• 제목/요약/키워드: R-phase

검색결과 3,487건 처리시간 0.034초

자재취급 지연을 고려한 자동창고의 저장능력 추정 (Storage Capacity Estimation for Automated Storage/Retrieval Systems Considering Material Handling Delay)

  • 조면식
    • 한국시뮬레이션학회논문지
    • /
    • 제10권3호
    • /
    • pp.71-82
    • /
    • 2001
  • Considering material handling delay which occurs between storage and processing stations, we propose an algorithm to estimate the required storage capacity, i.e., number of aisles and number of openings in vertical and horizontal directions in each aisle, of an automated storage/retrieval(AS/R) system. Due to the random nature of storage and retrieval requests, proportion of single and dual commands is not known in advance. Two design criteria, maximum permissible overflow probability and maximum allowable storage/retrieval(S/R) machine utilization, are used to compute the storage capacity. Most of studies assume that storage capacity of AS/R systems is given, although it is a very important decision variable in the design phase. Therefore, the proposed model can be effectively used in the design phase of new AS/R systems.

  • PDF

중계기 선택 기법이 적용된 증분 협력 통신의 중계기 배치에 따른 성능 분석 (Performance Analysis of Incremental Cooperative Communication with Relay Selection Based on The Relays Arrangement)

  • 김렴;공형윤
    • 한국전자파학회논문지
    • /
    • 제22권10호
    • /
    • pp.941-950
    • /
    • 2011
  • 본 논문에서는 중계기 선택 기법이 적용된 증분 협력 통신의 단-대-단 성능을 분석한다. 일반적인 협력 통신은 1 phase에 송신단(S)에서 전송하는 신호를 수신단(D)이 한 번 수신하고, 2 phase에 중계기(R)로부터 S에서 전송한 신호를 재 전송받게 된다. 이러한 과정을 통해 D는 다이버시티 이득을 얻음으로써 수신 성능이 향상되지만, 두 번에 걸친 전송은 스펙트럼 효율성을 감소시킨다. 하지만 증분형 중계 기법을 적용한 협력 통신에서 D는 1 phase에 수신한 신호만으로 복호에 성공할 수 있다고 판단되면, 두 번째 전송을 생략함으로써 이러한 단점을 보완할 수 있다. 증분형 중계 기법에서 D는 ACK/NACK 메시지를 전송하는 ARQ(Automatic Repeat reQuest) 기법을 이용한다. 본 논문에서는 D가 첫 번째 시간 슬롯에 수신한 신호를 복호할 수 있는지를 판단하기 위해 임계 SNR을 이용한 ARQ 기법과 채널 부호화를 이용한 HARQ(Hybrid Automatic Repeat reQuest) 기법과 같이 두 가지 방법을 고려한 시스템에 참여하는 중계기 배치에 따른 성능을 분석하고, 중계기 배치가 성능에 미치는 영향에 대해 연구한다.

무반사 면을 갖는 DFB 레이저의 발진 모드와 빔 분포 해석 (Lasing mode and Beam Profile Analysis of DFB Laser with an Anti-reflection Coated Mirror)

  • 권기영
    • 문화기술의 융합
    • /
    • 제6권4호
    • /
    • pp.727-732
    • /
    • 2020
  • 본 연구에서는 1.55um의 파장을 갖는 DFB 레이저에서 굴절률 격자와 이득 격자가 동시에 존재할 때, 오른쪽 거울 면에 반사가 일어나지 않도록 유전막 코팅을 하여 𝜌r=0 이 되도록 하였다. δL > 0인 경우일 때, 문턱에서 발진 모드에 대하여, 발진 이득과 종 방향으로의 발진 모드의 빔 분포와 방사전력비 Pl/Pr를 𝜌l의 위상=π인 경우와 𝜌l의 위상=π/2인 경우에 대하여 비교했다. 𝜌l의 위상=π인 경우, 낮은 문턱 전류와 높은 주파수 안정성을 얻기 위해서는, κL이 8보다 커야 한다. 𝜌l의 위상=π/2인 경우, κL = 4보다 커지면서 𝜌l의 위상=π인 경우보다 발진 이득이 낮아지기 시작함을 볼 수 있고, 발진 모드의 문턱 전류를 낮추고 주파수 안정성을 높이기 위해서는, κL이 8보다 커야한다.

