• Journal of the Korea Concrete Institute
• /
• v.16 no.6 s.84
• /
• pp.813-822
• /
• 2004

For the prediction of the shear strength of reinforced concrete members subjected to axial force, this paper presents a truss model, Transformation Angle Truss Model (TATM), that can predict the shear behavior of reinforced concrete members subjected to combined actions of shear, axial force, and bending moment. In TATM, as axial compressive stress increases, crack angle decreases and concrete contribution due to the shear resistance of concrete along the crack direction increases in order to consider the effect of the axial force. To verify if the prediction results of TATM have an accuracy and reliability for the shear strength of reinforced concrete members subjected to axial forces, the shear test results of a total of 67 RC members subjected to axial force reported in the technical literatures were collected and compared with TATM and existing analytical models(MCFT RA-STM and FA-STM). As a result of comparing with experimental and theoretical results, the test results was better predicted by TATM with 0.94 in average value of $\tau_{test}/\tau_{ana}$. and $11.2\%$ in coefficient of variation than other truss models. And theoretical results obtained from TATM were not effect by steel capacity ratio, axial force, shear span-to-depth ratio, and compressive steel ratio.

• Fashion & Textile Research Journal
• /
• v.19 no.5
• /
• pp.653-660
• /
• 2017

Recently, consumers' evaluation and purchase of online design has been increasing due to the popularization of designing through personal computers, but there has not been enough studies on consumers' brain wave responses depending on the change of PC monitor's color. Therefore, this study investigated how brain waves changed when different background colors with gray patterns were presented through PC monitors. Six background colors with same tone of slightly low saturation were selected, including ivory, yellow, pink, green, blue and pure white as a base color. The brightness and characteristics of color used were analyzed using the luminance meter and color scales. Brain wave was measured by EEG measurement equipment. Brain wave measurement was carried out with 9 subjects at 6 points: F3, F4, T3, T4, O1, and O2. Stimuli were shown for 15 seconds each and black screens were displayed for 15 seconds between each stimulus. As results, the brain waves at O1 responded sensitively by different background colors, followed by F4 and T4. Brain index such as 'RT', 'RA', 'RG', 'RSA', and 'RAHB' showed significant differences depending on the background color at O1, whereas 'RST' differed at F4. Yellow and blue backgrounds pair was the only stimuli that showed significant differences in six brain indices mentioned. Yellow background had higher value of 'RG' at O1 and higher 'RST' at F4, indicating yellow background enhanced concentration. Blue background activated 'RT', 'RA', 'RSA', 'RAHB' at O1, meaning blue background induced calm and stable state.

• Journal of the Korea Concrete Institute
• /
• v.17 no.3 s.87
• /
• pp.435-444
• /
• 2005

This paper predicted the shear behavior of reinforced concrete columns using Transformation Angle Truss Model (TATM) considered the effects of bending moment and axial force. Nine columns with various shear span- to-depth ratios and axial force ratios were tested to verify the theoretical results obtained from TATM. Fine linear displacement transducers (LVDT) were attached to a side of the column near the shear critical region to measure the curvature, the longitudinal and transverse axial deformations, and the shear deformation of the column. The test was terminated when the value of the applied load dropped to about $85\%$ of the maximum-recorded load in the post-peak descending branch. All the columns were failed in shear before yielding of the flexural steel. The shear strength and the stiffness of the columns increased, as the axial force increased and the shear span-to-depth ratio decreased. Shear stress-shear strain and shear stress-strain of shear reinforcement curves obtained from TATM were agreed well with the test results in comparison to other truss models (MCFT, RA-STM, and FA-STM).

• Journal of Animal Science and Technology
• /
• v.47 no.2
• /
• pp.261-270
• /
• 2005

Total number of 237 Hanwoos were purchased from the nationwide fanns based on the different market weights and sex. After slaughtering, they were evaluated to estimate the productivity of carcass components by the sex and market weight, and to predict the beef carcass yield grade equation. The main results in this study were summarized as follows; With respect to carcass characteristics, the yield percentages were different(P < 0.01) among sex groups, but were not different among market weight groups. Sex or market weights showed significant effects on the carcass yield grade(YG) factors(BFT, RA, carcass weight(CW). The YG equation from this study could be expressed as a multiple regression y = 64.74 - 0.0198 ${\times}$ CW(kg) - 5.226 $\time$ BFT(cm)+0.1339 $\time$ RA($cm^2$ $R^2$ = 0.52 Among the YG factors, the BFT was the highest contributor to the YG equation. Compared the previous equation reported in 1992 with the equation from this study, the bias values between predicted value and the actual cutability were 9.17 and 2.39, respectively. In conclusion, the equation estimated from this study was more accurate in predicting the cutability than that from the previous equation reported in 1992.

