• Journal of Environmental Health Sciences
• /
• v.40 no.3
• /
• pp.215-224
• /
• 2014

Objective: This study was carried out in order to determine the depositional characteristics of pine needles, pine bark, and soil used as a passive air sampler (PAS) for atmospheric polybrominated diphenyl ethers (PBDEs). Methods: All three media were sampled from the same site. The PBDE concentrations were analyzed by HRGC/HRMS, and the lipid contents were measured using the gravimetric method by n-hexane extraction. Results: The total PBDE concentration was the highest in soil (22,274.57 pg/g dry), followed by pine bark (20,266.39 pg/g dry), and then pine needles (7,380.22 pg/g dry). Pine needles contained the highest lipid contents (21.31 mg/g dry), whereas soil (10.01 mg/g dry), and pine bark (4.85 mg/g dry) contained less. There were poor correlations between lipid content and total PBDE concentrations in the media ($R^2$=0.8216, p=0.2814). Congeners BDE 47, 99, 183, 196, 197, 206, 207 and 209 showed peak concentrations. Among these, BDE 206, 207, and 209 are highly brominated PBDEs that exist as particulates in ambient air. They accounted for 81.2% [69.2 (pine needles) - 89.0% (tree bark)] of the concentration and therefore are noted as the main congener of the total PBDEs. Conclusions: It can therefore be concluded that for reducing error by improper sampling, the same species of media should be recommended for use as a PAS for atmospheric PBDEs due to the differences in depositional characteristics.

• Korean journal of applied entomology
• /
• v.23 no.2 s.59
• /
• pp.132-136
• /
• 1984

This study was conducted to investigate the bionomics of Curculio sikkimensis in Chonnam province from 1981 to 1983. Damage rates of the chestunt were $26.4\%$ in Damyang, $21.1\%$ in Gwangyang, and $12.9\%$ in Seungju. Adults occurred from the mid-July to the mid-September and showed peak from the mid-August to the early-September. Larvae escaped the chestnut from the early-October to the early-November. Overwintering larvae emerged $3.3\%$ in the first year, $22.78\%$ in the second year and continously overwintered $1.67\%$ in the third year. Larvae showed the highest distribution at $1.67\%$ of soil depth during the overwintering. Mortality of overwintering larvae and course of time showed the linearly correlation. Period of each stage was 5.9 days for egg and 17.17 days for pupa. Adult longevity was 9.10 days for female and 7.03 days for male.

• Korean journal of applied entomology
• /
• v.3
• /
• pp.15-19
• /
• 1964

1. The heat output by the insects, Oryzaephilus surinamensis, Tribolium confusum, Sitophilus zeamais and Sitophilus granarius, was investigated by reading the temperature of the inside of the grain in which the insects were developing in 2 Ib or 7 Ib jars incubated at $25^{\circ}C\; and\; 70\%$ R.H. 2. All the insects tested increase the temperature of grain, but the amount of heat produced by insects varies with the species of and the developmental stages of the insects. 3. It was found that all the temperature peaks correspond with the peak in number of the fourth instar larvae and the period in which the insects start to cause the heating corresponds to its 1 st and 2nd instar larvae. 4. Sitophilus spp. whose larvae live in the endosperm of the wheat produced more heat than Tribolium confusum and Oryzaephilus surinamensis whose larvae live on the grain. 5. Among the four species of insects, Sitophilus zeamais Produces the highest heat, followed by Sitophilus granarius, Tribolium confusum and Oryzaephilus surinamensis. 6. It is considered from the above results that the heat produced by insects seems to depend upon the species, the number and the age structure of population, and its its surroundings. 7. It is suggested therefore that when comparing the rate of development of insects kept at different densities. the effects caused by heating at the higher densities must be considered.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.6
• /
• pp.100-105
• /
• 2017

This work presents an ECG biometric recognition system for the purpose of biometric authentication. ECG biometric approaches are divided into two major categories, fiducial-based and non-fiducial-based methods. This paper proposes a new non-fiducial framework using discrete cosine transform and a Random Forest classifier. When using DCT, most of the signal information tends to be concentrated in a few low-frequency components. In order to apply feature vector of Random Forest, DCT feature vectors of ECG heartbeats are constructed by using the first 40 DCT coefficients. RF is based on the computation of a large number of decision trees. It is relatively fast, robust and inherently suitable for multi-class problems. Furthermore, it trade-off threshold between admission and rejection of ID inside RF classifier. As a result, proposed method offers 99.9% recognition rates when tested on MIT-BIH NSRDB.