Rhodotorula rubra의 항원특성에 관한 연구 (A Study on the Antigen Characteristics of Rhodotorula rubra)

  • 권혁구;이장훈;염곤
    • 한국환경보건학회지
    • /
    • 제28권5호
    • /
    • pp.28-34
    • /
    • 2002
  • Antigenicity of Rhodotrula rubra isolated from pulmonary tissue of pulmonary tuberculosis patients was studied by means of agglutination reaction with R. rubra whole cell antiserum. And the serological reactivity of crude polyfac charide from R. frubra, Candida albicans, Candida tropicalis, Candida, glabrata, and Saccharomyces cerevisiae ATCC 26603 with antiserum to R. rubra whole cell was studied by means of immunodiffusion test. R. rubra showed stationary phase after 48h when it was cultured in GYEP broth. While agglutinogen titer was 1:64 at lag phase, agglutinogen titer was 1 :256 after 20h. After growth of R. rubra on different 11 media, nutritional environment showed similar agglu-tination reartivity. The agglutinogen titer of C. albicans, C. tropicalis, C. giabrata, which were isolated from patient's expectoration, to R. rubra antiserum by means of agglutination reaction were 1:16, respectively. But, Sacch. cervisiae ATCC26603 was negative. Those results were lower than that of R. rubra agglutinogen titer 1:256. As a result of immu-nodiffusion test with crude polysaccharide extracted from cell wall of R. rubra, C. albicans, C. tropicalis, C. glabrata, Sacch. cervisiae ATCC26603, precipitin line was found only with R. rubra, of which antibody titer was 8.

The Magnetic and Magnetostrictive Properties of Melt-Spun Ribbons of B Containing Terfenol-D Alloys

  • Kim, S. R.;S. Y. Kang;S. H. Lim
    • Journal of Magnetics
    • /
    • 제2권1호
    • /
    • pp.1-6
    • /
    • 1997
  • The magnetic and magnetostrictive properties of melt-spun ribbons of the alloys (R0.33Fe0.67)1-xBx (R=Tb0.3Dy0.7 and 0$\leq$x$\leq$0.06) are ivestigated as a function of wheel speed during melt-quenching. The saturation magnetiation of the alloys with a crystalline phase ranges from 70 to 80 emu/g and does not vary substantially with the B content. The saturation magnetization of an amorphous phase, which is formed at the condition of thigh wheel speed and high B content, is reduced significantly, however. The coercive force is minimum at x= 0.02 and increases monotonously with the further increase of B content when the microstructure mainly consists of a crystalline phase, but again it is reduced significantly by the formation of an amorphous phase. The low field sensitivity of magnetostriction with magnetic field is found to be good for the alloys with x$\leq$0.04 over a wide range of wheel speed. This magnetostrictive behavior is in contrast with that observed previously for Dy-Fe and Tb-Fe based alloys and is thought to be due to low intrinsic magnetocrystalline anisotropy of the compound.

  • PDF

Analysis of Cationic Surfactants in Cosmetics By Reverse phase Ion-Pair Chromatigraphy with Suressed Conductivity Detector and UV Detector

  • Jong-Keun Choi;Jae
    • 대한화장품학회지
    • /
    • 제23권3호
    • /
    • pp.161-167
    • /
    • 1997
  • Determination of several cationic surfactants in cosmetics has been investigated. Reverse phase ion pair chromatography was used to identify and quantitate cationic surfactants. Cationic surfactants analyzed in this experiment were cetylpyridium chloride, stearyltrimetylammonium chloride, bezalkonium chloride, benzyldicethylcetylammonium chloride, and bihenyltrimethyl ammonium chloride. The separation was achieved on a reverse phase coumn with 10mM HCl-acetonitrile eluent. In this condition, the most of cationic surfactants with exception of CPC and CTAC respectively with suppressed conductivity detector and UV detector connected in series. The calibration curves obtained by plotting the peak areas of the cationic surfactants were linear at levels ranging from 0.005 to 0.1% correlation coefficient, r=0.9988. The detection limits were 1 to 5ppm in sample solution. The average recoveries of cationic surfactants added to hair treatment cream and hair rinse in three to five experiments were 96.7 105.2% and relative standard deviations were 1.1-3.8%. The case that there were CPC and CTAC in same solution was also tested. CPC and CTAC which couldn't be separated on reverse phase column were quantitated with suppressed conductivity detector and UV detector connected in series. Recovery of CPC and CTAC were 101.6 and 89.2% respectively. The proposed method was applied to the determination of cationic surfactants in commercial hair treatment cream.