• The Journal of Advanced Prosthodontics
• /
• v.11 no.6
• /
• pp.341-349
• /
• 2019

PURPOSE. A novel retentive type of implant prosthesis that does not require the use of cement or screw holes has been introduced; however, there are few reports examining the biomechanical aspects of this novel implant. This study aimed to evaluate the biomechanical features of cementless fixation (CLF) implant prostheses. MATERIALS AND METHODS. The test groups of three variations of CLF implant prostheses and a control group of conventional cement-retained (CR) prosthesis were designed three-dimensionally for finite element analysis. The test groups were divided according to the abutment shape and the relining strategy on the inner surface of the implant crown as follows; resin-air hole-full (RAF), resin-air hole (RA), and resin-no air hole (RNA). The von Mises stress and principal stress were used to evaluate the stress values and distributions of the implant components. Contact open values were calculated to analyze the gap formation of the contact surfaces at the abutment-resin and abutment-implant interfaces. The micro-strain values were evaluated for the surrounding bone. RESULTS. Values reflecting the maximum stress on the abutment were as follows (in MPa): RAF, 25.6; RA, 23.4; RNA, 20.0; and CR, 15.8. The value of gap formation was measured from 0.88 to 1.19 ㎛ at the abutment-resin interface and 24.4 to 24.7 ㎛ at the abutment-implant interface. The strain distribution was similar in all cases. CONCLUSION. CLF had no disadvantages in terms of the biomechanical features compared with conventional CR implant prosthesis and could be successfully applied for implant prosthesis.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.12
• /
• pp.57-68
• /
• 2018

A system to prevent disasters by collecting and analyzing environmental information such as road surface sedimentation, sinkholes, collapse risk of bridges, temperature and humidity around tram station is continuously monitored by monitoring the condition of road surface when constructing tram which is one of the urban railways. In this paper, we propose a wireless network security management system for tram roads based on LPWA that can recognize risk factors of road surface, bridge and tram station of tram in advance and prevent risk. The proposed system consists of a sensor node that detects the state of the tram road surface, a gateway that collects sensor information, and a safety management system that monitors the safety and environmental conditions of the tram road surface, and applies the low power long distance communication technology. As a result of comparing the proposed system with the LTE system in the field test, it was confirmed that there is no significant difference between the sensor information value and the critical alarm level in the monitoring system.

• The Journal of Advanced Prosthodontics
• /
• v.13 no.3
• /
• pp.144-151
• /
• 2021

PURPOSE. The purpose of this in vitro study was to investigate the wear resistance and surface roughness of three interim resin materials, which were subjected to chewing simulation. MATERIALS AND METHODS. Three interim resin materials were evaluated: (1) three-dimensional (3D) printed (digital light processing type), (2) computer-aided design and computer-aided manufacturing (CAD/CAM) milled, and (3) conventional polymethyl methacrylate interim resin materials. A total of 48 substrate specimens were prepared. The specimens were divided into two subgroups and subjected to 30,000 or 60,000 cycles of chewing simulation (n = 8). The wear volume loss and surface roughness of the materials were compared. Statistical analysis was performed using one-way analysis of variance and Tukey's post-hoc test (α=.05). RESULTS. The mean ± standard deviation values of wear volume loss (in mm³) against the metal abrader after 60,000 cycles were 0.10 ± 0.01 for the 3D printed resin, 0.21 ± 0.02 for the milled resin, and 0.44 ± 0.01 for the conventional resin. Statistically significant differences among volume losses were found in the order of 3D printed, milled, and conventional interim materials (P<.001). After 60,000 cycles of simulated chewing, the mean surface roughness (Ra; ㎛) values for 3D printed, milled, and conventional materials were 0.59 ± 0.06, 1.27 ± 0.49, and 1.64 ± 0.44, respectively. A significant difference was found in the Ra value between 3D printed and conventional materials (P=.01). CONCLUSION. The interim restorative materials for additive and subtractive manufacturing digital technologies exhibited less wear volume loss than the conventional interim resin. The 3D printed interim restorative material showed a smoother surface than the conventional interim material after simulated chewing.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.2230-2243
• /
• 2022

