needed to increase Acceptance attitude of Omni Channel services.

• Restorative Dentistry and Endodontics
• /
• v.44 no.4
• /
• pp.44.1-44.11
• /
• 2019

Objectives: To compare the flexural cyclic fatigue resistance and the length of the fractured segments (FLs) of recently introduced M-Pro rotary files with that of RaCe rotary files in curved canals and to evaluate the fracture surface by scanning electron microscopy (SEM). Materials and Methods: Thirty-six endodontic files with the same tip size and taper (size 25, 0.06 taper) were used. The samples were classified into 2 groups (n = 18): the M-Pro group (M-Pro IMD) and the RaCe group (FKG). A custom-made simulated canal model was fabricated to evaluate the total number of cycles to failure and the FL. SEM was used to examine the fracture surfaces of the fragmented segments. The data were statistically analyzed and comparisons between the 2 groups for normally distributed numerical variables were carried out using the independent Student's t-test. A p value less than 0.05 was considered to indicate statistical significance. Results: The M-Pro group showed significantly higher resistance to flexural cyclic fatigue than the RaCe group (p < 0.05), but there was no significant difference in the FLs between the 2 groups (p ≥ 0.05). Conclusions: Thermal treatment of nickel-titanium instruments can improve the flexural cyclic fatigue resistance of rotary endodontic files, and the M-Pro rotary system seems to be a promising rotary endodontic file.

• The Journal of Information Systems
• /
• v.29 no.2
• /
• pp.131-147
• /
• 2020

Purpose The purpose of this study is to develop intelligent vehicle parking distribution system based on LoRa network at the circumstance of traffic congestion during cultural festival in a local city. This paper proposes a parking dispatch and distribution system using a Q-learning algorithm to rapidly disperse traffics that increases suddenly because of in-bound traffics from the outside of a city in the real-time base as well as to increase parking probability in a parking lot which is widely located in a city. Design/methodology/approach The system get information on realtime-base from the sensor network of IoT (LoRa network). It will contribute to solve the sudden increase in traffic and parking bottlenecks during local cultural festival. We applied the simulation system with Queuing model to the Yudeung Festival in Jinju, Korea. We proposed a Q-learning algorithm that could change the learning policy by setting the acceptability value of each parking lot as a threshold from the Jinju highway IC (Interchange) to the 7 parking lots. LoRa Network platform supports to browse parking resource information to each vehicle in realtime. The system updates Q-table periodically using Q-learning algorithm as soon as get information from parking lots. The Queuing Theory with Poisson arrival distribution is used to get probability distribution function. The Dijkstra algorithm is used to find the shortest distance. Findings This paper suggest a simulation test to verify the efficiency of Q-learning algorithm at the circumstance of high traffic jam in a city during local festival. As a result of the simulation, the proposed algorithm performed well even when each parking lot was somewhat saturated. When an intelligent learning system such as an O-learning algorithm is applied, it is possible to more effectively distribute the vehicle to a lot with a high parking probability when the vehicle inflow from the outside rapidly increases at a specific time, such as a local city cultural festival.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.5
• /
• pp.743-754
• /
• 2022

This paper contains the results of the development and performance evaluation of the environmental data monitoring system for the fish farm. For the hardware development, the analogue sensor is used to collect dissolved oxygen, pH, salinity, and temperature of the fish farm water, and the digital sensor is used for collecting ambient temperature, humidity, and location information via a GPS module to be sent to cloud-based Firebase DB. A set of LoRa transmitters and receivers is used as a communication module to upload the collected data. The data stored in Firebase is retrieved as a graph on a web and mobile application to monitor the environmental data changes in real-time. A notification will be delivered if the collected data is outside the determined optimal value. To evaluate the performance of the developed system, a response time from hardware modules to web and mobile applications is ranging from 6.2 to 6.85 seconds, which indicates satisfactory results.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.4
• /
• pp.336-350
• /
• 2001

