• 마이크로전자및패키징학회지
• /
• 제18권2호
• /
• pp.35-41
• /
• 2011

Recently, board level solder joint reliability performance of IC packages during drop impact becomes a great concern to semiconductor and electronic product manufacturers. The handheld electronic products are prone to being dropped during their useful service life because of their size and weight. The IC packages are susceptible to solder joint failures, induced by a combination of printed circuit board (PCB) bending and mechanical shock during impact. The board level drop testing is an effective method to characterize the solder joint reliability performance of miniature handheld products. In this paper, applying the JEDEC (JESD22-B111) standard present a finite element modeling of the FBGA. The simulation results revealed that maximum stress was located at the outermost solder ball in the PCB or IC package side, which consisted well with the location of crack initiation observed in the failure analysis after drop reliability tests.

• Bulletin of the Korean Chemical Society
• /
• 제32권7호
• /
• pp.2397-2404
• /
• 2011

Variable selection k nearest neighbor QSAR modeling approach was applied to a data set of 80 3-arylisoquinolines exhibiting cytotoxicity against human lung tumor cell line (A-549). All compounds were characterized with molecular topology descriptors calculated with the MolconnZ program. Seven compounds were randomly selected from the original dataset and used as an external validation set. The remaining subset of 73 compounds was divided into multiple training (56 to 61 compounds) and test (17 to 12 compounds) sets using a chemical diversity sampling method developed in this group. Highly predictive models characterized by the leave-one out cross-validated $R^2$ ($q^2$) values greater than 0.8 for the training sets and $R^2$ values greater than 0.7 for the test sets have been obtained. The robustness of models was confirmed by the Y-randomization test: all models built using training sets with randomly shuffled activities were characterized by low $q^2{\leq}0.26$ and $R^2{\leq}0.22$ for training and test sets, respectively. Twelve best models (with the highest values of both $q^2$ and $R^2$) predicted the activities of the external validation set of seven compounds with $R^2$ ranging from 0.71 to 0.93.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1998년도 제17회 KOSCI SYMPOSIUM 논문집
• /
• pp.79-84
• /
• 1998

In this paper we show design and operation of 1MWth pulverized coal combustion test facility. The test facility is consists of coal feeding system, furnace and flue gas treatment system. The furnace is equipped with a top-fired burner in order to avoid influence of gravity on the coal particles. There are two part of vertical(VP) and horizontal pass(HP) at furnace. We can measure temperature and species of coal flames in vertical pass. Also, there is horizontally arranged section where investigation regarding corrosion and deposit formation will be carried out. The burner of combustor was externally air staging burner(EASB) type made by IFRF. The pulverized high bituminous(Blair athol) coal from Australia was used as fuel, and the particle size less than 80 ${\mu}m$ was 83.4%. Overall excess air ratio was 1.2.

• 한국입자에어로졸학회지
• /
• 제14권4호
• /
• pp.107-119
• /
• 2018

In this study, we have developed a real-time monitoring device for measuring PM10 and PM2.5 of ambient aerosol particles. The real-time PM monitor (SENTRY Dust Monitor) uses the optical scattering method and has 16 channels in particle size. The laboratory and field tests were carried out to evaluate the developed SENTRY Dust Monitor. Arizona Test Dust particles were used as test particles in the laboratory test and the field test was carried out at the Jongno-gu Observatory in Seoul. The measurements of PM10 and PM2.5 concentrations obtained by SENTTRY Dust Monitor were compared with Grimm Dust Monitor (Model 1.108) and a beta ray gauge. It was shown that the PM10 and PM2.5 concentrations obtained by SENTRY Dust Monitor agree well with that of the reference devices. Based on the results obtained in this study, it could be concluded that the SENTRY Dust Monitor can be used as a PM monitoring device for real-time monitoring of the ambient aerosols.

