• Korean Journal of Human Ecology
• /
• v.21 no.5
• /
• pp.989-1004
• /
• 2012

The purpose of this study was to investigate the characteristics of the pigment and the dyeability of juniperus chinensis needles, berry, bark and heartwood extracts using distilled water, methanol, normal butanol and ethyl acetate as a solvent. Ultraviolet-visible absorption spectrum bands of the extracts were measured at around 280nm to 320nm in all the solvent extracts. The maximum absorption wavelength was able to determine tannin. All the solvent extracts except for distilled water extracts were able to confirm the presence of chlorophyll. Infrared absorption spectra (FT-IR) of all parts of the extracts showed broad absorption bands of OH due to phenolic-OH, benzene CH peak of phenol chemical structure, ether-based stretching vibration peak and the peak of flavonoid compounds that appeared in all the solvent extracts. The yield of juniper needles and heartwood in distilled water and methanol extraction were effective. Extraction of berry yields in distilled water was also effective. The yield of ethanol extraction from the bark showed better efficiency. As a result of using distilled water for the dye solution, the color of the fabrics dyed with all extracts of the needles and Y series berries generally showed light Y progression with a strong red tinge. By using a mixture of 20% ethanol and 80% distilled water for the dye solution, the color of the fabrics dyed with needles and berry extracts showed Y series dominantly. The color of the fabrics dyed with Bark and heartwood extracts were dominantly R series.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.11 s.102
• /
• pp.1123-1130
• /
• 2005

In this paper, we propose an improved side information processing scheme which is important in the sub-block phase weighting(SPW) method for the peak-to-average power ratio(PAPR) reduction. SPW method is to divide the input OFDM subchannels into several subblocks and to multiply phase weighting with each subblocks, properly for the reduction of the peak power. SPW method is similar to the conventional PTS method when the number of sub-carriers, signal modulation format and the number of subblocks are the same. However, unlike the conventional PTS(Partial Transmit Sequence) and SLM(Selected Mapping) method using many stages of IFFT(Inverse Fast Fourier Transform), SPW method only needs one IFFT. Although PAPR can be reduced by SPW method, complex computation burden still remains. In this paper the flipping algorithm and the full iteration algorithm are used f3r the phase control method. Through the computer simulation, we analyze and discuss the properties and the performance of the suggested method.

• The Journal of Korean Physical Therapy
• /
• v.13 no.1
• /
• pp.19-31
• /
• 2001

The twenty one individuals with total knee replacement who were admitted to Kang-Dong Hospital for comprehensive physical therapy were studied in order to demonstrate the effectiveness of an isokinetic test program using the Cybex 6000 machine. The subjects were divided into three groups with the isometric exercise group receiving isometric exercise. the isokinetic eccentric exercise group, and isokinetic eccentric exorcise group receiving isokinetic exercise(eccentric. concentric) to knee flexors and extensors muscles for a six weeks period using the Cybex 6000. The results were follow :1 . The peak torque was increased significantly in the flexors and extensors of the isokinetic conccentric exorcise among three groups(p<.05). 2. The progress of peak torque was increased significantly in the flexors and extensors of the isokinetic conccentric exercise among three groups(p<.05). 3. The total work was more increased significantly in the flexors and extensors of the isokinetic conccentric exercise among three groups(p<.05). 4. The progress of total work was more increased significantly in the flexors and extensors of the isokinetic conccentric exercise among three groups(p<;.05). 5. The ratio of endurance was not increased significantly in all three groups. 6. The extensors in the peak torque was likely to recover rapidly than the flexors. 7.The average R.O.M in the pre-exercise and post-exercise was not different significantly in all three groups. According to the above results, In the muscle strength recovery for total knee replacement patients, isokinetic concentric exercise group was significantly greater than the isokinetic eccentric and isometric exercise groups after a six weeks training.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.420-420
• /
• 2012

ZnO seed layer were deposited on quartz substrate by sol-gel method and prism-like Al-doped ZnO nanorods (AZO nanorods) were grown on ZnO seed layer by hydrothermal method with various Al concentration ranging from 0 to 2.0 at.%. Structural and optical properties of the AZO nanorods were investigated by field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), photoluminescence (PL). The diameter of the AZO nanorods was smaller than undoped ZnO nanorods and its diameter of the AZO nanorods decreased with increasing Al concentration. In XRD spectrum, it was observed that stress and full width at half maximum (FWHM) of the AZO nanorods decreased and the 'c' lattice constant increased as the Al concentration increased. From undoped ZnO nanorods, it was observed that the green-red emission peak of deep-level emission (DLE) in PL spectra. However, after Al doping, not only a broad green emission peak but also a blue emission peak of DLE were observed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.3
• /
• pp.260-266
• /
• 2013