The purpose of this study was to investigate corrosion tendency and to compare corrosion resistance of three dental magnetic attachments and its keeper alloy by coercive, electrochemical method. By using petentiodynamic polarization technique, magnetic elements and its keeper alloy of Magfit EX600 system(MF, MFK), Dyna ES regular system(DN, DNK) and Shiner SR magnet system(SR, SRK) were corroded electrochemically in 0.9% NaCl electrolytic solution. Open-circuit potential and anodic polarization curve was measured with Potentiostat(model 273 EG&E) and polarization curve was created by current density per square area following scanning of increased series of voltage in the rate of 1.0mV per second. Before and after electrochemical corrosion, the surface roughness test was done. Thereafter the change of mean surface roughness value(Ra) and mean peak value(Rt) of surface roughness was compared one another. In order to observe the corroded surface of each specimen, metallurgical light microscopic(${\times}37.5$) and scanning electron microscopic view(SEM ${\times}100$) was taken and compared one another. Conclusion is followings. 1. All of six covering metal of dental magnetic attachments and its keeper alloy were corroded in various degree after electrochemical corrosion. 2. The corrosion resistance of which used in this experiment is the following in high order; DNK, MFK, DN, MF, SRK and SR. 3. Especially Shiner magnet system and its keeper alloy were more severely corroded after electrochemical corrosion and the change of Ra Rt value were more increased than others. 4 Metallurgical and scanning electron microscopic view showed the pitting corrosion tendency of all experimental alloy but DNK and SR. 5. Covering metal of magnet was more corroded than its keeper alloy.

• Journal of Digital Convergence
• /
• v.5 no.1
• /
• pp.9-15
• /
• 2007

In today's dynamic and turbulent business environment, in order to become globally competitive, many companies are trying to get closer to the customer and deliver value added product and services in the shortest possible time which demands integration of business processes of an enterprise, Enterprise Resource Planning (ERP) is such a strategic tool, which helps the company to gain competitive edge by integrating all business processes and optimizing the resources available. This paper throws light on how ERP evolved, what makes up an ERP system and what it has to offer to the industries. The paper includes the role of ERP, perception of ERP value, ERP plan and direction. The author also argues checkpoints as a preview to ERP introduction.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.312-322
• /
• 2006

The objectives of this study were to evaluate the effect of surface roughness on the surface color and translucency of the composite resins. Two composite resins (Esthet-X, Dentsply, Milford, USA and Charisma, Kulzer, Domagen, Germany) were used to investigate the surface color. Charisma was used to investigate the translucency. 40 disc samples (diameter: 8 mm, thickness: 5 mm) were made by each product to measure the surface color. Polymerized each sample's one side was treated by Sof-Lex finishing and polishing system (Group C, M, F, SF). 40 disc samples (diameter: 6 mm, thickness: 1 mm) were prepared to measure the opacity. 1 mm samples were ground one side with #600, #1000, #1500 and #2000 sandpapers. CIE $L^{*}a^{*}b^{*}$ values of each 5 mm thickness samples, and XYZ values of 1 mm thickness samples on the white and black background were measured with spectrophotometer (Spectrolino, GretagMacbeth, Regensdorf, Switzerland). Mean surface roughness (Ra) of all samples before and after surface treatment was measured using the Surface Roughness Tester SJ-301 (Mytutoyo, Tokyo, Japan). Regardless of type and shade of the composite resin, $L^{*}$ values measured in group C were higher than others (p < 0.05), and $L^{*}$ value decreased as the Ra value decreased except B3 shade of Esthet-X. But there were no significant difference in $a^{*}$ values among groups. In control group and SF, highest $b^{*}$ values were measured (p < 0.05), except B1 shade of Esthet-X. Contrast ratio decreased as the Ra value decreased (p < 0.05). With the above results, difference of surface roughness has influence on surface color and translucency of dental composite resins.