  • PDF

세관 내 액단상 열전달 및 압력강하 특성에 관한 연구 (Study on the Single-Phase Heat Transfer and Pressure Drop Characteristics of R-718 in Small Diameter Tubes)

  • 홍진우;정재천;김종렬;노건상;구학근;오후규
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집D
    • /
    • pp.425-432
    • /
    • 2001
  • Single-phase heat transfer coefficients and pressure drops of R-22 were measured in smooth, horizontal copper tubes with inner diameters of 3.36 mm, 5.35 mm, 6.54 mm and 8.12 mm, respectively. The experiments were conducted in the closed loop, which was driven by a magnetic gear pump. Data are presented for the following range of variables: Reynolds from 1000 to 20000. Single-phase heat transfer coefficients increased by $10{\sim}30%$ as the inner diameter of tube was reduced and it was found that a well-known previous correlation, Gnielinski's correlation, was not suitable for the small diameter tubes. But the pressure drop in the small diameter tubes have been shown slightly deviations with Blauius' correlation. Based on an analogy between heat and mass transfer, the new heat transfer correlation is proposed to predict the experimental data successfully.

  • PDF

가속 방사광을 활용한 Fe함유 Al-Si-Cu 주조용 합금의 응고과정 실시간 관찰 및 분석 (Real-time Observation and Analysis of Solidification Sequence of Fe-Rich Al-Si-Cu Casting Alloy by Synchrotron X-ray Radiography)

  • 김봉환;이상환;야스다 히데유키;이상목
    • 한국주조공학회지
    • /
    • 제30권3호
    • /
    • pp.100-110
    • /
    • 2010
  • The solidification sequence and formation of intermetallic phase of Fe-rich Al-Si-Cu alloy were investigated by using real-time imaging of synchrotron X-ray radiation. Effects of cooling rate during uni-directional solidification on the resultant solidification behavior was also studied in a specially constructed vacuum chamber in the SPring-8 facility. The series of radiographic images were complementarily analyzed with conventional analysis of OM and SEM/EDX for phase identification. Detailed solidification sequence and formation mechanisms of various phases were discussed based on real-time image analysis. The growth rates of $\alpha$-AlFeMnSi and ${\beta}-Al_5FeSi$ were measured in order to understand the growth behavior of each phase. It is suggested that real-time imaging technique can be a powerful tool for the precise understanding of solidification behavior of various industrial materials.

서울 대기 중 PCBs의 온도 의존성 (Temperature Dependence of PCBs in Urban Area of Seoul City)

  • 여현구;최민규;천만영;김태욱;선우영
    • 한국대기환경학회지
    • /
    • 제18권3호
    • /
    • pp.193-204
    • /
    • 2002
  • To investigate the relationships between the atmospheric concentrations of PCBs and temperature, quantity of both parameters was performed at an urban site in Korea from July 1999 to January 2000. The strength of correlations between total PCB and temperature was found to be significant (r = 0.752, p < 0.001). It hence indicates that total PCB contents were affected sensitively by temperature change during the sampling period. The ratio of PCB homologs and Deca-CB(PCB 209) also behaved quite similarly to the change of temperature (r>0.60, p<0.05). This may be inferable with the progress of the gas/particle partitioning to the gas phase, especially for fri-and tetra-CBs. Because they have high vapor pressure, they generally exist in the gas phase. The Clausius-Clapeyron equation was applied to the atmospheric PCB data, relating PCB partial vapor pressure to inverse temperature. This may essentially represent the temperature-controlled transition between condensed phase and atmospheric gas phase. The slopes of the resulting plot with International Council for the Explanation of the Seas (ICES) congener ranged from -2810 to -5887, with significantly steep slope and $R^2$(p< 0.005) It was inferred that the PCB atmospheric concentration was also affected by change in the surrounding conditions such as soil, lakes and trees.

Function of Cell-Bound and Released Exopolysaccharides Produced by Lactobacillus rhamnosus ATCC 9595

  • Kim Ji-Uk;Kim Young-Hoon;Han Kyoung-Sik;Oh Se-Jong;Whang Kwang-Youn;Kim Jai-Neung;Kim Sae-Hun
    • Journal of Microbiology and Biotechnology
    • /
    • 제16권6호
    • /
    • pp.939-945
    • /
    • 2006
  • The physiological characteristics and function of the exopolysaccharide (EPS) produced by Lactobacillus rhamnosus ATCC 9595 were determined. The total quantity of EPS was rapidly increased to 496$\pm$20 mg/l during the exponential phase, and then maintained steadily during the stationary phase. During the exponential phase (18 h), the total EPS consisted of 61% cell-bound EPS (cb-EPS) and 39% released EPS (r-EPS), whereas the relative proportion of EPS during the stationary phase (48 h) was convered to 23% cb-EPS and 77% r-EPS. On gel permeation chromatography, cb-EPS was fractionated as a single peak of 8.6$\times10^6$ Da, whereas r-EPS was fractionated as two peaks with average molecular weights of 4.3$\times$10$^4$ and 8.6$\times10^6$ Da. Interestingly, both EPS species exhibited anticancer properties and cholera toxin-binding activities. Our results suggest that the EPS generated by L. rhamnosus ATCC 9595 might be suitable for use as a functional food or food supplement.