The tin tailing processing industry in Malaysia has operated with minimal regard and awareness for material management and working environment safety, impacting the environment and workers in aspects of radiation and heavy metal exposure. RIA was conducted where environmental samples were analyzed, revealing concentrations of ²²⁶Ra, ²³²Th and ⁴⁰K between the range of 0.1-10.0, 0.0-25.7, and 0.1-5.8 Bq/g respectively, resulting in the AED exceeding UNCEAR recommended value and regulation limit enforced by AELB (1 mSv/y). Ra_eq calculated indicates that samples collected pose a significant threat to human health from gamma-ray exposure. Assessment of heavy metal content via pollution indices of soil and sediment showed significant contamination and enrichment from processing activities conducted. As and Fe were two of the highest metals exposed both via soil ingestion with an average of 4.6 × 10^-3 mg/kg-day and 1.4 × 10^-4 mg/kg-day, and dermal contact with an average of 5.6 × 10^-4 mg/kg-day and 6.0 × 10^-4. mg/kg-day respectively. Exposure via accidental ingestion of soil and sediment could potentially cause adverse non-carcinogenic and carcinogenic health effect towards workers in the industry. Correlation analysis indicates the presence of a relationship between the concentration of NORM and trace elements.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.2
• /
• pp.542-558
• /
• 2023

A digital focus index (DFI) is a value used to determine image focus in scientific apparatus and smart devices. Automatic focus (AF) is an iterative and time-consuming procedure; however, its processing time can be reduced using a general processing unit (GPU) and a multi-core processor (MCP). In this study, parallel architectures of a minimax search algorithm (MSA) are applied to two DFIs: range algorithm (RA) and image contrast (CT). The DFIs are based on a histogram; however, the parallel computation of the histogram is conventionally inefficient because of the bank conflict in shared memory. The parallel architectures of RA and CT are constructed using parallel reduction for MSA, which is performed through parallel relative rating of the image pixel pairs and halved the rating in every step. The array size is then decreased to one, and the minimax is determined at the final reduction. Kernels for the architectures are constructed using open source software to make it relatively platform independent. The kernels are tested in a hexa-core PC and an embedded device using Lenna images of various sizes based on the resolutions of industrial cameras. The performance of the kernels for the DFIs was investigated in terms of processing speed and computational acceleration; the maximum acceleration was 32.6× in the best case and the MCP exhibited a higher performance.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.1
• /
• pp.31-46
• /
• 2002

The purpose of this research is to provide scientific training guides and the basis for preventing injuries in performing tango backward walk by comparing the effects the height and shape of a heel will have on leg muscles and determining the difference between skilled and unskilled dancers through EMG analysis according to different types of shoes Total eight female athletes were selected for this research. Four with six years of professional dancing experience and another four with one year of dance sports experience. Utilizing the EMG system, rectus femoris, biceps femoris, anterior tibialis, gastrocnemius were measured under different heights (0cm, 5cm, 7cm, 9cm) and shapes (flat, fine, wide) of a heel. Experiments were conducted calculating EMG peak value and muscle load ration under different types of shoes in order to analyze the EMG of leg muscles and Erector Spinae when performing tango backward walk. The result was as follows: 1. The EMG peak value of leg muscles showed significant difference under different heights of a heel in anterior tibialis(p<.001) and gastrocnemius(p.<01) in case of skilled dancers, and in biceps femoris(p.<01) in case of unskilled dancers. 2. The EMG peak value of leg muscles showed significant difference under different shapes of a heel in anterior tibialis(p<.001) and gastrocnemius(p<.001) in case of skilled dancers, and showed no significant difference in case of unskilled dancers. 3. The muscle load ration of leg muscles showed different degrees of muscle contribution between skilled and unskilled dancers. The muscle load ration was in the order of anterior tibialis, rectus femoris, biceps femoris, and gastrocnemius in case of skilled dancers and anterior tibialis, gastrocnemius, biceps femoris, and rectus femoris in case of unskilled dancers.