The study was carried out to determine the gel pasting properties of barley (Hordeum vulgare L. cv. Geoncheonheugbori) as affected by different proton beam irradiation. The ${\lambda}max$, blue value, and amylose content were significantly associated with increasing proton beam irradiation. The pasting time in barley flour irradiated with proton beam ranged 0.09 to 0.16 min shorter than nonirradiated barley flour. Gel pasting temperature ranged 57.4 to $60.5^{\circ}C$. Gel pasting temperature in barley flour decreased with increasing proton beam irradiation. Proton beam irradiation caused a significant decrease in the onset temperature (To), peak temperature (Tp), conclusion temperature (Tc) and enthalpy change (${\Delta}H$). Gelatinization range (R) in barley starch was more broaden than that of non-irradiated barley starch. Barley starches gave the strong diffraction peak at around $2{\Theta}$ values$15^{\circ}$, $18^{\circ}$, $20^{\circ}$, and $23^{\circ}$ $2{\Theta}$. Peak intensity tended to increase with increased proton beam irradiation. The granule crystallinity is closely associated with decreased amylose and increased amylopectin component. The crystallinity degree of barley starch irradiated with proton beam was significantly increased and it ranged from 24.9 to 32.9% compared to the non-irradiated barley starches. It might be deduced that proton beam irradiation causes significant changes of properties of starch viscosity in rice, especially at high irradiation of proton beam.

• The Korean Journal of Mycology
• /
• v.14 no.1
• /
• pp.61-70
• /
• 1986

Sterigmatocystin bears a close structural relationship to aflatoxin $B_1$ and is a carcinogenic compound that has been shown to affect various species of experimental animals. Reaction and toxicity of sterigmatocystin in the artificial gastric juice were investigated. Sterigmatocystin was degraded in artificial gastric juice and extracted by the method of A.O.A.C. After cleaned up by silica gel column chromatography, this substance was detected and characterized by thin layer chromatography, UV, IR and mass spectra. It showed $R{\mathcal{f}}$ 0.4 and brick-red color by TLC. Especially, in the mass spectrum of it, fragment peak at m/e 327 was due to the loss of the $-CH_3$ and $-H_2O$, fragment peak at m/e 341 was due to the loss of the $H_2O$ and $-H^+$, and fragment peak at m/e 239 was due to the loss of the 2-chloro-tetrahydrofuran and methyl group from the parent molecule. Therefore, a degraded substance of sterigmatocystin reacted in artificial gastric juice (Sub. K) was estimated with additional formation of hydrochloric acid. In four-day-old chicken embryos, the mean lethal dose $(LD_{50})$ was $140\;{\mu}g/egg$, and 90 to 100% of the embryos were killed with 1 mg/egg. This $LD_{50}$ $140\;{\mu}g/egg$ compared with an $LD_{50}$ $14.69\;{\mu}g/egg$ for sterigmatocystin (acute toxicity) showed the substance to be much less toxic than sterigmatocystin.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.5
• /
• pp.42-48
• /
• 2008

This study was conducted to discuss the effects of hardener and extender contents on peak temperature, reaction enthalpy (${\Delta}H$), gelation time, viscosity change, and pH value in three types of UMF (urea-melamine- formaldehyde) resin with the help of perpHecT LogR meter, differential scanning calorimetry (DSC), and advanced rheometric expansion system (ARES), The results indicated that the pH value of Control A steeply decreased to 5,2 in the early stage but relatively remained constant thereafter as in Synthesis 1 and Synthesis 2, The peak temperature and time decreased as well, whereas ${\Delta}H$ and viscosity increased with the increase of hardener content. On the other hand, ${\Delta}H$ was not changed up to the extender content of 5% and then decreased with its further addition, And the pH value and peak temperature showed no change with the increase of extender content at the hardener content of 5% in three types of UMF resin, The effect of hardener content in this experiment, however, appeared more conspicuous in Control A than in the other two types of Synthesis 1 and Synthesis 2, These results might be caused by higher molecular weight with longer chains of methylene ($-CH_2-$) and methylene ($-CH_2-O-CH_2-$) ether bridges or much more branched chains in Control A.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.23 no.3
• /
• pp.78-87
• /
• 1981

