• Structural Engineering and Mechanics
• /
• v.53 no.3
• /
• pp.575-587
• /
• 2015

This paper focuses on vibration analysis of functionally graded cylindrical shell submerged in an incompressible fluid. The equation is established considering axial and lateral hydrostatic pressure based on first order shear deformation theory of shell motion using the wave propagation approach and classic Fl$\ddot{u}$gge shell equations. To study accuracy of the present analysis, a comparison carried out with a known data and the finite element package ABAQUS. With this method the effects of shell parameters, m, n, h/R, L/R, different boundary conditions and different power-law exponent of material of functionally graded cylindrical shells, on the frequencies are investigated. The results obtained from the present approach show good agreement with published results.

• Journal of Magnetics
• /
• v.20 no.4
• /
• pp.360-365
• /
• 2015

Spatial distributions of magnetic flux density in a newly designed magnetized inductively coupled plasma (M-ICP) etcher were investigated. Radial and axial magnetic flux densities as well as the magnetic flux density on the center of the substrate holder were controllable by placing multiple circular coils around the etcher properly. The plasma density non-uniformity in M-ICP (25 Gauss) can be reduced (1.4%) compared to that in ICP (16.7%) when the neutral gas pressure was 0.67 Pa and a right-hand circularly polarized wave (R-wave) can be propagated in to the etcher by making magnetic flux density increases both radially and axially from the center of the substrate holder.

• Journal of Veterinary Clinics
• /
• v.15 no.2
• /
• pp.432-441
• /
• 1998

The electrocardiogram (ECG) and electrolytes were measured to obtain diagnostic data after experimental obstruction of duodenum in 8 dogs. Clinical signs of these appeared lower heart rate, temperatures respiration and blood pressure than signs of preoperation. In changes of electrolytes and acid-base balances, all dogs appeared hyponatremiai hypochloremia, metabolic alkalosis, and increased pHi HCO3, scot in blood, but potassium values appeared to increase in 3 cases fl-inc.) and to decrease in 5 cases (K- dec.) Two of three in K-inc. and three of five in K-dec. died at 60 hrs and 72 hrs after obstruction respectly. In changes of ECGI amplitudes of the K-inc cases appeared high in T wave and low in R wave, but amplitudes of the K-dec cases appeared low T waver 57 segment and high in R wave. Conduction times of the K-inc appeared the shorted PR intervals but the K-dec appeared the prolonged PR interval. The changes of these appeared apparently in lead II.

• Geophysics and Geophysical Exploration
• /
• v.17 no.1
• /
• pp.11-20
• /
• 2014

To reveal shear-wave velocities ($v_s$) and site characterization of Wonju, Korea, Rayleigh waves were recorded at 78 sites of lower altitude using 12 to 24 4.5-Hz vertical geophones for 20 days during the period of February to September 2013. Dispersion curves of the Rayleigh waves obtained by the extended spatial autocorrelation method were inverted using the damped least-squares method to derive $v_s$ models. From these 1-D models, the average $v_s$ to a depth of 30 m ($v_s30$), $v_s$ of weathered rocks, depths to these basement rocks, and average $v_s$ of the overburden layer were derived to be $16.3{\pm}0.7m$, $576{\pm}8m/s$, $290{\pm}7m/s$, and $418{\pm}13m/s$, respectively, in the 95% confidence range. To determine adequate proxies for $v_s30$, we computed correlation coefficients of $v_s30$ with topographic slope (r = 0.46) and elevation (r = 0.43). An empirical linear relationship is presented as a combination of individually estimated $v_s30$ with weighting factors of 0.45, 0.45, and 0.1 for topographic slope, elevation, and mapped lithology, respectively. Due to a weak correlation between $v_s30$ obtained from inversion of dispersion curves and the proxy-based estimation (r = 0.50), however, the relatively large error range should be considered for applications of this relationship.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.4
• /
• pp.331-337
• /
• 2014

We analyzed the 3-D characteristics of the dynamic response of seabed around a submerged breakwater due to wave loading using a 3-D numerical scheme (LES-WASS-3D). Using our model, which considers the wave-structure-sandy seabed interactions in a 3-D wave field, we were able to investigate the 3-D characteristics of the pore-water pressure in the seabed around the submerged breakwater under various incident wave conditions. To verify the 3-D numerical analysis method suggested in this study, we compared the numerical results with the existing experimental results and found good agreement between them. The numerical analysis reveals that high pore-water pressure in the seabed is generated below a large wave height at the front slope of the submerged breakwater. It was also shown that the non-dimensional pore-water pressure in the seabed increases as the wave period increases because the wave energy dissipation decreases on the submerged breakwater and seabed as the wave period increases.

