• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.345-350
• /
• 2000

Adaptive finite element analysis, which its solution error meets with the user defined allowable error, is recently used far improving reliability of finite element analysis results. This adaptive analysis is composed of two procedures; one is the error estimation of an analysis result and another is the reconstruction of finite elements. In the rp-method, an element size is controlled by relocating of nodal positions(r-method) and the order of an element shape function is determined by the hierarchical polynomial(p-method) corresponding to the element solution error. In order to show the effectiveness and accuracy of the suggested rp-method, various numerical examples were analyzed and these analysis results were examined by comparing with those obtained by the existed methods. As a result of this study, following conclusions are obtained. (1) rp-method is more accurate and effective than the r- and p-method. (2) The solution convergency of the rp-method is controlled by means of the iterative calculation numbers of the r- and p- method each other.

• Journal of the Korean Society of Safety
• /
• v.10 no.4
• /
• pp.81-86
• /
• 1995

In order to apply to analysis methods of mechanism and cross tabulation methods for the influence factors by the accident types to the object of accidents which occurred in R.C and P.C methods among the accidents in construction work sites, the latent hazards in P.C method are evaluated from the data of accidents in H Company from Jan. 1, 1993 to Dec. 31, 1993. The relationship between accident types and unsafe acts, unsafe conditions are recognized and the hazards of R.C method and P.C method are compared from the data acquired by the analysis of causes for a kind of occurrence mechanism. In conclusions, the items such as causes of accidents, accidents types, occurrence time, and the characteristics, are concentrated on one side in the P.C method, which is quite different from R.C method. Therefore the control method for the accident causes is easily established with a lot of effective advantages. The frequency and severity of accidents in P.C method are so low in comparison with R.C method.

• Journal of Korean Physical Therapy Science
• /
• v.7 no.2
• /
• pp.483-494
• /
• 2000

The purpose of this study was to contribute to quality improvement with physical therapy service and determining the factors affecting patients' satisfaction. The study subjects were ambulatory and admitted patients treated with physical therapy at B general hospital located in Taejon from July 15, 2000 to July 21. Authors developed structured questionnaire, and distributed it to each physical therapist of B general hospital. Total number of distributed questionnaire was 164, and 157 questionnaire were collected and analysed finally. Demand of physical therapy for quality improvement(QI) related to treatment time(r =0.746, P<01), treatment method(r =.664, P<.01). treatment effect(r=0.648, P<.01), equipments(r=0.620, P<.01), cleaning status(r =0.619, P<.01). Willingness to revisit and recommendation of this physical therapy room related to treatment method(r=0.489, P<.01), treatment time(r=0.469, P<.01), cleaning status(r=0.432, P<.01).

• Women's Health Nursing
• /
• v.6 no.4
• /
• pp.566-578
• /
• 2000

This study was conducted to ascertain infant's sleep and feeding patterns for the purpose of building up the positive parent-child relationship and setting up a preliminary parenting education program. The subjects were 16 infants who were cared for in their houses. The data was collected using NCASA developed by Barnard et al. from October 1st to December 3lth, 1999. The analysis of data was done with SPSSWIN for descriptive statistics and t-test, ANOVA, Correlation Analysis. The result were as follows: 1. The average day sleep of the infant was 9.51 hours, night sleep was 6.27 hours, and total sleep was 15.84 hours. The longest period of day sleep was 3.02 hours, and the longest period of night sleep was 3.72 hours. The regularity of day sleep was 34.78%, night sleep was 61.72% and total was 43.76%. 2. The frequency of daytime feeding was 5.13 times, nighttime was 2.44 times and total was 7.38 times. The regularity of feeding was 52.14%. 3. In the correlation between sleep and feeding patterns, night sleep was negatively correlated with feeding method(r=-.52, P<0.05), the longest period of day sleep was negatively correlated with feeding method(r=-.73, P<0.001), feeding frequency(r=-.60, P<0.05), the regularity of feeding(r=-.70, P<0.001). The longest period of night sleep was negatively correlated with feeding frequency (r=-.53, P<0.05). Feeding method was positively correlated with feeding frequency(r=.71, P<0.001), the regularity of feeding(r=.57, P<0.05). Day sleep was positively correlated with total sleep(r=.93, P<0.001), the regularity of total sleep was positively correlated with the longest period of day sleep(r=.54, P<0.05), total sleep(r=.65, P<0.001). The regularity of feeding was positively correlated with feeding method(r=.57, P<0.05), total feeding frequency(r=.50, P<0.05), the frequency of daytime feeding(r=.61, P<0.05). Feeding method was positively correlated with total feeding frequency(r=.71, P<0.001). In conclusion, the study showed that infants slept more in the nighttime than in the daytime, but after 3 months the pattern changed and showed that nighttime sleep was increased. Also the regularity of night sleep was increased with the infant's age. Total feeding frequency was decreased with the infant's age, and the regularity of feeding was increased in infants who slept shorter periods in the daytime than in the nighttime.