This study was attempted to get dimensionless unit hydrograph by linear model which can be used to the estimation of flood for the development of Agricultural water resources and laid emphasis on the application of dimensionless unit hydrographs for the ungaged watersheds by applying linear model. The results summarized through this study are as follows. 1.Peak discharge is found to be Qp= CAR (C =0. 895A-o.145) having high significance between peak discharge, Qp and effective rainfall, R within the range of small watershed area, 84 to 470km2. consequently, linearity was acknowledged between rainfall and runoff. Reasonability is confirmed for the derivation of dimensionless unit hydrograph by linear model. 2.Through mathematical analysis, formula for the derivation of dimensionless unit hydrograph was derived. qp--p=(tp--t)n-1[e-(n-1)](tp--t-1) 3.Moment method was used for the evaluation of storage constant, K and shape parameter, n for the derivation of dimensionless unit hydrograph. Storage constant, K is more closely related with the such watershed characteristics as length of main stream and slopes. On the other hand, the shape parameter, n was derived with such watershed characteristics as watershed area, river length, centroid distance of the basin and slopes. 4.Time to peak discharge, Tp could be expressed as Tp=1. 25 (√s/L)0.76 having a high significance. 5.Dimensionless unit hydrographs by linear model stood more closely to the observe dimensionless unit hydrographs On the contrary, dimensionless unit hydrographs by S.C. S. method has much difference in comparison with linear model at the falling limb of hydrographs. 6.Relative errors in the q/qp at the point of 0.8 and 1.2 for the dimensionles ratio by linear model and S. C. S. method showed to be 2.41, 1.57 and 4.0, 3.19 percent respectively to the q/qp of observed dimensionless unit hydrographs. 7.Derivation of dimensionless unit hydrograph by linear model can be accomplished by linking the two empirical formulars for storage constant, K, and shape parameter, n with derivation formular for dimensionless unit hydrograph for the ungaged small watersheds.

• Journal of Korean Society on Water Environment
• /
• v.21 no.3
• /
• pp.277-283
• /
• 2005

This paper aimed to compare the daily water quality as well as the hydrological data gathered for the past two years (2000 to 2001) between the two influent rivers of Paldang reservoir. The analysis also has been carried out to draw out the factors that affect the water quality at the dam site, where the main drinking water drawing point is located. The relationship between total amount of monthly rainfall and monthly inflow showed $r^2=0.74$ (p<0.05). The highest peak of inflow of influent rivers recorded in August and September (in the year of 2000) and July and August (2001). Average inflows of influent rivers in 2000 and 2001 are calculated at 209.0, 161.5 CMS (Bughangang), 268.6, 148.2 CMS(Namhangang), and 7.8, 5.0 CMS (Gyeongancheon). The formula which was driven from the relationship between inflow and COD load of influent rivers, explained that COD concentration in general increased with the inflow. But during the rainy seasons (July, August, and September), COD concentration decreased according to the increase of inflow. The daily rainfall and COD concentration(or load) during the rainy season (August and September in the year of 2000, July and August in 2001) indicated that the peak of COD load correspond with the rainfall, which decreased sharply after 3 or 4 days. The reason was thought that the high COD load was diluted rapidly by the rain flow. Water temperature, pH and conductivity measured at dam site decreased obviously when the inflow sharply increased. Peak period of total phosphorus concentration coincided with that of inflow. In rainy season, chlorophyll-a concentration decreased obviously as the inflow increased. The reason can be ascribed to the flushing effect caused by the operation of floodgate.

• Safety and Health at Work
• /
• v.10 no.1
• /
• pp.47-53
• /
• 2019

Background: Despite growing concern over occupational exposure to particulate matter (PM) such as grain dust and diesel exhaust, information about the exposure level and health implications among workers in small-scale milling enterprises in developing countries like Nigeria has not been adequately documented. The purpose of this study was to assess the level of exposure to grain dust and diesel exhaust and effect on lung function among grain millers in food markets in Ibadan metropolis, Nigeria. Methods: The study adopted descriptive cross-sectional design with a comparative approach. Sixteen grain milling shops each were randomly selected from two major food markets in Ibadan metropolis for indoor $PM_{10}$ and $PM_{2.5}$ monitoring. Seventy-two respondents each were proportionately selected from grain millers and shop owners for forced expiratory volume in one second and peak expiratory flow rate tests. Results: The $PM_{2.5}$ concentrations for both market locations ranged between 1,269.3 and $651.7{\mu}g/m^3$, while $PM_{10}$ concentrations were between 1,048.2 and $818.1{\mu}g/m^3$. The recorded concentrations exceeded the World Health Organization guideline limit of $50{\mu}g/m^3$ and $25{\mu}g/m^3$ for $PM_{2.5}$ and $PM_{10}$, respectively. As compared with control group (2.1 L), significantly lower forced expiratory volume in one second value (1.61 L) was observed among the exposed group (p < 0.05). Likewise, significantly lower peak expiratory flow rate value (186.7 L/min) was recorded among the exposed group than the control group (269.51 L/min) (p < 0.05). Conclusion: Exposure to grain dust and diesel exhaust accentuated respiratory disorders with declines in lung functions amongst grain millers. Improved milling practices and engaging cleaner milling facilities should be adopted to minimize exposure and related hazards.