• Smart Structures and Systems
• /
• v.11 no.2
• /
• pp.185-197
• /
• 2013

We developed a simultaneous strain measurement and damage detection technique using a pair of surface-mounted piezoelectric transducers and a fiber connecting them. This is a novel sensor configuration of the fiber acoustic wave (FAW) piezoelectric transducer. In this study, lead-zirconate-titanate (PZT) transducers are installed conventionally on a plate's surface, which is a technique used in many structural health monitoring studies. However, our PZTs are also connected with an optical fiber. A FAW and Lamb wave are simultaneously guided in the optical fiber and the structure, respectively. The dependency of the time-of-flight of the FAW on the applied strain is quantified for strain sensing. In our experimental results, the FAW exhibited excellent linear behavior and no hysteresis with respect to the change in strain. On the other hand, the well-known damage detection function of the surface-mounted PZT transducers was still available by monitoring the waveform change in the conventional Lamb wave ultrasonic path.

• Journal of the Korean Society for Railway
• /
• v.8 no.2
• /
• pp.111-115
• /
• 2005

The Study provides the technical background and calculation method f3r the long wave track defect. On high speed railway, It is necessary to manage the long wave band up to 80m track defect fur improving a riding quality. For this reason, Track recording methods for highspeed railway are used 10m and 30m recording bases, these are covered middle wave band and long wave band successfully. Extended base recording data is calculated by geometrical model and this data provides a good result for KTX riding index.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.9
• /
• pp.1660-1668
• /
• 2008

The WiBro was adopted to the 3G international standard. By the change of specification from Wave 1 to Wave 2, MIMO technology is applied in order to increase the speed of downlink. By MIMO the RF part of WiBro base station is increased to 2 Tx paths. Therefore, the size of RF part is bigger and material cost is increased. For reducing these demerits, the RF part which is consisted of PA, LNA, and TDD switch is designed to one complex RF unit. Also, the experimental results of the RF unit have been discussed. Since the complex RF unit is more compact than the RF part of Wave 1 base station, it can be used as the RF part of Wave 2 base station with 2T/2R MIMO.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.4
• /
• pp.371-382
• /
• 2001

The recognition of such natural wave guides as plates, rods, hollow cylinders, multi-layer structures or simply an interface between two materials combined with an increased understanding of the physics and wave mechanics of guided wave propagation has led to a significant increase in the number of guided wave inspection applications being developed each year. Of primary attention Is the ability to inspect partially hidden structures, hard to access areas, and teated or insulated structures. An introduction to some physical consideration of guided waves followed by some sample problem descriptions in pipe, ice detection, fouling detection in the foods industry, aircraft, tar coated structures and acoustic microscopy is presented in this paper. A sample problem in Boundary Element Modeling is also presented to illustrate the move in guided wave analysis beyond detection and location analysis to quantification.

• The Journal of Asian Finance, Economics and Business
• /
• v.2 no.4
• /
• pp.13-20
• /
• 2015

The purpose of this research is to identify the relation between the Korean wave and Korean cosmetics export. Instead of using UN COMTRADE data as with other researches on the similar studies, this paper adopts Google Trends query index with keyword 'Korean drama'as a proxy variable for cultural trade. With controlling export determining factors such as GDPs of import and export countries, distance, R&D, and FTA, this paper examines whether the Korean wave represented by Google Trends contributes to the explosive increase of Korean cosmetics export in the recent years. Moreover, this study also investigates the possible effects of the Korean wave on export that could vary according to the different trade groups by classifying import countries into two groups: 74 countries worldwide and 9 ASEAN member countries. The results reveal that the Korean wave indeed leads to cosmetics export to ASEAN countries but show weak relation with cosmetics export to worldwide.