• Korean Journal of Ichthyology
• /
• v.28 no.4
• /
• pp.273-278
• /
• 2016

The seasonal variations in species composition and abundance of the fish assemblage were studied in the rocky subtidal habitat around the Jam-do, Jinhae. Fish samples were collected monthly from September 2007 to July 2008 using a pot. During study, a total of 48 fish species belonging to 24 families were collected. The dominant species were Sebastes longispinis, Pseudoblennius cottoides, Sebastes inermis, Rudarius ercodes, Ditrema temminckii, Ernogrammus hexagrammus, which accounted for 71.0% of the total number of individuals collected. The number of species, number of individuals, biomass and diversity greatly fluctuated showing a peak in the number of species, number of individuals and species diversity in autumn, whereas the biomass was the highest in spring. Abundance of dominant species varied with season. S. longispinis was abundant during spring and summer, while the abundance of P. cottoides was higher during autumn and spring. S. inermis occurred with high number in September, December and May, whereas R. ercodes occurred exclusively during autumn.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.2
• /
• pp.91-96
• /
• 2011

The purpose of this study was to minimize of entrance surface dose (ESD) at the eye using high kVp technique in the computed radiography. We used REX-650R (Listem, Korea) general X-ray unit, and external detector with ESD dosimeter of Piranha 657 (RTI Electronics, Sweden). We used head of the whole body phantom. The total 64 images of X-ray anterior-posterior of skull were acquired using the film/screen (F/S) method and the digital of computed radiography method. The three radiology professor of more 10 years of clinical career evaluated a X-rays images in the same space by 5-point scale. The external detector was performed measurement of ESD of three times by same condition on the eye of the head phantom. The good image quality in the F/S method (90 kVp, 2.5 mAs) showed at the minimized ESD of 0.310 ${\pm}$ 0.001 mGy. the good image quality in the computed radiography method (90 kVp, 2.0 mAs) showed at the minimized ESD of 0.180 ${\pm}$ 0.002 mGy (P = 0.002). Finally the radiation dose could reduced about 50% in the computed radiography method more than the F/S method. In addition the eye entrance surface dose using high kVp technique with the computed radiography was reduced 92% more than conventional technique (F/S method).

• Bulletin of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.137-144
• /
• 2009

In this study, quantitative and pattern recognition analyses for the quality evaluation of Herba Epimedii using HPLC was developed. For quantitative analysis, five major bioactive constituents, hyperin, epimedin A, epimedin B, epimedin C, and icariin were determined. Analysis was carried out on Capcell pak $C_{18}$ column ($250{\time}4.6$ mm, 5 ${\mu}m$) with a mobile phase of mixture of acetonitrile and 0.1% formic acid, using UV detection at 270 nm. The linear behavior was observed over the investigated concentration range (2-50 ${\mu}g/mL;\;r_2\;>$ 0.99) for all analytes. The intraand inter-day precisions were lower than 4.3% (as a relative standard deviation, RSD) and accuracies between 95.1% and 104.4%. The HPLC analytical method for pattern recognition analysis was validated by repeated analysis of one reference sample. The RSD of intra- and inter-day variation of relative retention time (RRT) and relative peak area (RPA) of the 12 selected common peaks were below 0.8% and 4.7%, respectively. The developed methods were applied to analysis of twenty Herba Epimedii extract samples. Contents of hyperin, epimedin A, epimedin B, epimedin C, and icariin were calculated to be 0$\sim$0.79, 0.69$\sim$1.91, 0.93$\sim$9.58, 0.65$\sim$3.05, and 2.43$\sim$11.8 mg/g dried plant. Principal component analysis (PCA) showed that most samples were clustered together with the reference samples but several apart from the main cluster in the PC score plot, indicating differences in overall chemical composition between two clusters. The present study suggests that quantitative determination of marker compounds combined with pattern-recognition method can provide a comprehensive approach for the quality assessment of herbal medicines.