• Journal of Korean Academy of Nursing
• /
• v.34 no.7
• /
• pp.1184-1193
• /
• 2004

Purpose: The purpose of this study was to explore the relationship of uncertainty, hope and quality of life in patients with breast cancer. Method: The subjects of the study were 113 breast cancer patients treated at 3 university hospitals in Daegu and Busan from June 1 to September 30, 2003. Uncertainty was measured by the Mishel Uncertainty in Il1ness Scale (MUIS), Hope was measured by Nowotny's Hope Scale, and quality of life by Ro's Korean Quality of Life(QOL). Data was analyzed with the SPSS program by t-test, ANOVA, Spearman's rank correlation and Multiple Regression Analysis. Result: The scores of uncertainty were negatively correlated with hope and QOL(all p's<0.05). Uncertainty revealed that there was a negative correlation among subitems of hope such as confidence, relationship with others, possibility of future, and inner motivation(r=-.333, p=.000; r=-.230, p=.015; r=-.260, p=.006; r=-.291, p=.003). Uncertainty also showed a negative correlation among subitems of QOL such as emotional status, self esteem, and relationship with family(r=-.29, p=.004; r=-.326, p=.000; r=-.197, p=.044), whereas hope revealed a positive correlation among subitems of QOL such as emotional status, self esteem, relationship with neighbor, and relationship with family(r=.243, p=.011; r=.487, p=.000; r=.29, p=.001; r=.29, p=.001). The score of uncertainty was low in graduate school students and subjects using problem solving as a coping method. However, the score of hope was high in college students and subjects using a problem solving method, and the score of QOL was high in professionals. Conclusion: Based on the study results, breast cancer patients experienced living with uncertainty and maintaining hope. Thus the study's findings can be useful in directing a comprehensive nursing care plan to improve QOL of breast cancer patients.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.5 s.21
• /
• pp.143-150
• /
• 2004

Nowaday, The tendency of complexity and extension of construction fields increase the need for efficient works managements like a construction management. Consequently, by the introduction of Decision-Making Theories, researches for improving construction field's efficiencies are actively performed. Fuzzy Analytical Hierarchy Process method is invented, so that describes a decision maker's ambiguous linguistic judgment with fuzzy numbers. but most of researches on Fuzzy-AHP use symmetric triangular fuzzy function for estimating each evaluation item with the consequence that exact judgments are impossible. those limits are caused by the point that employed fuzzy ranking methods can not support dissymmetric fuzzy numbers. In this research, we aims to overcome this problem with R.P.R(Relative Preference Ratio) method and suggest improved Fuzzy-AHP method which can use dissymmetric fuzzy triangular numbers.

• Progress in Medical Physics
• /
• v.14 no.4
• /
• pp.268-278
• /
• 2003

Purpose：The aim of this study was to evaluate the striatal binding ratio, the anterior/posterior ratio and reproducibility using a template based registration method using the standard MR template as a replacement for each patients MR image. Materials and Methods：This study analyzed the 123I IPT SPECT images of 30 patients with IPD, who were subdivided into 17 patients (56.6$\pm$10.8 yr, M/F : 8/9.) with mild IPD, and 13 patients (56.4$\pm$11.1 yr, M/F : 8/5) with severe IPD. In addition, 11 normal controls (57.8$\pm$14.4 yr, M/F : 4/7) were also analyzed. The ROIs were positioned manually in the same slice showing the highest striatal activity using the traditional manual method, whereas those were positioned automatically in a mid striatal slice of the SPECT image coregistered to the standard T1 weighted MR template. Results : The specific binding ratio (SBR) obtained using the template based registration method strongly correlated with those using the manual method in all groups : normal controls (r=0.85, P<0.001), mild IPD (r=0.84, P<0.001) and severe IPD (r=0.7, P=0.01). The SBRs obtained using both methods were significantly different among the three groups (P=0.05) and the SBRs obtained by the template based registration method were higher than those by the manual method (P=0.05) in all three groups. The APRs obtained by the template based registration correlated with those using manual method in only mild IPD (r=0.72, P=0.0). The APRs obtained by the template based registration method were significantly different from the normal controls and those with mild or severe IPD (P<0.05), whereas those obtained using the manual method were not significantly different among the three groups (P＞0.1). The reproducibility (rmsCV) of the template based registration method was 7.2% (normal controls：5.2%, mild IPD：4.2%, severe IPD：10.8%), whereas the reproducibility of the manual method was 31% (normal controls：19.7%, mild IPD：21.7%, severe IPD：46.2%). Conclusion：These results show that the use of $^{123}$ I-IPT SPECT for assessing IPD is affected by the methods used to position the striatal ROI. The template based registration method using the standard MR template can be useful in diagnosing IPD and assessing the disease severity with a high reproducibility. Therefore, the template based registration method appears to be a good replacement for the manual method.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.1
• /
• pp.93-101
• /
• 2013