• 한국작물학회지
• /
• 제37권2호
• /
• pp.171-177
• /
• 1992

실험실에서 실시한 검정으로 Lotus와 Red clover 종자의 포장출현율 예측에 효과적인 검정방법을 구명하기 위하여 상이한 조건에서 재배된 종자를 퇴화조절검정법, 인위노화검정법과 전기전도도 검정방법으로 검정하였다. 이들을 포장출현율과의 관련성을 구명 하였던 바 1. Lotus와 Red clover의 포장출현율을 예측할 때 퇴화조절검정에서는 (equation omitted)=12.786＋0.65X($R^2$=0.687), 인위노화검정에서는 (equation omitted)=25.989＋0.39X($R^2$=0.260), 전기전도도검정에서는 (equation omitted)=141.932-0.86X($R^2$=0.238)으로써 예측할 수 있었으며 2. 이들 세가지 검정에서의 결과와 포장출현율과는 다음과 같은 다중회귀방정식으로 나타낼수 있었다. (equation omitted)=-198.16＋2.3493X$_1$-1.5564X$_2$＋1.981X$_3$($R^2$=0.916) 여기서, X$_1$, 퇴화조절검정법 ; X$_2$, 인위노화검정법 ; X$_3$, 전기전도도검정임. 3. 이러한 결과는 단일검정법으로 실내에서 포장출현율을 예측하려면 인위노화검정법이나 전기전도검정법 보다도 퇴화조절검정법이 비교적 효율이 높았으며, 이들 세가지 방법을 병용할 때에는 단일검정법보다도 효율을 증가시킬수 있었다.

• 동력기계공학회지
• /
• 제12권4호
• /
• pp.26-31
• /
• 2008

The evaporation heat transfer coefficient and pressure drop of R-22 and R-407C in a small diameter copper tube were investigated experimentally. The main components of the refrigerant loop are a receiver, a compressor, a mass flow mete, a condense and a double pipe type evaporate (test section). The test section consists of a smooth copper tube of 4.3 mm inner diameter. The refrigerant mass fluxes were varied from 100 to $300[kg/m^{2}s]$ and the saturation temperature of evaporator were $5[^{\circ}C]$. The evaporation heat transfer coefficients of R-22 and R-407C increase with the Increase in mass flux and vapor quality. The evaporation heat transfer coefficient of R-22 is about $7.3\sim47.1%$ higher than that of R-407C. The evaporation pressure drop of R-22 and R-407C increase with the increase of mass flux. The pressure drop of R-22 is about $8\sim20%$ higher than that of R-407C.

• 설비공학논문집
• /
• 제24권12호
• /
• pp.823-829
• /
• 2012

In this study, the performance of mobile air conditioner(MAC) systems to which the refrigerants R134a and R1234yf were used was evaluated to compare the characteristic of automotive refrigeration cycles with refrigerant. The experimental setup of a MAC consists of an belt driven compressor, a condenser, an evaporator and a block type thermal expansion valve. The drop-in test on MAC were carried out under variable compressor speed from 800 to 2500 rpm. Performance test by using R1234yf and R134a in the same system revealed low the charge amount and mass flow rates for using R1234yf, that is, up to 10% and 17%, respectively. The compressor discharge temperature of R1234yf is $8^{\circ}C$ lower than that of R134a. The cooling capacity with R1234yf system decreased by 4~7% compared with R134a system. In addition, The COP of R1234yf system is lower 3~4% than that of R134a system.

• 설비공학논문집
• /
• 제11권5호
• /
• pp.633-641
• /
• 1999

Experiments were carried out to investigate the condensation heat transfer characteristics for R22 and its alternatives, R407C (R32/125/134a, 23/25/52wt%) and R410A (R32/125, 50/50wt%). A concentric tube heat exchanger was made to conduct condensation heat transfer tests. Mass flux and saturation temperature of refrigerants at the test section inlet were varied to get the corresponding heat transfer coefficients. Serial and parallel input of secondary fluid (water) were applied to the test subsections. Compared with existing correlations of condensation heat transfer, experimental heat transfer coefficients obtained in this study were generally higher than the predicted values, and mean absolute deviations from several correlations were shown. Wall subcooling was introduced to get a new correlation for condensation heat transfer coefficients by modifying Shah's equation. The RMS deviation of the measured heat transfer coefficients from the new correlation in this study for R22 is 9.9% and that for R407C and R410A are 10.2% and 14.6%, respectively.