• Journal of Radiation Protection and Research
• /
• v.42 no.1
• /
• pp.48-55
• /
• 2017

Background: Simultaneous detection of neutrons and gamma rays have become much more practicable, by taking advantage of good gamma-ray discrimination properties using pulse shape discrimination (PSD) technique. Recently, we introduced a commercial CLYC system in Korea, and performed an initial characterization and simulation studies for the CLYC detector system to provide references for the future implementation of the dual-mode scintillator system in various studies and applications. Materials and Methods: We evaluated a CLYC detector with 95% $^6Li$ enrichment using various gamma-ray sources and a $^{252}Cf$ neutron source, with validation of our Monte Carlo simulation results via measurement experiments. Absolute full-energy peak efficiency values were calculated for gamma-ray sources and neutron source using MCNP6 and compared with measurement experiments of the calibration sources. In addition, behavioral characteristics of neutrons were validated by comparing simulations and experiments on neutron moderation with various polyethylene (PE) moderator thicknesses. Results and Discussion: Both results showed good agreements in overall characteristics of the gamma and neutron detection efficiencies, with consistent ~20% discrepancy. Furthermore, moderation of neutrons emitted from $^{252}Cf$ showed similarities between the simulation and the experiment, in terms of their relative ratios depending on the thickness of the PE moderator. Conclusion: A CLYC detector system was characterized for its energy resolution and detection efficiency, and Monte Carlo simulations on the detector system was validated experimentally. Validation of the simulation results in overall trend of the CLYC detector behavior will provide the fundamental basis and validity of follow-up Monte Carlo simulation studies for the development of our dual-particle imager using a rotational modulation collimator.

• Clinical and Experimental Reproductive Medicine
• /
• v.21 no.3
• /
• pp.241-245
• /
• 1994

Despite increasing success rate of IVF, poor response to ovarian stimulation remains a problem. So, attempts to improve ovarian responses, for example, by using combined gonadotropin-releasing hormone analogue(GnRH-a) and human menopausal gonadotropin(hMG) have shown limited success. It is reported that response of granulosa cells in vitro to FSH is stimulated by co-incubation with IGF-l, and IGF-l production can be increased by growth hormone. This suggest that combination regimen of G.H. and hMG may augment follicle recruitment. In fifteen patients who had previous history of poor ovarian response to gonadotropin stimulation after pituitary suppression with mid -luteal GnRH-a, the effectiveness of cotreatment with G.H. in IVF program was evaluated using a combination regimen of G.R. and hMG at Korea University Hospital IVF Clinic. Ovarian responses to gonadotropin stimulation in control and GH-treated cycles assessed by total dose and duration of hMG treatment, follicular development and peak $E_2$ level, number of eggs retrieved, and fertilization rates were also assessed. In each group, serum and follicular fluid IGF-1 concentrations on day of egg collection were measured by RIA after acidification and extraction by reveresed phase chromatography. Patients receiving G.H. required fewer days and ampules of gonadotropins, developed more oocytes, and more embryos transferred. But, the differences were not statistically significant, except the duration of hMG treatment. Our data showed a significantly higher concentration of IGF-l in the serum, not in the follicular fluid, of patients treated with G.H. compared with control group. These data suggest that growth hormone treatment does not improve the ovarian response in women with limited ovarian reserve to gonadotropin stimulation for IVF.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.2
• /
• pp.94-102
• /
• 2009

Conceptual design of scroll expander and scroll compressor for 10kW-class Stirling engine utilizing solar energy as heat source has been carried out to estimate the applicability of scroll mechanism for Stirling cycle. CO2 was chosen as working fluid, since it has lower expansion index and higher density among probably usable gases. Gas temperature at the expander inlet was set at $700^{\circ}C$, and that at the compressor inlet was at $40^{\circ}C$. System efficiency reached maximum at the pressure ratio of about 2.5, and the peak efficiency increased with increasing high side pressure. Due to safety concern, the pressure condition of 6 MPa/2.5 MPa was chosen as design condition. Orbiting scroll members for the expander and compressor were designed to have double-sided structure in order to reduce the overall scroll size and to cancel out the axial gas forces acting on the orbiting scroll base plate. By parametric study on the scroll profile, smaller possible size for the scroll members was obtained. With the shaft speed of 3600rpm, the shaft output of the designed scroll expander was calculated to be 45.4kW, while input power for the scroll compressor was 34.5kW, yielding 10.9kW for the output power of the Stirling engine. System efficiency was estimated to be about 7.3%, and overall efficiencies of the scroll expander and compressor were around 84.1% and 88.3%, respectively.