The accurate detection of R-wave is important for other feature extraction in ECG, and R-wave has a lot of medical information about heart. Numerous R-wave detection algorithms have been studied on the ECG signal shape analysis, but it was difficult to find accurate R-wave when the shape of R-wave is similar to the shape of P-wave. This paper presents an R-wave detection method based on the refractory period that is the period of depolarization and repolarization of the cell membrane after excitation. And we also use the shape of kurtosis in the refractory period. The proposed method is validated using the ECG records of the MIT-BIH arrhythmia database. Experimental results show that the proposed method significantly outperforms other method in case of 105 and 108 record that have R-wave similar to P-wave, as well as other records.

• Restorative Dentistry and Endodontics
• /
• v.31 no.1
• /
• pp.11-19
• /
• 2006

The purpose of this study was to compare and evaluate the shaping abilities of various hybrid instrumentation method using constant tapered file systems with $ProTaper\^{(R)}$ S1 and the difference between experts and inexperienced clinicians in use of NiTi file. Three hybrid methods used in this study were composed of $ProTaper\^{(R)}\;S1\;and\;K-Flexofile\^{(R)}\;(group S),\;ProTaper\^{(R)}\;S1\;and\;HeroShaper\^{(R)}\;(group\;H),\;and\;ProTaper\^{(R)}\;S1\;and\;ProFile\^{(R)}\;(group\;P)$respectively. The $ProTaper\^{(R)}$-alone method (group C) was introduced as a control group. After canal preparation, the lapse of time was recorded. The images of pre- and post-operative canal were scanned and superimposed. Amounts of instrumented canal widths and centering ratio were measured at apical 1, 2 and 3 mm levels and statistical analysis was performed In this study. both of the group C and S took more time to prepare canals than other groups, Inexperienced operators required more time for the entire preparation with the groups C and H than the experienced (p<0.05). And the centering ratio of group P were preferable to $ProTaper\^{(R)}$-alone method or the hybrid technique using stainless steel files. As such, within experienced operators, group H also showed better results in addition to the group P. Under these condition, the hybrid methods of each the $ProFile^{(R)}$ system and $HeroShaper^{(R)}$ with ProTaper are recommendable comparative to $ProTaper\^{(R)}$-alone method. According to the results, the hybrid instrumentation method is a more appropriate method of canal preparation than single file system for narrow or curved canals.

• Journal of Korea Foundry Society
• /
• v.20 no.5
• /
• pp.330-335
• /
• 2000

Functional metal prototypes are often required in numerous industrial applications. These components are typically needed in the early stage of a project to determine form, fit and function. Recent R/P(Rapid Prototyping) part are made of soft materials such as plastics, wax, paper, these master models cannot be employed durable test in real harsh working environment. Parts by direct metal rapid tooling method, such as laser sintering, by now are hard to get net shape, pores of the green parts of powder casting method must be infiltrated to get proper strength as tool, and new type of 3D direct tooling system combining fabrication welding arc and cutting process is reported. But a system which can build directly 3D parts of high performance functional material as metal park would get long period of system development, massive investment and other serious obstacles, such as patent. In this paper, through the rapid tooling process as silicon rubber molding using R/P master model, and fabricate wax pattern in that silicon rubber mold using vacuum casting method, then we translated the wax patterns to numerous metal tool prototypes by new investment casting process combined conventional investment casting with rapid prototyping & rapid tooling process. With this wax-injection-mold-free investment casting, we developed new investment casting process of fabricating numerous functional metal prototypes from one master model, combined 3-D CAD, R/P and conventional investment casting and tried to expect net shape measuring total dimension shrinkage from R/P pare to metal part.