• 생명과학회지
• /
• 제14권1호
• /
• pp.91-97
• /
• 2004

앞선 연구의 구조적 특성을 근거로 하여, 한 분자내에 MES 유발경련에 작용하는 cyclicimide의 구조를 포함하면, 그들의 구조가 경련 유발 수용체들에 상호 보완적으로 작용, MES및 PTZ유발 경련에 모두 작용할 수 있는 적용 범위가 넓은 항경련성 화합물이 될 수 있을 것으로 생각하여 N-acyl-$\alpha$-aminosuccinimide 1과 N-acyl-$\alpha$-aminoglutar- imide 2 유도체를 합성하였다. 먼저 (R)-2-benzyloxy carbonylamino-succinic acid 3을 출발 물질로 하여 N-acyl-a-aminosuccinimide 1 유도체인 (R)-Benzoic acid 4-benzyloxycarbonyl-amino-2-oxo-pyrrolidin-l-yl ester 6a, (R)4-nitro-benzoic acid 4-benzyloxycarbon-ylamino-2-oxo-pyrrolidin-1-yl ester 6b, (R)-4-nitro-benzoic acid 4-benzyloxycarbonylamino-2-oxo-pyrrolidin-1-yl ester 6c, 그리고 (R)-propionic acid 4-benzyloxycarbonylamino-2-oxo-pyrrolidin-1-yl ester 64를 합성하였다 또한 (R)-3-car-bobenzyloxy-aminoglutarrnic acid 7를 출발물질로 하여 N-acyl-$\alpha$-aminoglutarimide 2유도체인 (R)-(3-Benzyloxycarbonyl-amino-2,6-dioxo-piperidin-1-yloxy)-acetic acid methyl ester 10a, (R)-(3-benzyloxyarbonylamino-2,6-dioxo-piperidin-1-yloxy)-acetic acid ethyl ester l0b, 그리고 (R)-2-(3-benzylox-ycarbonylanino-2,6-dioxo-piperidin-1-yloxy)-propionic acid methyl ester l0c를 합성하였다. 합성된 화합물 6a, 6b, 6c, 6d, 10a, lOb, l0c에 대한 활성평가는 각 단계별 MES test와 PTZ test의 항경련 활성 시험 방법을 가지고 실험할 예정이다.

• 재활치료과학
• /
• 제7권1호
• /
• pp.27-35
• /
• 2018

목적 : 본 연구는 편측 공간무시 환자의 평가도구 중 KF-NAP (Kessler Foundation - Neglect Assessment Process)과 지필검사 (직선이분검사, 글자소거검사, 알버트 검사) 사이의 상관관계와 편측 공간무시에 대한 민감도가 높은 평가도구를 알아보고자 한다. 연구방법 : 2014년 9월부터 2015년 9월까지 서울 소재의 병원 재활의학과에 입원한 32명의 뇌졸중 환자를 대상으로 하였다 (남성 19명, 여성 13명, 평균연령 61.8세). KF-NAP과 지필평가는 입원 7일 이내에 시행하였으며, 각 평가도구의 결과 값으로 편측 공간무시 정도를 비교하였다. 결과 : 편측 공간무시 정도는 KF-NAP 93.8%, 직선이분검사 53.1%, 글자지우기 53.1%, 알버트 검사 37.5%로 편측 공간무시에 대한 민감도가 가장 높은 평가도구는 KF-NAP이었다. KF-NAP은 직선이분검사(r=.430), 글자 지우기(r=.641), 알버트 검사(r=.398) 모두에서 유의한 상관관계가 있었다 (p<0.05). 결론 : KF-NAP은 환자의 일상생활 동안 편측 공간무시를 평가하는 도구로써 지필검사에 비해 편측 공간무시의 진단에 더 민감할 뿐 아니라 편측 공간무시의 중증도에 대한 평가가 가능하다. 따라서 편측 공간무시의 평가에 KF-NAP이 유용하게 사용되어져야 한다.